This patch series adds the needed clkctrl and ty-sysc nodes for CAL module. It also adds support for the module in related dtsi and dts for DRA72, DRA76 and AM654 SoC. Changes since v3: - Added Tony's ack - Added Rob's ack - In all 3 .dts patch removed unneeded cal 'status = "ok"' lines Changes since v2: - Add non-standard clock node naming to commit message as per Tony's comment Changes since v1: - Fix clock name to make it generic - Updated the binding to use ti,camerrx-control instead of sycon_camerrx - Split off the clk code into its own patch - Add clk mailing list as requested Benoit Parrot (10): clk: ti: dra7: add cam clkctrl data ARM: dts: dra7: add cam clkctrl node ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: dts: DRA72: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra76-evm: Add CAL and OV5640 nodes arm64: dts: k3-am65-main Add CAL node arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera arch/arm/boot/dts/dra7-l4.dtsi | 43 ++++++++++++++++--- arch/arm/boot/dts/dra72-evm-common.dtsi | 31 +++++++++++++ arch/arm/boot/dts/dra72x.dtsi | 42 ++++++++++++++++++ arch/arm/boot/dts/dra76-evm.dts | 35 +++++++++++++++ arch/arm/boot/dts/dra76x.dtsi | 42 ++++++++++++++++++ arch/arm/boot/dts/dra7xx-clocks.dtsi | 14 ++++++ arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 22 ++++++++++ .../arm64/boot/dts/ti/k3-am654-base-board.dts | 32 ++++++++++++++ drivers/clk/ti/clk-7xx.c | 19 ++++++++ include/dt-bindings/clock/dra7.h | 10 +++++ 11 files changed, 285 insertions(+), 7 deletions(-) -- 2.17.1
