[PATCH 03/14] ARM: dts: Configure interconnect target module for dra7 sham

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.

Similar to am3, I could not find any documentation for the sysc
register on this one, but it seems to work just fine based on
"ti,sysc-omap3-sham" compatible style configuration.

Cc: Keerthy <j-keerthy@xxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm/boot/dts/dra7.dtsi | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -685,15 +685,35 @@ des: des@480a5000 {
 			clock-names = "fck";
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
+		sham_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
 			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
 		opp_supply_mpu: opp-supply@4a003b20 {
-- 
2.24.0



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux