On Sun, 15 Dec 2019 09:38:17 -0800
Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> We've had generic code handling module sysconfig and OCP reset registers
> for omap variants for many years now and all the drivers really needs to
> do is just call runtime PM functions.
>
> Looks like the omap-hdq driver got only partially updated over the years
> to use runtime PM, and still has lots of custom PM code left.
>
> We can replace all the custom code for sysconfig, OCP reset, and PM with
> just a few lines of runtime PM autosuspend code.
>
> Note that the earlier driver specific usage count limit of four seems
> completely artificial and should not be an issue in normal use.
>
> Cc: Adam Ford <aford173@xxxxxxxxx>
> Cc: Andrew F. Davis <afd@xxxxxx>
> Cc: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> Cc: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> Cc: Vignesh R <vigneshr@xxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>
>
> Can you guys please review and and test on gta04 and torpedo?
>
[...]
>
> -static int _omap_hdq_reset(struct hdq_data *hdq_data)
> -{
> - int ret;
> - u8 tmp_status;
> -
> - hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
> - OMAP_HDQ_SYSCONFIG_SOFTRESET);
> - /*
> - * Select HDQ/1W mode & enable clocks.
> - * It is observed that INT flags can't be cleared via a read and GO/INIT
> - * won't return to zero if interrupt is disabled. So we always enable
> - * interrupt.
> - */
If I remember correctly this thing is critical to get the hwmod out of
reset but I need to examine that again:
> - hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
> - OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
> - OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK);
> -
> - /* wait for reset to complete */
> - ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS,
> - OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status);
> - if (ret)
> - dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x",
> - tmp_status);
> - else {
> - hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS,
> - OMAP_HDQ_CTRL_STATUS_CLOCKENABLE |
> - OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK |
> - hdq_data->mode);
> - hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG,
> - OMAP_HDQ_SYSCONFIG_AUTOIDLE);
> - }
> -
> - return ret;
> -}
I will probably do more testing the next days.
Regards,
Andreas
