Re: [PATCH 01/17] dt-bindings: remoteproc: Add OMAP remoteproc bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/11/2019 15:27, Rob Herring wrote:
On Wed, Nov 6, 2019 at 6:44 AM Tero Kristo <t-kristo@xxxxxx> wrote:

On 06/11/2019 05:27, Rob Herring wrote:
On Mon, Oct 28, 2019 at 02:42:22PM +0200, Tero Kristo wrote:
From: Suman Anna <s-anna@xxxxxx>

Add the device tree bindings document for the IPU and DSP
remote processor devices on OMAP4+ SoCs.

Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Suman Anna <s-anna@xxxxxx>
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
   .../remoteproc/ti,omap-remoteproc.txt         | 205 ++++++++++++++++++
   1 file changed, 205 insertions(+)
   create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.txt


Looks to be in pretty good shape, but how about doing a schema.

iommu / mailbox is not in schema format, can I just convert this one to
schema without considering those? If yes, I can go ahead and do it.

The client side both have schema (in dt-schema repo).

diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.txt b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.txt
new file mode 100644
index 000000000000..e2bcfcab21c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.txt
@@ -0,0 +1,205 @@
+OMAP4+ Remoteproc Devices
+=========================
+
+The OMAP family of SoCs usually have one or more slave processor sub-systems
+that are used to offload some of the processor-intensive tasks, or to manage
+other hardware accelerators, for achieving various system level goals.
+
+The processor cores in the sub-system are usually behind an IOMMU, and may
+contain additional sub-modules like Internal RAM and/or ROMs, L1 and/or L2
+caches, an Interrupt Controller, a Cache Controller etc.
+
+The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
+sub-system. The DSP processor sub-system can contain any of the TI's C64x,
+C66x or C67x family of DSP cores as the main execution unit. The IPU processor
+sub-system usually contains either a Dual-Core Cortex-M3 or Dual-Core Cortex-M4
+processors.
+
+Remote Processor Node:
+======================
+Each remote processor sub-system is represented as a single DT node. Each node
+has a number of required or optional properties that enable the OS running on
+the host processor (MPU) to perform the device management of the remote
+processor and to communicate with the remote processor. The various properties
+can be classified as constant or variable. The constant properties are dictated
+by the SoC and does not change from one board to another having the same SoC.
+Examples of constant properties include 'iommus', 'reg'. The variable properties
+are dictated by the system integration aspects such as memory on the board, or
+configuration used within the corresponding firmware image. Examples of variable
+properties include 'mboxes', 'memory-region', 'timers', 'watchdog-timers' etc.
+
+Required properties:
+--------------------
+The following are the mandatory properties:
+
+- compatible:       Should be one of the following,
+                "ti,omap4-dsp" for DSPs on OMAP4 SoCs
+                "ti,omap5-dsp" for DSPs on OMAP5 SoCs
+                "ti,dra7-dsp" for DSPs on DRA7xx/AM57xx SoCs
+                "ti,omap4-ipu" for IPUs on OMAP4 SoCs
+                "ti,omap5-ipu" for IPUs on OMAP5 SoCs
+                "ti,dra7-ipu" for IPUs on DRA7xx/AM57xx SoCs
+
+- iommus:   phandles to OMAP IOMMU nodes, that need to be programmed
+            for this remote processor to access any external RAM memory or
+            other peripheral device address spaces. This property usually
+            has only a single phandle. Multiple phandles are used only in
+            cases where the sub-system has different ports for different
+            sub-modules within the processor sub-system (eg: DRA7 DSPs),
+            and need the same programming in both the MMUs.

^ the target of this is not in schema.

You mean the OMAP IOMMU binding? That doesn't matter at all.

Yeah, OMAP IOMMU.

Ok, if it does not matter, I will just convert this all. Will send v2 once I am done.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux