On Wed, Aug 14, 2019 at 5:18 PM Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote:
>
> _opp_supported_by_regulators() wrongly ignored errors from
> regulator_is_supported_voltage(), so it considered errors as
> success. Since
> commit 498209445124 ("regulator: core: simplify return value on suported_voltage")
> regulator_is_supported_voltage() returns a real boolean, so
> errors make _opp_supported_by_regulators() return false.
>
> That reveals a problem with the declaration of the VDD1/2
> regulators on twl4030.
> The VDD1/VDD2 regulators on twl4030 are neither defined with
> voltage lists nor with the continuous flag set, so
> regulator_is_supported_voltage() returns false and an error
> before above mentioned commit (which was considered success)
> The result is that after the above mentioned commit cpufreq
> does not work properly e.g. dm3730.
>
> [ 2.490997] core: _opp_supported_by_regulators: OPP minuV: 1012500 maxuV: 1012500, not supported by regulator
> [ 2.501617] cpu cpu0: _opp_add: OPP not supported by regulators (300000000)
> [ 2.509246] core: _opp_supported_by_regulators: OPP minuV: 1200000 maxuV: 1200000, not supported by regulator
> [ 2.519775] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
> [ 2.527313] core: _opp_supported_by_regulators: OPP minuV: 1325000 maxuV: 1325000, not supported by regulator
> [ 2.537750] cpu cpu0: _opp_add: OPP not supported by regulators (800000000)
>
> The patch fixes declaration of VDD1/2 regulators by
> adding proper voltage lists.
>
> Fixes: 498209445124 ("regulator: core: simplify return value on suported_voltage")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
Tested-by: Adam Ford <aford173@xxxxxxxxx> #logicpd-torpedo-37xx-devkit
> ---
> resent because it was rejected by mailing lists, due to technical
> issues, sorry for the noise.
> changes in v2:
> using a proper voltage list instead of misusing the continuous flag
> subject was regulator: twl: mark vdd1/2 as continuous on twl4030
>
> drivers/regulator/twl-regulator.c | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
> index 6fa15b2d6fb3..866b4dd01da9 100644
> --- a/drivers/regulator/twl-regulator.c
> +++ b/drivers/regulator/twl-regulator.c
> @@ -359,6 +359,17 @@ static const u16 VINTANA2_VSEL_table[] = {
> 2500, 2750,
> };
>
> +/* 600mV to 1450mV in 12.5 mV steps */
> +static const struct regulator_linear_range VDD1_ranges[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
> +};
> +
> +/* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
> +static const struct regulator_linear_range VDD2_ranges[] = {
> + REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
> + REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
> +};
> +
> static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
> {
> struct twlreg_info *info = rdev_get_drvdata(rdev);
> @@ -427,6 +438,8 @@ static int twl4030smps_get_voltage(struct regulator_dev *rdev)
> }
>
> static const struct regulator_ops twl4030smps_ops = {
> + .list_voltage = regulator_list_voltage_linear_range,
> +
> .set_voltage = twl4030smps_set_voltage,
> .get_voltage = twl4030smps_get_voltage,
> };
> @@ -466,7 +479,8 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> }, \
> }
>
> -#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \
> +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
> + n_volt) \
> static const struct twlreg_info TWL4030_INFO_##label = { \
> .base = offset, \
> .id = num, \
> @@ -479,6 +493,9 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
> .owner = THIS_MODULE, \
> .enable_time = turnon_delay, \
> .of_map_mode = twl4030reg_map_mode, \
> + .n_voltages = n_volt, \
> + .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
> + .linear_ranges = label ## _ranges, \
> }, \
> }
>
> @@ -518,8 +535,8 @@ TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
> TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
> TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
> TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
> -TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08);
> -TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08);
> +TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
> +TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
> /* VUSBCP is managed *only* by the USB subchip */
> TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
> TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
> --
> 2.20.1
>
