Linux LEDS Development

• Thread Index

• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 1/4] device property: document device_for_each_child_node macro
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] leds: as3645a: use device_* to iterate over device child nodes
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6] platform/x86: Add wmi driver for Casper Excalibur laptops
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6] platform/x86: Add wmi driver for Casper Excalibur laptops
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 4/4] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 3/4] net: mvpp2: use port_count to remove ports
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 2/4] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 1/4] device property: document device_for_each_child_node macro
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v3 0/4] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: lm3601x: Reset led controller during init
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8] Add multicolor support to BlinkM LED driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/7] mfd: add base driver for qnap-mcu devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad7768-1: use device_* to iterate over device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/7] Input: add driver for the input part of qnap-mcu devices
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 2/7] mfd: add base driver for qnap-mcu devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS a0864cf32044233e56247fa0eed3ac660f15db9e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] coresight: cti: use device_* to iterate over device child nodes
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2] leds: lm3601x: Reset led controller during init
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: [PATCH] leds: lm3601x: reset led controller during init
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: [PATCH] leds: lm3601x: reset led controller during init
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/4] coresight: cti: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 1/4] coresight: cti: use device_* to iterate over device child nodes
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 2/4] iio: adc: ad7768-1: use device_* to iterate over device child nodes
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH 4/4] leds: as3645a: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/4] iio: adc: xilinx-ams: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/4] iio: adc: ad7768-1: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/4] coresight: cti: use device_* to iterate over device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/4] use device_for_each_child_node_scoped to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: (subset) [PATCH v5 0/3] Add sy7802 flash led driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v3 4/7] Input: add driver for the input part of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 5/7] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 2/7] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 3/7] leds: add driver for LEDs from qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 0/7] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 6/7] arm64: dts: rockchip: hook up the MCU on the QNAP TS433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3 7/7] arm64: dts: rockchip: set hdd led labels on qnap-ts433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 5/7] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: microchip: Rename node, sub-node, and clean up spacing
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• [PATCH RESEND v6] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH] leds: lm3601x: reset led controller during init
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] leds: add driver for LEDs from qnap-mcu devices
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 3/7] leds: add driver for LEDs from qnap-mcu devices
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v2 4/7] Input: add driver for the input part of qnap-mcu devices
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2 5/7] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 6/7] arm64: dts: rockchip: hook up the MCU on the QNAP TS433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 4/7] Input: add driver for the input part of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 2/7] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 3/7] leds: add driver for LEDs from qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 0/7] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: rockchip: set hdd led labels on qnap-ts433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH 5/7] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: mfd: add binding for qnap,mcu devices
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] leds: ns2: add missing check for fwnode_property_read_u32_array
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: leds: remove led_brightness
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• [PATCH 4/7] Input: add driver for the input part of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 2/7] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 5/7] hwmon: add driver for the hwmon parts of qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 3/7] leds: add driver for LEDs from qnap-mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 0/7] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 1/7] dt-bindings: mfd: add binding for qnap,mcu devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 6/7] arm64: dts: rockchip: hook up the MCU on the QNAP TS433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 7/7] arm64: dts: rockchip: set hdd led labels on qnap-ts433
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: (subset) [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: [RESEND LEDs] leds: remove led_brightness
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: Set num_leds after allocation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: leds: sc2731-bltc: convert to YAML
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/4] leds: pca9532: Use hardware for blinking LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v8] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: ns2: add missing check for fwnode_property_read_u32_array
  • From: Chen Ni <nichen@xxxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: lm3601x: Calculate max_brightness and brightness properly
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: In kernel virtual HID devices (was Future handling of complex RGB devices on Linux v3)
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: In kernel virtual HID devices (was Future handling of complex RGB devices on Linux v3)
  • From: Pavel Machek <pavel@xxxxxx>
• Keybaords with arrays of RGB LEDs was Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v3 2/2] leds: Add LED1202 I2C driverr
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 2/2] leds: Add LED1202 I2C driverr
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 5/6] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 4/6] leds: is31fl319x: use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 3/6] leds: bd2606mvv: fix device child node usage in bd2606mvv_probe()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 1/6] device property: document device_for_each_child_node macro
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [RESEND LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add LED1202 I2C driverr
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add LED1202 I2C driverr
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v3 2/2] leds: Add LED1202 I2C driverr
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v4 27/28] gcc-sdm845: Add general purpose clock ops
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [LEDs] leds: remove led_brightness
  • From: Guilherme Giácomo Simões <trintaeoitogc@xxxxxxxxx>
• Re: [PATCH] leds: gpio: Set num_leds after allocation
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] leds: gpio: Set num_leds after allocation
  • From: Kees Cook <kees@xxxxxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: sc2731-bltc: convert to YAML
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v6] platform/x86: Add wmi driver for Casper Excalibur laptops
  • From: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
• [PATCH v6] platform/x86: Add wmi driver for Casper Excalibur laptops
  • From: Mustafa Ekşi <mustafa.eskieksi@xxxxxxxxx>
• [PATCH] dt-bindings: leds: sc2731-bltc: convert to YAML
  • From: Stanislav Jakubek <stano.jakubek@xxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS b0eed397623f897d3ccac9bda2bd2f53331b571a
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD REGRESSION d9cc80b1c9b40a33c022e125b7f9555813c7f385
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [lee-leds:for-leds-next 65/65] drivers/leds/leds-lp5569.c:204:52: error: passing argument 3 of 'lp55xx_read' from incompatible pointer type
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 3/3] leds: leds-lp5569: Enable chip after chip configuration
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 2/3] leds: leds-lp5569: Better handle enabling clock internal setting
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 1/3] leds: leds-lp5569: Fix typo in driver name
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [lee-leds:for-leds-next 65/65] drivers/leds/leds-lp5569.c:204:31: error: incompatible pointer types passing 'int *' to parameter of type 'u8 *' (aka 'unsigned char *')
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next 65/65] drivers/leds/leds-lp5569.c:204:52: error: passing argument 3 of 'lp55xx_read' from incompatible pointer type
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] leds: leds-lp5569: Fix typo in driver name
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] HP: wmi: added support for 4 zone keyboard rgb
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v4 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v3 4/4] leds: pca9532: Change default blinking frequency to 1Hz
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v3 3/4] leds: pca9532: Explicitly disable hardware blink when PWM1 is unavailable
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v3 2/4] leds: pca9532: Use PWM1 for hardware blinking
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v3 1/4] leds: pca9532: Use defines to select PWM instance
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v3 0/4] leds: pca9532: Use hardware for blinking LEDs
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: pca9532: Use PWM1 for hardware blinking
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] leds: pca9532: Use PWM1 for hardware blinking
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v3 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v8] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v2 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH v2 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v1 net-next] leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v2 2/4] leds: pca9532: Use PWM1 for hardware blinking
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 2/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH 0/2] leds: leds-pca995x: Add support for NXP PCA9956B
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: pca995x: Add new nxp,pca9956b compatible
  • From: Pieterjan Camerlynck via B4 Relay <devnull+pieterjanca.gmail.com@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD REGRESSION b9bd590268485652b928110b5543057543b5d02b
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next 61/62] drivers/leds/leds-lp5521.c:189:15: error: too many arguments provided to function-like macro invocation
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next 61/62] drivers/leds/leds-lp55xx-common.c:798:17: warning: unused variable 'ret'
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next 61/62] drivers/leds/leds-lp5521.c:189:33: error: macro "guard" passed 2 arguments, but takes just 1
  • From: kernel test robot <lkp@xxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, LEDs and Platform due for the v6.11 merge window[GIT PULL] Immutable branch between MFD, LEDs and Platform due for the v6.11 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 23/23] arm64: dts: qcom: starqltechn: add new features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 23/23] arm64: dts: qcom: starqltechn: add new features
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Document "netdev" trigger
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2] dt-bindings: leds: Document "netdev" trigger
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Document "netdev" trigger
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Document "netdev" trigger
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v6] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• Re: Re: [PATCH] HP: wmi: added support for 4 zone keyboard rgb
  • From: Carlos Ferreira <carlosmiguelferreira.2003@xxxxxxxxx>
• Re: [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] leds: is31fl319x: use device_for_each_child_node_scoped() to access child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] device property: document device_for_each_child_node macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Document "netdev" trigger
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 6/6] net: mvpp2: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 5/6] leds: pca995x: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 4/6] leds: is31fl319x: use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 3/6] leds: bd2606mvv: use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/6] hwmon: (ltc2992) use device_for_each_child_node_scoped() to access child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/6] device property: document device_for_each_child_node macro
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/6] use device_for_each_child_node() to access device child nodes
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH] dt-bindings: leds: Document "netdev" trigger
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH RESEND v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• Re: [PATCH] leds: lm3601x: Calculate max_brightness and brightness properly
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• [PATCH v2] leds: lm3601x: Calculate max_brightness and brightness properly
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• [PATCH] leds: lm3601x: Calculate max_brightness and brightness properly
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: [PATCH] leds:lm3601x:calculate max_brightness and brightness properly
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: flash: leds-qcom-flash: Test the correct variable in init
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds:lm3601x:calculate max_brightness and brightness properly
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] leds: leds-lp5569: Convert to sysfs_emit API
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: flash: leds-qcom-flash: Test the correct variable in init
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH 3/3] leds: leds-lp5569: Enable chip after chip configuration
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 2/3] leds: leds-lp5569: Better handle enabling clock internal setting
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 1/3] leds: leds-lp5569: Fix typo in driver name
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH] leds:lm3601x:calculate max_brightness and brightness properly
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• Re: [PATCH 0/2] Add driver for keyboard backlight on Magic keyboards found on T2 Macs
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• [lee-leds:ib-leds-mfd-6.11] BUILD SUCCESS b107093f433c3afb83a46af43c830e578e2ba54d
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] HID: hid-apple-magic-backlight: Add driver for keyboard backlight on internal Magic Keyboards
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• [PATCH 1/2] Documentation: leds: standardise keyboard backlight led names
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• [PATCH 0/2] Add driver for keyboard backlight on Magic keyboards found on T2 Macs
  • From: Aditya Garg <gargaditya08@xxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: intel,lgm: drop inactive maintainers from intel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 940b27161afc6ec53fc66245a4fb3518394cdc92
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/1] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Lucca fachinetti <luccafachinetti@xxxxxxxxx>
• Re: [PATCH] dt-bindings: intel,lgm: drop inactive maintainers from intel
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: intel,lgm: drop inactive maintainers from intel
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH] leds: lp5562: Add multicolor brightness control
  • From: Michal Vokáč <michal.vokac@xxxxxxxxx>
• Re: [3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH] dt-bindings: intel,lgm: drop inactive maintainers from intel
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: (subset) [PATCH v2] Revert "leds: led-core: Fix refcount leak in of_led_get()"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH 3/3] leds: leds-lp55xx: Convert mutex lock/unlock to guard API
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 2/3] leds: leds-lp5523: Convert to sysfs_emit API
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 1/3] leds: leds-lp5569: Convert to sysfs_emit API
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v8 15/20] leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v7 10/20] leds: leds-lp55xx: Generalize led_brightness function
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: (subset) [PATCH v5 0/3] Add sy7802 flash led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v8 19/20] leds: leds-lp55xx: Drop deprecated defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v8 17/20] leds: leds-lp55xx: Generalize sysfs master_fader
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 20/20] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 18/20] leds: leds-lp55xx: Support ENGINE program up to 128 bytes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 16/20] leds: leds-lp55xx: Generalize sysfs engine_leds
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 15/20] leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 14/20] leds: leds-lp55xx: Generalize stop_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 12/20] leds: leds-lp55xx: Generalize set_led_current function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 13/20] leds: leds-lp55xx: Generalize turn_off_channels function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 11/20] leds: leds-lp55xx: Generalize multicolor_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 10/20] leds: leds-lp55xx: Generalize led_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 09/20] leds: leds-lp55xx: Generalize firmware_loaded function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 08/20] leds: leds-lp55xx: Generalize update_program_memory function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 07/20] leds: leds-lp55xx: Generalize run_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 06/20] leds: leds-lp55xx: Generalize load_engine_and_select_page function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 05/20] leds: leds-lp55xx: Generalize load_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 04/20] leds: leds-lp55xx: Generalize probe/remove functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 03/20] leds: leds-lp55xx: Generalize stop_all_engine OP
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 02/20] dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 01/20] dt-bindings: leds-lp55xx: Limit pwr-sel property to ti,lp8501
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v8 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/1] leds: core: Omit set_brightness error message for a LED supporting hw trigger only
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Thomas Weißschuh <thomas@xxxxxxxx>
• [PATCH] dt-bindings: intel,lgm: drop inactive maintainers from intel
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v2] Revert "leds: led-core: Fix refcount leak in of_led_get()"
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH] Revert "leds: led-core: Fix refcount leak in of_led_get()"
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH] Revert "leds: led-core: Fix refcount leak in of_led_get()"
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH] Revert "leds: led-core: Fix refcount leak in of_led_get()"
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 0/3] Add sy7802 flash led driver
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v5 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• Re: [PATCH 1/1] leds: core: Omit set_brightness error message for a LED supporting hw trigger only
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [GIT PULL] Immutable branch between LEDS and MFD due for the v6.11 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v7 20/20] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 19/20] leds: leds-lp55xx: Drop deprecated defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 18/20] leds: leds-lp55xx: Support ENGINE program up to 128 bytes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 17/20] leds: leds-lp55xx: Generalize sysfs master_fader
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 16/20] leds: leds-lp55xx: Generalize sysfs engine_leds
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 15/20] leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 14/20] leds: leds-lp55xx: Generalize stop_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 13/20] leds: leds-lp55xx: Generalize turn_off_channels function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 12/20] leds: leds-lp55xx: Generalize set_led_current function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 11/20] leds: leds-lp55xx: Generalize multicolor_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 10/20] leds: leds-lp55xx: Generalize led_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 09/20] leds: leds-lp55xx: Generalize firmware_loaded function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 08/20] leds: leds-lp55xx: Generalize update_program_memory function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 07/20] leds: leds-lp55xx: Generalize run_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 06/20] leds: leds-lp55xx: Generalize load_engine_and_select_page function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 05/20] leds: leds-lp55xx: Generalize load_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 04/20] leds: leds-lp55xx: Generalize probe/remove functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 03/20] leds: leds-lp55xx: Generalize stop_all_engine OP
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 02/20] dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 01/20] dt-bindings: leds-lp55xx: Limit pwr-sel property to ti,lp8501
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 16/23] leds: max77705: Add LEDs support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 11/23] drm/panel: Add support for S6E3HA8 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/5] ChromeOS Embedded Controller LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 0/4] leds: pca9532: Use hardware for blinking LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 07/23] dt-bindings: power: supply: add maxim,max77705
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 19/23] power: supply: s2dos05: Add fuel gauge driver for s2dos05
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 18/23] regulator: add s2dos05 regulator support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 17/23] mfd: add s2dos series core driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 14/23] power: supply: max77705: Add charger driver for Maxim 77705
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 13/23] input: add max77705 haptic driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 20/20] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 12/23] mfd: Add new driver for MAX77705 PMIC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 10/23] dt-bindings: regulator: add samsung,s2dos05
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 09/23] dt-bindings: mfd: add samsung,s2dos05
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 06/23] dt-bindings: power: supply: add maxim,max77705 charger
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 05/23] dt-bindings: input: add maxim,max77705-haptic
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 04/23] dt-bindings: mfd: add maxim,max77705
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 03/23] dt-bindings: panel: add Samsung s6e3ha8
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 04/20] leds: leds-lp55xx: generalize probe/remove functions
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH 1/1] leds: trigger: input-events: Rewrite to fix a serious locking issue
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/1] leds: core: Omit set_brightness error message for a LED supporting hw trigger only
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 18/23] regulator: add s2dos05 regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 18/23] regulator: add s2dos05 regulator support
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v3 11/23] drm/panel: Add support for S6E3HA8 panel driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 11/23] drm/panel: Add support for S6E3HA8 panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 09/23] dt-bindings: mfd: add samsung,s2dos05
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 07/23] dt-bindings: power: supply: add maxim,max77705
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 04/23] dt-bindings: mfd: add maxim,max77705
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v3 18/23] regulator: add s2dos05 regulator support
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 07/23] dt-bindings: power: supply: add maxim,max77705
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 00/23] This is continued work on Samsung S9(SM-9600) starqltechn
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 08/23] dt-bindings: led: add maxim,max77705-leds
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v3 22/23] arm64: dts: qcom: starqltechn: fix usb regulator mistake
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• Re: [PATCH v3 23/23] arm64: dts: qcom: starqltechn: add new features
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 18/23] regulator: add s2dos05 regulator support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 22/23] arm64: dts: qcom: starqltechn: fix usb regulator mistake
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 21/23] arm64: dts: qcom: starqltechn: remove framebuffer
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 20/23] arm64: dts: qcom: starqltechn: remove wifi
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v3 16/23] leds: max77705: Add LEDs support
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 06/23] dt-bindings: power: supply: add maxim,max77705 charger
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 23/23] arm64: dts: qcom: starqltechn: add new features
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 22/23] arm64: dts: qcom: starqltechn: fix usb regulator mistake
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 21/23] arm64: dts: qcom: starqltechn: remove framebuffer
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 20/23] arm64: dts: qcom: starqltechn: remove wifi
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 19/23] power: supply: s2dos05: Add fuel gauge driver for s2dos05
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 17/23] mfd: add s2dos series core driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 15/23] power: supply: max77705: Add fuel gauge driver for Maxim 77705
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 14/23] power: supply: max77705: Add charger driver for Maxim 77705
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 13/23] input: add max77705 haptic driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 12/23] mfd: Add new driver for MAX77705 PMIC
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 11/23] drm/panel: Add support for S6E3HA8 panel driver
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 10/23] dt-bindings: regulator: add samsung,s2dos05
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 09/23] dt-bindings: mfd: add samsung,s2dos05
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 05/23] dt-bindings: input: add maxim,max77705-haptic
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 04/23] dt-bindings: mfd: add maxim,max77705
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 03/23] dt-bindings: panel: add Samsung s6e3ha8
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 02/23] gcc-sdm845: Add rates to the GP clocks
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v3 01/23] power: supply: add undervoltage health status property
  • From: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
• [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] leds: Add LED1202 I2C driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/2] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 7c85503b6d597b84ea58fe3dd95cd9eaeb1f3206
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v1 2/2] leds: Add LED1202 I2C driver
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: leds: Add LED1202 LED Controller
  • From: Vicentiu Galanopulo <vicentiu.galanopulo@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] leds: pca9532: Explicitly disable hardware blink when PWM1 is unavailable
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 4/4] leds: pca9532: Change default blinking frequency to 1Hz
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 2/4] leds: pca9532: Use PWM1 for hardware blinking
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 1/4] leds: pca9532: Use defines to select PWM instance
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 0/4] leds: pca9532: Use hardware for blinking LEDs
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v6 20/20] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 19/20] leds: leds-lp55xx: drop deprecated defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 18/20] leds: leds-lp55xx: support ENGINE program up to 128 bytes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 17/20] leds: leds-lp55xx: generalize sysfs master_fader
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 16/20] leds: leds-lp55xx: generalize sysfs engine_leds
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 15/20] leds: leds-lp55xx: generalize sysfs engine_load and engine_mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 14/20] leds: leds-lp55xx: generalize stop_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 13/20] leds: leds-lp55xx: generalize turn_off_channels function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 12/20] leds: leds-lp55xx: generalize set_led_current function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 11/20] leds: leds-lp55xx: generalize multicolor_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 10/20] leds: leds-lp55xx: generalize led_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 09/20] leds: leds-lp55xx: generalize firmware_loaded function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 08/20] leds: leds-lp55xx: generalize update_program_memory function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 07/20] leds: leds-lp55xx: generalize run_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 06/20] leds: leds-lp55xx: generalize load_engine_and_select_page function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 05/20] leds: leds-lp55xx: generalize load_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 04/20] leds: leds-lp55xx: generalize probe/remove functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 03/20] leds: leds-lp55xx: generalize stop_all_engine OP
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 02/20] dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 01/20] dt-bindings: leds-lp55xx: limit pwr-sel property to ti,lp8501
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v4 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v4 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v4 0/3] Add sy7802 flash led driver
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Thorsten Leemhuis <linux@xxxxxxxxxxxxx>
• Re: [PATCH v5 05/20] leds: leds-lp55xx: generalize load_engine function
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 03/20] leds: leds-lp55xx: generalize stop_all_engine OP
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 05/20] leds: leds-lp55xx: generalize load_engine function
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 20/20] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 19/20] leds: leds-lp55xx: drop deprecated defines
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 18/20] leds: leds-lp55xx: support ENGINE program up to 128 bytes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 17/20] leds: leds-lp55xx: generalize sysfs master_fader
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 16/20] leds: leds-lp55xx: generalize sysfs engine_leds
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 15/20] leds: leds-lp55xx: generalize sysfs engine_load and engine_mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 14/20] leds: leds-lp55xx: generalize stop_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 13/20] leds: leds-lp55xx: generalize turn_off_channels function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 12/20] leds: leds-lp55xx: generalize set_led_current function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 11/20] leds: leds-lp55xx: generalize multicolor_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 10/20] leds: leds-lp55xx: generalize led_brightness function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 09/20] leds: leds-lp55xx: generalize firmware_loaded function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 08/20] leds: leds-lp55xx: generalize update_program_memory function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 07/20] leds: leds-lp55xx: generalize run_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 06/20] leds: leds-lp55xx: generalize load_engine_and_select_page function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 05/20] leds: leds-lp55xx: generalize load_engine function
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 04/20] leds: leds-lp55xx: generalize probe/remove functions
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 03/20] leds: leds-lp55xx: generalize stop_all_engine OP
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 02/20] dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 01/20] dt-bindings: leds-lp55xx: limit pwr-sel property to ti,lp8501
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 00/20] leds: leds-lp55xx: overhaul driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/1] leds: trigger: input-events: Rewrite to fix a serious locking issue
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] leds: cros_ec: Implement review comments from Lee
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/5] leds: Add ChromeOS EC driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 4/5] leds: Add ChromeOS EC driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] ChromeOS Embedded Controller LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/5] ChromeOS Embedded Controller LED driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] ChromeOS Embedded Controller LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 4/5] leds: Add ChromeOS EC driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 3/4] platform/chrome: cros_kbd_led_backlight: allow binding through mfd device
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v3 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: (subset) [PATCH v3 linux-next] leds: powernv: replace of_node_put to __free
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: mt6360: fix memory leak in mt6360_init_isnk_properties()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH linux-next] leds: tlc591xx: Replace of_node_put to __free
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH 1/2] leds: rgb: leds-qcom-lpg: Add PPG check for setting/clearing PBS triggers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 linux-next] leds: powernv: replace of_node_put to __free
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: triggers: flush pending brightness before activating trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 0/6] leds: spi-byte: Cleanup, fix a leak, and make it agnostic
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: ncp5623: Use common error handling code in ncp5623_probe()
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2] leds: triggers: flush pending brightness before activating trigger
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: triggers: flush pending brightness before activating trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 5/5] mfd: cros_ec: Register LED subdevice
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ChromeOS Embedded Controller LED driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v3 4/5] leds: Add ChromeOS EC driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v3 3/5] leds: core: Unexport led_colors[] array
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v3 2/5] leds: multicolor: Use led_get_color_name() function
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v3 0/5] ChromeOS Embedded Controller LED driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v3 1/5] leds: core: Introduce led_get_color_name() function
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: ncp5623: Use common error handling code in ncp5623_probe()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/5] ChromeOS Embedded Controller LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 3/4] platform/chrome: cros_kbd_led_backlight: allow binding through mfd device
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/1] leds: trigger: input-events: Rewrite to fix a serious locking issue
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RFC 1/2] leds: trigger: input-events: Replace led_on with a flags field
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7] Add multicolor support to BlinkM LED driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v7] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 3/3] leds: leds-lp5569: Add support for Texas Instruments LP5569
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 1/1] leds: core: Omit set_brightness error message for a LED supporting hw trigger only
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH v3 3/3] arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v3 2/3] leds: sy7802: Add support for Silergy SY7802 flash LED controller
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• [PATCH v3 0/3] Add sy7802 flash led driver
  • From: André Apitzsch via B4 Relay <devnull+git.apitzsch.eu@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH] leds: mt6360: fix memory leak in mt6360_init_isnk_properties()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 0/2] leds: Add a driver for MP3326
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 2/2] leds: add mp3326 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH V2 0/2] leds: Add a driver for MP3326
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH V2 2/2] leds: add mp3326 driver
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2 2/2] leds: add mp3326 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: mt6360: fix memory leak in mt6360_init_isnk_properties()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] leds: mt6360: fix memory leak in mt6360_init_isnk_properties()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH V2 2/2] leds: add mp3326 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 0/2] leds: Add a driver for MP3326
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V2 0/2] leds: Add a driver for MP3326
  • From: Yuxi Wang <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 2/2] leds: add mp3326 driver
  • From: Yuxi Wang <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH V2 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Yuxi Wang <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH linux-next] leds: tlc591xx: Replace of_node_put to __free
  • From: Marilene A Garcia <marilene.agarcia@xxxxxxxxx>
• [PATCH] leds: mt6360: fix memory leak in mt6360_init_isnk_properties()
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] leds: rgb: leds-qcom-lpg: Add PPG check for setting/clearing PBS triggers
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Genes Lists <lists@xxxxxxxxxxxx>
• Re: [PATCH v3 linux-next] leds: powernv: replace of_node_put to __free
  • From: Marilene Andrade Garcia <marilene.agarcia@xxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] leds: class: Revert: "If no default trigger is given, make hw_control trigger the default trigger"
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/2] leds: rgb: leds-qcom-lpg: Fix line wrapping style issues
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/2] leds: rgb: leds-qcom-lpg: Add PPG check for setting/clearing PBS triggers
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v1 1/6] leds: spi-byte: call of_node_put() on error path
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/6] leds: spi-byte: Utilise temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 6/6] leds: spi-byte: Move OF ID table closer to their user
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/6] leds: spi-byte: Get rid of custom led_init_default_state_get()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/6] leds: spi-byte: Use devm_mutex_init() for mutex initialization
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/6] leds: spi-byte: call of_node_put() on error path
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/6] leds: spi-byte: Cleanup, fix a leak, and make it agnostic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/6] leds: spi-byte: Make use of device properties
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Genes Lists <lists@xxxxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 0/3] power: supply: power-supply-leds: Add activate() callback to triggers
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [PATCH] leds: ncp5623: Use common error handling code in ncp5623_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/3] leds: pca9532: Use PWM1 for hardware blinking
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: "Gautham R. Shenoy" <gautham.shenoy@xxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
• Re: [PATCH] leds: triggers: flush pending brightness before activating trigger
  • From: Dustin Howett <dustin@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• 6.10rc2/BUG: KASAN: slab-use-after-free in set_device_name+0xe1/0x490 [ledtrig_netdev]
  • From: Mikhail Gavrilov <mikhail.v.gavrilov@xxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Zhihao Cheng <chengzhihao1@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH] leds: triggers: flush pending brightness before activating trigger
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v1 1/1] treewide: Align match_string() with sysfs_match_string()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ChromeOS Embedded Controller LED driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Bananapi R3 Mini
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] platform/chrome: cros_kbd_led_backlight: allow binding through mfd device
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v3 0/4] cros_kbd_led_backlight: allow binding through cros_ec mfd device
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v2 0/5] ChromeOS Embedded Controller LED driver
  • From: Dustin Howett <dustin@xxxxxxxxxx>
• [PATCH 1/1] leds: trigger: input-events: Rewrite to fix a serious locking issue
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/1] leds: trigger: input-events: Rewrite to fix a serious locking issue
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 2/2] leds: trigger: input-events: Fix locking issues of input_lock vs led-trigger locks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 2/2] leds: trigger: input-events: Fix locking issues of input_lock vs led-trigger locks
  • From: Hillf Danton <hdanton@xxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 2/2] leds: trigger: input-events: Fix locking issues of input_lock vs led-trigger locks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 1/2] leds: trigger: input-events: Replace led_on with a flags field
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 0/2] leds: trigger: input-events: Fix locking issues of input_lock vs led-trigger locks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 005408af25d5550e1bd22a18bf371651969c17ee
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Aw: Re: [PATCH v3 1/2] dt-bindings: arm64: mediatek: add BananaPi R3 Mini
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• [lee-leds:ib-leds-platform-power-6.11] BUILD SUCCESS 9af12f57f1f9785f231d31a7365ad244c656b7ff
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v3 linux-next] leds: powernv: replace of_node_put to __free
  • From: MarileneGarcia <marilene.agarcia@xxxxxxxxx>
• Re: [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v1 2/4] iio: light: lm3533-als: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] backlight: lm3533_bl: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/4] lm3533: Remove the outdated drivers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] mfd: lm3533: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] leds: lm3533: Remove the driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 linux-next] leds: powernv: replace of_node_put to __free
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2 5/5] mfd: cros_ec: Register LED subdevice
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v2 4/5] leds: Add ChromeOS EC driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v2 3/5] leds: core: Unexport led_colors[] array
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v2 1/5] leds: core: Introduce led_get_color_name() function
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v2 2/5] leds: multicolor: Use led_get_color_name() function
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• [PATCH v2 0/5] ChromeOS Embedded Controller LED driver
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] cros_kbd_led_backlight: allow binding through cros_ec mfd device
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH v3 1/1] leds: trigger: Add new LED Input events trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/4] cros_kbd_led_backlight: allow binding through cros_ec mfd device
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/4] cros_kbd_led_backlight: allow binding through cros_ec mfd device
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] leds: introduce led_color_name function
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/4] cros_kbd_led_backlight: allow binding through cros_ec mfd device
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH 1/1] leds: ss4200: Convert PCIBIOS_* return codes to errnos
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] leds: pca9532: Use PWM1 for hardware blinking
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 0/2] backlight: Add new lm3509 backlight driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] power: supply: power-supply-leds: Add activate() callback to triggers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 1/1] leds: trigger: Add new LED Input events trigger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 0/1] leds: trigger: Add new LED Input events trigger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [GIT PULL] Immutable branch between LEDs, Power and RGB due for the v6.11 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: trigger: Add new LED Input events trigger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/3] power: supply: power-supply-leds: Add activate() callback to triggers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/3] power: supply: power-supply-leds: Share trig pointer for online and charging_full
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/3] power: supply: power-supply-leds: Add power_supply_[un]register_led_trigger()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/3] power: supply: power-supply-leds: Add activate() callback to triggers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: bcm63138: add MODULE_DESCRIPTION()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: simatic-ipc-leds: add missing MODULE_DESCRIPTION() macros
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: rt4505: add MODULE_DESCRIPTION()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2] leds: flash: leds-qcom-flash: limit LED current based on thermal condition
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] power: supply: power-supply-leds: Add activate() callback to triggers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Hung tasks due to a AB-BA deadlock between the leds_list_lock rwsem and the rtnl mutex
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: (subset) [PATCH] leds: trigger: Call synchronize_rcu() before calling trig->activate()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: trigger: Call synchronize_rcu() before calling trig->activate()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: trigger: Add new LED Input events trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] power: supply: power-supply-leds: Add power_supply_[un]register_led_trigger()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v10 0/6] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2] leds: trigger: Call synchronize_rcu() before calling trig->activate()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v10 0/6] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Lee Jones <lee@xxxxxxxxxx>