Re: [PATCH 6/9] hwmon: Add support for Photonicat PMU board temperature sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2024/9/6 19:41, Guenter Roeck wrote:
> On 9/6/24 02:36, Junhao Xie wrote:
>> Photonicat PMU MCU will send status reports regularly,
>> including board temperature.
>>
> 
> This is not an appropriate description.

I will change to a better description.

> 
>> Signed-off-by: Junhao Xie <bigfoot@xxxxxxxxxxx>
>> ---
>>   drivers/hwmon/Kconfig            |  10 +++
>>   drivers/hwmon/Makefile           |   1 +
>>   drivers/hwmon/photonicat-hwmon.c | 129 +++++++++++++++++++++++++++++++
> 
> Documentation missing.

Does it need to be placed in Documentation/hwmon/photonicat-hwmon.rst?

> 
>> +static int pcat_hwmon_probe(struct platform_device *pdev)
>> +{
> ...
>> +    dev_info(dev, "Board Temprature: %d degress C\n", hwmon->temperature);
>> +
> 
> Unacceptable (misspelled) noise.
> 
>> +    hwmon->hwmon = devm_hwmon_device_register_with_groups(
>> +        dev, label, hwmon, pcat_pmu_temp_groups);
>> +
> 
> Please use the with_info API. I am not going to review the code because
> it will need to be completely rewritten.
> 
> Guenter
> 

Thanks for your review, I will rewrite this driver!

Best regards,
Junhao




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux