The update_hw_blink() function prints an error message when hardware is
not able to handle a blink configuration on its own. IMHO, this isn't a
'real' error since the software fallback is used afterwards.
Remove the error messages to avoid flooding the logs with unnecessary
messages.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 48ca7f302cfc ("leds: pca9532: Use PWM1 for hardware blinking")
Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
drivers/leds/leds-pca9532.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 9f3fac66a11c..bcc3063bd441 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -215,8 +215,7 @@ static int pca9532_update_hw_blink(struct pca9532_led *led,
if (other->state == PCA9532_PWM1) {
if (other->ldev.blink_delay_on != delay_on ||
other->ldev.blink_delay_off != delay_off) {
- dev_err(&led->client->dev,
- "HW can handle only one blink configuration at a time\n");
+ /* HW can handle only one blink configuration at a time */
return -EINVAL;
}
}
@@ -224,7 +223,7 @@ static int pca9532_update_hw_blink(struct pca9532_led *led,
psc = ((delay_on + delay_off) * PCA9532_PWM_PERIOD_DIV - 1) / 1000;
if (psc > U8_MAX) {
- dev_err(&led->client->dev, "Blink period too long to be handled by hardware\n");
+ /* Blink period too long to be handled by hardware */
return -EINVAL;
}
--
2.45.0
