Re: [PATCH 5/5] ARM: dts: microchip: Rename LED sub nodes name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16.08.2024 12:06, Alexander Dahl wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hello Andrei,
> 
> Am Fri, Aug 16, 2024 at 08:52:14AM +0000 schrieb Andrei.Simion@xxxxxxxxxxxxx:
>> Hello Alex,
>>
>> On 15.08.2024 10:57, Alexander Dahl wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Hello Andrei,
>>>> Am Wed, Aug 14, 2024 at 03:26:33PM +0300 schrieb Andrei Simion:
>>>> dtbs_check warnings:
>>>> leds: 'd[0-9]', 'ds[0-9]' do not match any of the regexes:
>>>> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>>>> leds: 'red', 'green', 'blue' do not match any of regexes:
>>>> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>>>>
>>>> Rename the led sub nodes according to devicetree
>>>> specification and leds-gpio.yaml.
>>>>
>>>> Signed-off-by: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
>>>> ---
>>>> Split the bloadted patch into small patches on topics
>>>> based on comments:
>>>> https://lore.kernel.org/linux-arm-kernel/89f51615-0dee-4ab0-ab72-e3c057fee1e7@xxxxxxxxx/
>>>> ---
>>>>  arch/arm/boot/dts/microchip/aks-cdu.dts        | 8 ++++----
>>>>  arch/arm/boot/dts/microchip/animeo_ip.dts      | 8 ++++----
>>>>  arch/arm/boot/dts/microchip/at91-sam9x60ek.dts | 6 +++---
>>>>  arch/arm/boot/dts/microchip/at91rm9200ek.dts   | 6 +++---
>>>>  arch/arm/boot/dts/microchip/at91sam9260ek.dts  | 4 ++--
>>>>  arch/arm/boot/dts/microchip/at91sam9261ek.dts  | 6 +++---
>>>>  arch/arm/boot/dts/microchip/at91sam9263ek.dts  | 4 ++--
>>>>  arch/arm/boot/dts/microchip/at91sam9g20ek.dts  | 4 ++--
>>>>  8 files changed, 23 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts
>>>> index 52e166c8a365..95a0639c5579 100644
>>>> --- a/arch/arm/boot/dts/microchip/aks-cdu.dts
>>>> +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts
>>>> @@ -98,23 +98,23 @@ rootfs@500000 {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             red {
>>>> +             led-red {
>>>>                       gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "none";
>>>>               };
>>>>
>>>> -             green {
>>>> +             led-green {
>>>>                       gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "none";
>>>>                       default-state = "on";
>>>>               };
>>>>
>>>> -             yellow {
>>>> +             led-yellow {
>>>>                       gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "none";
>>>>               };
>>>>
>>>> -             blue {
>>>> +             led-blue {
>>>>                       gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "none";
>>>>               };
>>>
>>> As reported with <20240730-rambling-helping-2f03f5ddee6a@xxxxxxxxxxx>
>>> already, this will probably change sysfs paths and thus might break
>>> userspace depending on those paths.  Did you consider adding a label
>>> to avoid this?
>>>
>>> (Added linux-leds to Cc.)
>>>
>>
>> https://elixir.bootlin.com/linux/v6.11-rc3/source/Documentation/devicetree/bindings/leds/common.yaml#L54
>> Based on the information provided above: "If omitted, the label is
>> taken from the node name (excluding the unit address)." and "This
>> property is deprecated"
>> So, in your opinion what should I do? use function and color?
>> My patch reason is to rename the label to avoid the warnings.
> 
> I understood the intention, and I appreciate the effort of eliminating
> those warnings.  I would add the label property here and use the
> previous node name as value.  The deprecation statement makes sense
> when introducing new nodes with new LEDs.  In this case there's
> already a somewhat deprecated name, but if that should stay stable,
> then in my opinion adding the label property is the best choice.
> 
> Example, before:
> 
>   yellow {
>     gpios = < ... >;
>     linux,default-trigger = ...;
>   };
> 
> After:
> 
>   led-yellow {
>     label = "yellow";
>     gpios = < ... >;
>     linux,default-trigger = ...;
>   };
> 
> This way the sysfs path should be /sys/class/leds/yellow before and
> after, and the dts warnings be gone, right?
> 

OK. I will create one more patch for this patch set in the 
next version, and I will add you as Suggested-by.

Best Regards,
Andrei 

> Greets
> Alex
> 
>>
>> Best Regards,
>> Andrei Simion
>>
>>> Greets
>>> Alex
>>>
>>>> diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts
>>>> index 911c8d9ee013..52ac840bcd35 100644
>>>> --- a/arch/arm/boot/dts/microchip/animeo_ip.dts
>>>> +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts
>>>> @@ -146,23 +146,23 @@ ohci: usb@500000 {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             power_green {
>>>> +             led-power-green {
>>>>                       label = "power_green";
>>>>                       gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "heartbeat";
>>>>               };
>>>>
>>>> -             power_red {
>>>> +             led-power-red {
>>>>                       label = "power_red";
>>>>                       gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
>>>>               };
>>>>
>>>> -             tx_green {
>>>> +             led-tx-green {
>>>>                       label = "tx_green";
>>>>                       gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
>>>>               };
>>>>
>>>> -             tx_red {
>>>> +             led-tx-red {
>>>>                       label = "tx_red";
>>>>                       gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
>>>>               };
>>>> diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
>>>> index b9a21f9f9a6d..da31b07d6828 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
>>>> @@ -53,17 +53,17 @@ leds {
>>>>               pinctrl-0 = <&pinctrl_gpio_leds>;
>>>>               status = "okay"; /* Conflict with pwm0. */
>>>>
>>>> -             red {
>>>> +             led-red {
>>>>                       label = "red";
>>>>                       gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
>>>>               };
>>>>
>>>> -             green {
>>>> +             led-green {
>>>>                       label = "green";
>>>>                       gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
>>>>               };
>>>>
>>>> -             blue {
>>>> +             led-blue {
>>>>                       label = "blue";
>>>>                       gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "heartbeat";
>>>> diff --git a/arch/arm/boot/dts/microchip/at91rm9200ek.dts b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
>>>> index 3089912dd6be..641d443e6ca9 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91rm9200ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91rm9200ek.dts
>>>> @@ -127,19 +127,19 @@ root@350000  {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             ds2 {
>>>> +             led-ds2 {
>>>>                       label = "green";
>>>>                       gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "mmc0";
>>>>               };
>>>>
>>>> -             ds4 {
>>>> +             led-ds4 {
>>>>                       label = "yellow";
>>>>                       gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "heartbeat";
>>>>               };
>>>>
>>>> -             ds6 {
>>>> +             led-ds6 {
>>>>                       label = "red";
>>>>                       gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
>>>>               };
>>>> diff --git a/arch/arm/boot/dts/microchip/at91sam9260ek.dts b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
>>>> index ed259e2cb853..4933971d0585 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91sam9260ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91sam9260ek.dts
>>>> @@ -174,13 +174,13 @@ eeprom@50 {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             ds1 {
>>>> +             led-ds1 {
>>>>                       label = "ds1";
>>>>                       gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "heartbeat";
>>>>               };
>>>>
>>>> -             ds5 {
>>>> +             led-ds5 {
>>>>                       label = "ds5";
>>>>                       gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>>>>               };
>>>> diff --git a/arch/arm/boot/dts/microchip/at91sam9261ek.dts b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
>>>> index 4d9269cc5f32..9c44177db714 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91sam9261ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91sam9261ek.dts
>>>> @@ -192,19 +192,19 @@ watchdog@fffffd40 {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             ds8 {
>>>> +             led-ds8 {
>>>>                       label = "ds8";
>>>>                       gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "none";
>>>>               };
>>>>
>>>> -             ds7 {
>>>> +             led-ds7 {
>>>>                       label = "ds7";
>>>>                       gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "nand-disk";
>>>>               };
>>>>
>>>> -             ds1 {
>>>> +             led-ds1 {
>>>>                       label = "ds1";
>>>>                       gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "heartbeat";
>>>> diff --git a/arch/arm/boot/dts/microchip/at91sam9263ek.dts b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
>>>> index a8ea36db4c04..cf5434f9449d 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91sam9263ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91sam9263ek.dts
>>>> @@ -219,13 +219,13 @@ &pioA 21 GPIO_ACTIVE_HIGH
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             d3 {
>>>> +             led-d3 {
>>>>                       label = "d3";
>>>>                       gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "heartbeat";
>>>>               };
>>>>
>>>> -             d2 {
>>>> +             led-d2 {
>>>>                       label = "d2";
>>>>                       gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
>>>>                       linux,default-trigger = "nand-disk";
>>>> diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
>>>> index 6de7a7cd3c07..1e62fd371ddb 100644
>>>> --- a/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
>>>> +++ b/arch/arm/boot/dts/microchip/at91sam9g20ek.dts
>>>> @@ -14,13 +14,13 @@ / {
>>>>       leds {
>>>>               compatible = "gpio-leds";
>>>>
>>>> -             ds1 {
>>>> +             led-ds1 {
>>>>                       label = "ds1";
>>>>                       gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
>>>>                       linux,default-trigger = "heartbeat";
>>>>               };
>>>>
>>>> -             ds5 {
>>>> +             led-ds5 {
>>>>                       label = "ds5";
>>>>                       gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
>>>>               };
>>>> --
>>>> 2.34.1
>>>>
>>>>
>>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux