Linux LEDS Development

• Thread Index

• [RFC PATCH v2 10/13] regulator: bd71828: Support in-kernel APIs to change run-level
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 09/13] regulator: bd71828: enhanced run-level support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 08/13] regulator: bd71828: Add GPIO based run-level control for regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 07/13] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 06/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 05/13] clk: bd718x7: Support ROHM BD71828 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 04/13] mfd: input: bd71828: Add power-key support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 02/13] dt-bindings: mfd: Document ROHM BD71828 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 03/13] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 01/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH v2 00/13] Support ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH V9 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: meter: add leds-meter binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: meter: add leds-meter binding
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH 00/36] ARM: samsung platform cleanup
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 00/36] ARM: samsung platform cleanup
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: meter: add leds-meter binding
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v14 04/19] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH V9 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 5/6] backlight: qcom-wled: add support for short circuit handling.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 3/6] backlight: qcom-wled: Restructure the driver for WLED3.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 2/6] backlight: qcom-wled: Rename PM8941* to WLED3
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 1/6] backlight: qcom-wled: Add new properties for PMI8998.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V9 0/6] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] leds: meter: add leds-meter binding
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH 1/2] leds: add LED level meter driver
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH 0/2] leds: add generic LED level meter driver
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V8 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V8 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v7 2/2] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v7 1/2] dt-bindings: leds: document the "power-supply" property
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v7 0/2] Subject: [PATCH v7 0/2] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 6/6] MAINTAINERS: update the list of maintained files for max77650
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 5/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 4/6] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 3/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 1/6] dt-bindings: input: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V8 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V8 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v13 04/18] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 04/19] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 12/19] leds: lp55xx: Convert LED class registration to devm_*
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v14 12/19] leds: lp55xx: Convert LED class registration to devm_*
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v14 12/19] leds: lp55xx: Convert LED class registration to devm_*
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 00/46] ARM: pxa: towards multiplatform support
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 05/46] ARM: pxa: split up mach/hardware.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH V8 3/6] backlight: qcom-wled: Restructure the driver for WLED3.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 5/6] backlight: qcom-wled: add support for short circuit handling.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 2/6] backlight: qcom-wled: Rename PM8941* to WLED3
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 1/6] backlight: qcom-wled: Add new properties for PMI8998.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V8 0/6] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH v14 00/19] MultiColor Framework v14
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 02/19] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 01/19] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 14/19] leds: lp5523: Update the lp5523 code to add multicolor brightness function
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 04/19] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 03/19] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 06/19] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 15/19] leds: lp5521: Add multicolor framework multicolor brightness support
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 12/19] leds: lp55xx: Convert LED class registration to devm_*
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 16/19] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 05/19] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 13/19] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 19/19] leds: lp55xx-common: Remove extern from lp55xx-common header
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 17/19] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 09/19] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 08/19] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 18/19] dt: bindings: Update lp55xx binding to recommended LED naming
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 10/19] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 11/19] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v14 07/19] dt: bindings: lp55xx: Be consistent in the document with LED acronym
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: input: max77650: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v13 09/18] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH V7 5/6] backlight: qcom-wled: add support for short circuit handling.
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V7 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V7 5/6] backlight: qcom-wled: add support for short circuit handling.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V7 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: "Vaittinen, Matti" <Matti.Vaittinen@xxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [RFC PATCH 13/13] dt-bindings: regulator: Document ROHM BD71282 regulator bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 12/13] dt-bindings: mfd: Document ROHM BD71282 bindings
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 11/13] led: bd71828: Support LED outputs on ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 10/13] gpio: bd71828: Initial support for ROHM BD71828 PMIC GPIOs
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 09/13] mfd: rtc: support RTC on ROHM BD71828 with BD70528 driver
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 08/13] regulator: bd71828: Support in-kernel APIs to change run-level
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 07/13] regulator: bd71828: enhanced run-level support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 06/13] regulator: bd71828: Add GPIO based run-level control for regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 05/13] regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 04/13] regulator: bd718x7: Split driver to common and bd718x7 specific parts
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 03/13] clk: bd718x7: Support ROHM BD71828 clk block
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 02/13] mfd: input: bd71828: Add power-key support
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 01/13] mfd: bd71828: Support ROHM BD71828 PMIC - core
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [RFC PATCH 00/13] Support ROHM BD71828 PMIC
  • From: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: input: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 6/6] MAINTAINERS: update the list of maintained files for max77650
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v13 13/18] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v13 13/18] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v13 06/18] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 04/18] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 01/18] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 00/18] Multicolor Framework v13
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 02/18] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 11/18] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 15/18] leds: lp5521: Add multicolor framework multicolor brightness support
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 14/18] leds: lp5523: Update the lp5523 code to add multicolor brightness function
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 13/18] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 17/18] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 08/18] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 10/18] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 18/18] dt: bindings: Update lp55xx binding to recommended LED naming
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 09/18] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 05/18] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 16/18] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 12/18] leds: lp55xx: Convert LED class registration to devm_*
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 07/18] dt: bindings: lp55xx: Be consistent in the document with LED acronym
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v13 03/18] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v2] leds: an30259a: add a check for devm_regmap_init_i2c
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2] leds: an30259a: add a check for devm_regmap_init_i2c
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH] leds: an30259a: add a check for devm_regmap_init_i2c
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] leds: an30259a: add a check for devm_regmap_init_i2c
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH v11 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v11 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V7 6/6] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 5/6] backlight: qcom-wled: add support for short circuit handling.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 4/6] backlight: qcom-wled: Add support for WLED4 peripheral.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 3/6] backlight: qcom-wled: Restructure the driver for WLED3
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 2/6] backlight: qcom-wled: Rename PM8941* to WLED3.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 1/6] backlight: qcom-wled: Add new properties for PMI8998
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V7 0/6] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [RESEND PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 6/6] MAINTAINERS: update the list of maintained files for max77650
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/6] dt-bindings: input: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V6 3/8] backlight: qcom-wled: Add new properties for PMI8998
  • From: kgunda@xxxxxxxxxxxxxx
• Re: [PATCH 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH] leds: pca963x: Fix open-drain initialization
  • From: Zahari Petkov <zahari@xxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH] leds: tlc591xx: update the maximum brightness
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 5/5] backlight: add led-backlight driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V6 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: Add docs for EL15203000
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: Add docs for EL15203000
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: tlc591xx: update the maximum brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 1/2] dt-bindings: Add docs for EL15203000
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH V6 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 3/5] leds: Add managed API to get a LED from a device driver
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: tlc591xx: update the maximum brightness
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v12 00/16] Multicolor Framework v12
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v12 00/16] Multicolor Framework v12
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v12 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 07/16] dt: bindings: lp55xx: Be consistent in the document with LED acronym
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 13/16] leds: lp5523: Update the lp5523 code to add intensity function
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 14/16] leds: lp5521: Add multicolor framework intensity support
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 16/16] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 10/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 15/16] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 02/16] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 05/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 03/16] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v12 00/16] Multicolor Framework v12
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 4/8] dt-bindings: memory-controllers: Convert Samsung Exynos SROM bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 00/36] ARM: samsung platform cleanup
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pwm: Convert PWM bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v11 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v10 4/6] dts-bindings: leds: Document the naming requirement for LED properties
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
• Re: [PATCH v11 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v11 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: leds in -next -- update address was Re: [GIT PULL] LED fixes for 5.4-rc3.
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v11 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v10 5/6] dt-bindings: backlight: Add led-backlight binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 4/6] dts-bindings: leds: Document the naming requirement for LED properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• leds in -next -- update address was Re: [GIT PULL] LED fixes for 5.4-rc3.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v10 1/6] leds: populate the device's of_node
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH v10 5/6] dt-bindings: backlight: Add led-backlight binding
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 3/6] leds: Add managed API to get a LED from a device driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 1/6] leds: populate the device's of_node
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 6/6] backlight: add led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 4/6] dts-bindings: leds: Document the naming requirement for LED properties
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 2/6] leds: Add of_led_get() and led_put()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v10 0/6] Add a generic driver for LED-based backlight
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [GIT PULL] LED fixes for 5.4-rc3.
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: pwm: Convert PWM bindings to json-schema
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• Re: [GIT PULL] LED fixes for 5.4-rc3.
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v11 07/16] dt: bindings: lp55xx: Be consistent in the document with LED acronym
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 03/16] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 05/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 13/16] leds: lp5523: Update the lp5523 code to add intensity function
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 02/16] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 00/16] Multicolor Framework v11
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 14/16] leds: lp5521: Add multicolor framework intensity support
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 16/16] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 10/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 15/16] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• [GIT PULL] LED fixes for 5.4-rc3.
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v8 0/5] Add a generic driver for LED-based backlight
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] Add my linux-leds branch to MAINTAINERS
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v9 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v9 0/5] Add a generic driver for LED-based backlight
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v9 5/5] backlight: add led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v9 3/5] leds: Add managed API to get a LED from a device driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v9 2/5] leds: Add of_led_get() and led_put()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v9 1/5] leds: populate the device's of_node
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v10 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v6 4/4] net: phy: realtek: Add LED configuration support for RTL8211E
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v10 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Bjorn Andersson <bjorn@xxxxxxx>
• Re: [PATCH V2] arm64: dts: imx8mn-ddr4-evk: Enable GPIO LED
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v6 2/2] leds: Add control of the voltage/current regulator to the LED core
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v10 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 00/10] Stop NULLifying match pointer in of_match_device()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 01/10] leds: pca953x: Use of_device_get_match_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 1/5] leds: populate the device's of_node when possible
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v6 2/2] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v6 1/2] dt-bindings: leds: document the "power-supply" property
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v6 0/2] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 5/5] backlight: add led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH] leds: gpio: support multi-level brightness
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH] leds: gpio: support multi-level brightness
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v7 5/5] backlight: add led-backlight driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH V6 5/8] backlight: qcom-wled: Restructure the driver for WLED3
  • From: kgunda@xxxxxxxxxxxxxx
• Re: Should regulator core support parsing OF based fwnode? (was: Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put())
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Should regulator core support parsing OF based fwnode?
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v2 1/6] leds: flash: Remove extern from the header file
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Should regulator core support parsing OF based fwnode? (was: Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put())
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 5/5] backlight: add led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v8 5/5] backlight: add led-backlight driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v4 2/2] backlight: lm3630a: Add an enable gpio for the HWEN pin
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: backlight: lm3630a: Add enable-gpios to describe HWEN pin
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 0/5] Add a generic driver for LED-based backlight
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v8 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v8 3/5] leds: Add managed API to get a LED from a device driver
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• [PATCH v8 3/5] leds: Add managed API to get a LED from a device driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v8 0/5] Add a generic driver for LED-based backlight
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v8 2/5] leds: Add of_led_get() and led_put()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v8 5/5] backlight: add led-backlight driver
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v8 4/5] dt-bindings: backlight: Add led-backlight binding
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v8 1/5] leds: populate the device's of_node when possible
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH 4/5] leds: flash: Add devm_* functions to the flash class
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 3/5] leds: flash: Remove extern from the header file
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v7 1/5] leds: populate the device's of_node when possible
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH AUTOSEL 5.2 121/185] leds: lm3532: Fixes for the driver for stability
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RFC PATCH] leds: core: Fix LED_COLOR_MAX_ID
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [RFC PATCH] leds: core: Fix LED_COLOR_MAX_ID
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH -next 0/2] leds: add substitutes for /sys/class/leds/<led>/trigger
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: pwm: Convert PWM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [RFC PATCH] leds: core: Fix LED_COLOR_MAX_ID
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v10 00/16] Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next 1/2] leds: add /sys/devices/virtual/led-trigger/
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next 1/2] leds: add /sys/devices/virtual/led-trigger/
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH -next 2/2] leds: add /sys/class/leds/<led>/current-trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH -next 1/2] leds: add /sys/devices/virtual/led-trigger/
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH -next 0/2] leds: add substitutes for /sys/class/leds/<led>/trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v7 1/5] leds: populate the device's of_node when possible
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v2 4/6] leds: core: Remove extern from header
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 1/6] leds: flash: Remove extern from the header file
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 6/6] leds: core: Fix leds.h structure documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 3/6] leds: lm3601x: Convert class registration to device managed
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 5/6] leds: core: Fix devm_classdev_match to reference correct structure
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 2/6] leds: flash: Add devm_* functions to the flash class
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 4/5] leds: flash: Add devm_* functions to the flash class
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 3/5] leds: flash: Remove extern from the header file
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/5] leds: Kconfig: Be consistent with the usage of "LED"
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 4/5] leds: flash: Add devm_* functions to the flash class
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 4/5] leds: flash: Add devm_* functions to the flash class
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 3/5] leds: flash: Remove extern from the header file
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 5/5] leds: lm3601x: Convert class registration to device managed
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 5/5] leds: lm3601x: Convert class registration to device managed
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH 5/5] leds: lm3601x: Convert class registration to device managed
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 2/5] leds: flash: Convert non extended registration to inline
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 4/5] leds: flash: Add devm_* functions to the flash class
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 1/5] leds: Kconfig: Be consistent with the usage of "LED"
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH 3/5] leds: flash: Remove extern from the header file
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: sram: Convert SRAM bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V6 5/8] backlight: qcom-wled: Restructure the driver for WLED3
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V6 3/8] backlight: qcom-wled: Add new properties for PMI8998
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V6 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH V6 1/8] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 02/16] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 00/16] Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 05/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 01/16] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 13/16] leds: lp5523: Update the lp5523 code to add intensity function
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 15/16] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 16/16] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 12/16] leds: lp55xx: Add multicolor framework support to lp55xx
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 07/16] dt: bindings: lp55xx: Be consistent in the document with LED acronym
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 04/16] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 14/16] leds: lp5521: Add multicolor framework intensity support
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 08/16] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 10/16] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v10 03/16] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 2/8] dt-bindings: sram: Convert SRAM bindings to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH 1/2] leds: Add flag to keep trigger always
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/6] dt-bindings: input: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/6] dt-bindings: max77650: convert the device-tree bindings to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/6] dt-bindings: regulator: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/6] dt-bindings: power: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 5/6] dt-bindings: leds: max77650: convert the binding document to yaml
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 6/6] MAINTAINERS: update the list of maintained files for max77650
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH V6 8/8] backlight: qcom-wled: Add auto string detection logic
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 7/8] backlight: qcom-wled: add support for short circuit handling.
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 6/8] backlight: qcom-wled: Add support for WLED4 peripheral
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 5/8] backlight: qcom-wled: Restructure the driver for WLED3
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 4/8] backlight: qcom-wled: Rename PM8941* to WLED3
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 3/8] backlight: qcom-wled: Add new properties for PMI8998
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 2/8] backlight: qcom-wled: restructure the qcom-wled bindings
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 1/8] backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH V6 0/8] backlight: qcom-wled: Support for QCOM wled driver
  • From: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• [PATCH v3 0/1] leds: fix /sys/class/leds/<led>/trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Pavel Machek <pavel@xxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] leds: tlc591xx: simplify driver by using the managed led API
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 2/2] leds: tlc591xx: use devm_led_classdev_register_ext()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 02/15] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 15/15] leds: lp5523: Fix checkpatch issues in the code
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 06/15] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 10/15] ARM: dts: n900: Add reg property to the LP5523 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 07/15] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 09/15] dt: bindings: lp55xx: Update binding for Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 01/15] leds: multicolor: Add sysfs interface definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 11/15] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 05/15] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 04/15] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 14/15] leds: lp55xx: Fix checkpatch file permissions issues
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 00/15] Multicolor Framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 13/15] leds: lp55xx: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 12/15] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v9 03/15] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v2 1/1] leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v7 3/5] leds: Add managed API to get a LED from a device driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v7 2/5] leds: Add of_led_get() and led_put()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v7 1/5] leds: populate the device's of_node when possible
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: tlc591xx: update the maximum brightness
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 0/5] leds: lm3692x: Probing and flag fixes
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: leds: apu: drop obsolete support for apu>=2
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/9] documention: leds: Add multicolor class documentation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 2/9] documention: leds: Add multicolor class documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v8 1/9] leds: multicolor: Add sysfs interface definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 3/5] leds: lm3692x: Handle failure to probe the regulator
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v3 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v5 2/3] dt-bindings: leds: document the "power-supply" property
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v5 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v5 0/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v5 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH] leds: tlc591xx: update the maximum brightness
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v4 2/2] leds: tlc591xx: use devm_led_classdev_register_ext()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH AUTOSEL 5.2 011/185] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 008/128] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 091/185] led: triggers: Fix a memory leak bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 121/185] leds: lm3532: Fixes for the driver for stability
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 101/203] led: triggers: Fix a memory leak bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 066/128] led: triggers: Fix a memory leak bug
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 05/89] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 05/60] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 04/44] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 132/203] leds: lm3532: Fixes for the driver for stability
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.3 013/203] leds: leds-lp5562 allow firmware files up to the maximum length
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v3 5/5] leds: lm3692x: Use flags from LM3692X_BRT_CTRL
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 1/5] leds: lm3692x: Print error value on dev_err
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 0/5] leds: lm3692x: Probing and flag fixes
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 4/5] leds: lm3692x: Use flags from LM3692X_BOOST_CTRL
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v3 3/5] leds: lm3692x: Handle failure to probe the regulator
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] leds: mlxreg: Fix possible buffer overflow
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 9/9] leds: Update the lp55xx to use the multi color framework
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 9/9] leds: Update the lp55xx to use the multi color framework
  • From: lkp <lkp@xxxxxxxxx>
• Re: [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 5/9] leds: Add multicolor ID to the color ID list
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 4/9] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 2/9] documention: leds: Add multicolor class documentation
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 1/9] leds: multicolor: Add sysfs interface definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v4 2/2] leds: tlc591xx: use devm_led_classdev_register_ext()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v2] leds-bcm6328: Use devm_platform_ioremap_resource() in bcm6328_leds_probe()
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v8 0/9] Multicolor FW v8 update
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v8 5/9] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 0/9] Multicolor FW v8 update
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 1/9] leds: multicolor: Add sysfs interface definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 2/9] documention: leds: Add multicolor class documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v8 4/9] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v2 5/8] dt-bindings: watchdog: Convert Samsung SoC watchdog bindings to json-schema
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 8/8] dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v2] leds-bcm6358: Use devm_platform_ioremap_resource() in bcm6358_leds_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2] leds-bcm6328: Use devm_platform_ioremap_resource() in bcm6328_leds_probe()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v3 2/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v6 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v4 1/3] led: make led_set_brightness_sync() use led_set_brightness_nosleep()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 3/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 2/3] dt-bindings: leds: document the "power-supply" property
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 0/3] leds: Add control of the voltage/current regulator to the LED core
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 2/2] leds: tlc591xx: use devm_led_classdev_register_ext()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 1/2] leds: tlc591xx: simplify driver by using the managed led API
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• [PATCH v4 0/2] leds: tlc591xx: switch to managed LED registration
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
• Re: [PATCH v2 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v2 5/5] leds: lm3692x: Use flags from LM3692X_BRT_CTRL
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 1/5] leds: lm3692x: Print error value on dev_err
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 4/5] leds: lm3692x: Use flags from LM3692X_BOOST_CTRL
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 2/5] leds: lm3692x: Don't overwrite return value in error path
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 0/5] leds: lm3692x: Probing and flag fixes
  • From: Guido Günther <agx@xxxxxxxxxxx>
• [PATCH v2 3/5] leds: lm3692x: Handle failure to probe the regulator
  • From: Guido Günther <agx@xxxxxxxxxxx>
• Re: [PATCH v6 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v3 1/2] leds: tlc591xx: simplify driver by using the managed led API
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds-bcm63xx: Use devm_platform_ioremap_resource() in two functions
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] drivers: leds: tlc591xx: check error during device init
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 2/2] leds: add LED driver for EL15203000 board
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v11 1/2] dt-bindings: Add docs for EL15203000
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• Re: [PATCH v11 1/2] dt-bindings: Add docs for EL15203000
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v7 1/9] leds: multicolor: Add sysfs interface definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 2/9] documention: leds: Add multicolor class documentation
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 0/9] Multicolor Framework updates
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 6/9] leds: multicolor: Introduce a multicolor class definition
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 4/9] dt-bindings: leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 5/9] leds: Add multicolor ID to the color ID list
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 9/9] leds: Update the lp55xx to use the multi color framework
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v7 3/9] dt: bindings: Add multicolor class dt bindings documention
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: [PATCH v11 1/2] dt-bindings: Add docs for EL15203000
  • From: Dan Murphy <dmurphy@xxxxxx>
• [PATCH v11 2/2] leds: add LED driver for EL15203000 board
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>
• [PATCH v11 1/2] dt-bindings: Add docs for EL15203000
  • From: Oleh Kravchenko <oleg@xxxxxxxxxx>