[PATCH v4 2/3] dt-bindings: leds: document the "power-supply" property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Most of the LEDs are powered by a voltage/current regulator. Describing it
in the device-tree makes it possible for the LED core to enable/disable it
when needed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
---
 Documentation/devicetree/bindings/leds/common.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 9fa6f9795d50..54857c16573d 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -77,6 +77,11 @@ Optional properties for child nodes:
 - panic-indicator : This property specifies that the LED should be used,
 		    if at all possible, as a panic indicator.
 
+- power-supply : A voltage/current regulator used to to power the LED. When a
+		 LED is turned off, the LED core disable its regulator. The
+		 same regulator can power many LED (or other) devices. It is
+		 turned off only when all of its users disabled it.
+
 - trigger-sources : List of devices which should be used as a source triggering
 		    this LED activity. Some LEDs can be related to a specific
 		    device and should somehow indicate its state. E.g. USB 2.0
@@ -124,6 +129,7 @@ led-controller@0 {
 		function = LED_FUNCTION_STATUS;
 		linux,default-trigger = "heartbeat";
 		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&led_regulator>;
 	};
 
 	led1 {
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux