[PATCH v9 08/15] dt: bindings: lp55xx: Be consistent in the document with LED

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update the document to be consistent in case when using LED.
This should be capital throughout the document.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
 Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index 1b66a413fb9d..bfe2805c5534 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,4 +1,4 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of
@@ -12,8 +12,8 @@ Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin
-- 
2.22.0.214.g8dca754b1e




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux