Re: [PATCH v10 4/6] dts-bindings: leds: Document the naming requirement for LED properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 09/10/2019 21:26, Rob Herring wrote:
On Wed, Oct 09, 2019 at 10:51:25AM +0200, Jean-Jacques Hiblot wrote:
LED properties must be named "leds" in the same way that PWM, clocks or
PHY properties are names respectively "pwms", "clocks" and "phys".

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
---
  .../devicetree/bindings/leds/common.txt       | 20 ++++++++++++++++---
  1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index 9fa6f9795d50..31b8c1f68d27 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -10,6 +10,9 @@ can influence the way of the LED device initialization, the LED components
  have to be tightly coupled with the LED device binding. They are represented
  by child nodes of the parent LED device binding.
+LED properties should be named "leds". The exact meaning of each leds
+property must be documented in the device tree binding for each device.
+
This is worded oddly. The property is 'leds' and it is always a list of
phandles to LED device nodes. It is present in an LED consumer device.

How about:

[...]

A LED consumer device has a 'leds' property. This property is always a list
of phandles to LED nodes (child node of a LED device node).

led_device {
    ...

    led0: led@0 {
        ...
    };

    led1: led@1 {
        ...
    };
};

consumer {
    ...
    leds = <led0>, <led1>;
};


Optional properties for child nodes:
  - led-sources : List of device current outputs the LED is connected to. The
@@ -165,9 +168,20 @@ led-controller@30 {
  		function-enumerator = <2>;
          };
- led@3 {
+        bkl_led0: led@3 {
  		reg = <3>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <3>;
+		function = LED_FUNCTION_BACKLIGHT;
+		function-enumerator = <1>;
          };
+
+        bkl_led1: led@4 {
+		reg = <4>;
+		function = LED_FUNCTION_BACKLIGHT;
+		function-enumerator = <2>;
+        };
+};
+
+
+backlight@40 {
Either needs 'reg' or the unit-address dropped.

+	leds = <&bkl_led0> , <&bkl_led1>;
drop the space            ^

  };
--
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux