Re: [PATCH v10 4/6] dts-bindings: leds: Document the naming requirement for LED properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 09, 2019 at 10:51:25AM +0200, Jean-Jacques Hiblot wrote:
> LED properties must be named "leds" in the same way that PWM, clocks or
> PHY properties are names respectively "pwms", "clocks" and "phys".
> 
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
> ---
>  .../devicetree/bindings/leds/common.txt       | 20 ++++++++++++++++---
>  1 file changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index 9fa6f9795d50..31b8c1f68d27 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -10,6 +10,9 @@ can influence the way of the LED device initialization, the LED components
>  have to be tightly coupled with the LED device binding. They are represented
>  by child nodes of the parent LED device binding.
>  
> +LED properties should be named "leds". The exact meaning of each leds
> +property must be documented in the device tree binding for each device.
> +

This is worded oddly. The property is 'leds' and it is always a list of 
phandles to LED device nodes. It is present in an LED consumer device.

>  
>  Optional properties for child nodes:
>  - led-sources : List of device current outputs the LED is connected to. The
> @@ -165,9 +168,20 @@ led-controller@30 {
>  		function-enumerator = <2>;
>          };
>  
> -        led@3 {
> +        bkl_led0: led@3 {
>  		reg = <3>;
> -		function = LED_FUNCTION_INDICATOR;
> -		function-enumerator = <3>;
> +		function = LED_FUNCTION_BACKLIGHT;
> +		function-enumerator = <1>;
>          };
> +
> +        bkl_led1: led@4 {
> +		reg = <4>;
> +		function = LED_FUNCTION_BACKLIGHT;
> +		function-enumerator = <2>;
> +        };
> +};
> +
> +
> +backlight@40 {

Either needs 'reg' or the unit-address dropped.

> +	leds = <&bkl_led0> , <&bkl_led1>;

drop the space            ^

>  };
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux