Add a documentation of LED Multicolor LED class specific sysfs attributes. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- .../ABI/testing/sysfs-class-led-multicolor | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor new file mode 100644 index 000000000000..39fc73becfec --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -0,0 +1,43 @@ +What: /sys/class/leds/<led>/brightness +Date: Sept 2019 +KernelVersion: 5.5 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read/write + Writing to this file will update all LEDs within the group to a + calculated percentage of what each color LED intensity is set + to. The percentage is calculated via the equation below: + + led_brightness = requested_value * led_color_intensity/led_color_max_intensity + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value of the color is from 0 to + /sys/class/leds/<led>/max_brightness. + +What: /sys/class/leds/<led>/colors/<led_color>_intensity +Date: Sept 2019 +KernelVersion: 5.5 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read/write + The led_color directory is dynamically created based on the + colors defined by the registrar of the class. + The value for the led_color is defined in the + include/dt-bindings/leds/common.h. There is one directory per + color presented. The intensity file is created under each + led_color directory and controls the individual LED color + setting. + + The value of the color is from 0 to + /sys/class/leds/<led>/colors/<led_color>_max_intensity. + +What: /sys/class/leds/<led>/colors/<led_color>_max_intensity +Date: Sept 2019 +KernelVersion: 5.5 +Contact: Dan Murphy <dmurphy@xxxxxx> +Description: read only + Maximum intensity level for the LED color, default is + 255 (LED_FULL). + + If the LED does not support different intensity levels, this + should be 1. -- 2.22.0.214.g8dca754b1e