Add the intensity function call back to support the multicolor framework. This function allows setting a specific brightness on a specific channel. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- drivers/leds/leds-lp5523.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index d0b931a136b9..5d6002e4d657 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -791,6 +791,25 @@ static ssize_t store_master_fader_leds(struct device *dev, return ret; } +static int lp5523_led_intensity(struct lp55xx_led *led) +{ + struct lp55xx_chip *chip = led->chip; + int ret; + int i; + + mutex_lock(&chip->lock); + for (i = 0; i < led->mc_cdev.num_leds; i++) { + ret = lp55xx_write(chip, + LP5523_REG_LED_PWM_BASE + + led->color_component[i].output_num, + led->color_component[i].brightness); + if (ret) + break; + } + mutex_unlock(&chip->lock); + return ret; +} + static int lp5523_led_brightness(struct lp55xx_led *led) { struct lp55xx_chip *chip = led->chip; @@ -857,6 +876,7 @@ static struct lp55xx_device_config lp5523_cfg = { .max_channel = LP5523_MAX_LEDS, .post_init_device = lp5523_post_init_device, .brightness_fn = lp5523_led_brightness, + .color_intensity_fn = lp5523_led_intensity, .set_led_current = lp5523_set_led_current, .firmware_cb = lp5523_firmware_loaded, .run_engine = lp5523_run_engine, -- 2.22.0.214.g8dca754b1e