Add the reg property to each channel node. This update is
to accomodate the multicolor framework. In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
CC: Shawn Guo <shawnguo@xxxxxxxxxx>
CC: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
CC: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
CC: Fabio Estevam <festevam@xxxxxxxxx>
CC: NXP Linux Team <linux-imx@xxxxxxx>
---
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800fec637..efc466ed1fea 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -257,29 +257,35 @@
reg = <0x30>;
clock-mode = /bits/ 8 <1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
- chan0 {
+ chan@0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <0>;
};
- chan1 {
+ chan@1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <1>;
};
- chan2 {
+ chan@2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
+ reg = <2>;
};
- chan3 {
+ chan@3 {
chan-name = "W";
led-cur = /bits/ 8 <0x0>;
max-cur = /bits/ 8 <0x0>;
+ reg = <3>;
};
};
--
2.22.0.214.g8dca754b1e
