Add the multicolor brightness call back to support the multicolor framework. This function allows setting the brightness across grouped LED channels in a single call. Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- drivers/leds/leds-lp5521.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 6f0272249dc8..5785bc04b874 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -349,6 +349,25 @@ static int lp5521_run_selftest(struct lp55xx_chip *chip, char *buf) return 0; } +static int lp5521_multicolor_brightness(struct lp55xx_led *led) +{ + struct lp55xx_chip *chip = led->chip; + int ret; + int i; + + mutex_lock(&chip->lock); + for (i = 0; i < led->mc_cdev.num_leds; i++) { + ret = lp55xx_write(chip, + LP5521_REG_LED_PWM_BASE + + led->color_component[i].output_num, + led->color_component[i].brightness); + if (ret) + break; + } + mutex_unlock(&chip->lock); + return ret; +} + static int lp5521_led_brightness(struct lp55xx_led *led) { struct lp55xx_chip *chip = led->chip; @@ -490,6 +509,7 @@ static struct lp55xx_device_config lp5521_cfg = { .max_channel = LP5521_MAX_LEDS, .post_init_device = lp5521_post_init_device, .brightness_fn = lp5521_led_brightness, + .multicolor_brightness_fn = lp5521_multicolor_brightness, .set_led_current = lp5521_set_led_current, .firmware_cb = lp5521_firmware_loaded, .run_engine = lp5521_run_engine, -- 2.22.0.214.g8dca754b1e