[PATCH v7 1/9] leds: multicolor: Add sysfs interface definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a documentation of LED Multicolor LED class specific
sysfs attributes.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
 .../ABI/testing/sysfs-class-led-multicolor    | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor

diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor
new file mode 100644
index 000000000000..39fc73becfec
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-led-multicolor
@@ -0,0 +1,43 @@
+What:		/sys/class/leds/<led>/brightness
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@xxxxxx>
+Description:	read/write
+		Writing to this file will update all LEDs within the group to a
+		calculated percentage of what each color LED intensity is set
+		to. The percentage is calculated via the equation below:
+
+		led_brightness = requested_value * led_color_intensity/led_color_max_intensity
+
+		For additional details please refer to
+		Documentation/leds/leds-class-multicolor.rst.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/max_brightness.
+
+What:		/sys/class/leds/<led>/colors/<led_color>_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@xxxxxx>
+Description:	read/write
+		The led_color directory is dynamically created based on the
+		colors defined by the registrar of the class.
+		The value for the led_color is defined in the
+		include/dt-bindings/leds/common.h. There is one directory per
+		color presented.  The intensity file is created under each
+		led_color directory and controls the individual LED color
+		setting.
+
+		The value of the color is from 0 to
+		/sys/class/leds/<led>/colors/<led_color>_max_intensity.
+
+What:		/sys/class/leds/<led>/colors/<led_color>_max_intensity
+Date:		Sept 2019
+KernelVersion:	5.5
+Contact:	Dan Murphy <dmurphy@xxxxxx>
+Description:	read only
+		Maximum intensity level for the LED color, default is
+		255 (LED_FULL).
+
+		If the LED does not support different intensity levels, this
+		should be 1.
-- 
2.22.0.214.g8dca754b1e




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux