Re: [PATCH v8 2/9] documention: leds: Add multicolor class documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jacek

Thanks for the review

On 9/21/19 7:28 AM, Jacek Anaszewski wrote:
Dan,

On 9/20/19 7:41 PM, Dan Murphy wrote:
Add the support documentation on the multicolor LED framework.
This document defines the directores and file generated by the
Now there will be one directory created.

Apart from that - all documentation should go in the same patch
as the feature being added. So patches 1,2 and 3 should be melded
together.

I think only patches 1 & 2 should be squashed into a single patch.

Patch 3 are the dt-bindings which should be separated



multicolor framework.  It also documents usage.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
  Documentation/leds/index.rst                 |  1 +
  Documentation/leds/leds-class-multicolor.rst | 91 ++++++++++++++++++++
  2 files changed, 92 insertions(+)
  create mode 100644 Documentation/leds/leds-class-multicolor.rst

diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 060f4e485897..bc70c6aa7138 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -9,6 +9,7 @@ LEDs
leds-class
     leds-class-flash
+   leds-class-multicolor
     ledtrig-oneshot
     ledtrig-transient
     ledtrig-usbport
diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst
new file mode 100644
index 000000000000..063c9a411a1d
--- /dev/null
+++ b/Documentation/leds/leds-class-multicolor.rst
@@ -0,0 +1,91 @@
+====================================
+Multi Color LED handling under Linux
+====================================
+
+Description
+===========
+There are varying monochrome LED colors available for application.  These
+LEDs can be used as a single use case LED or can be mixed with other color
+LEDs to produce the full spectrum of color.
I'd say it won't be the most frequent use case. We can expect rather
compound RGB, RGBA[UV] etc. LED elements being connected to iouts of
multi color LED controllers like LP50xx. TI mentions RGB LEDs in its
application notes for instance. I'd mention that in the first place
and leave what you have above as another use case.

Which application notes are you referring to?


Color LEDs that are grouped
+can be presented under a single LED node with individual color control.
Let's skip "with individual color control". This is rather a means for
keeping backward compatibility. Main goal of the MC class is multi color
control. We can elaborate on how individual control can be achieved,
namely one needs to set brightness to max and then can use
the whole 0-<color>_max_intensity intensity scale for given iout.
But his can be implied from the information provided below.

Ack


+The multicolor class groups these LEDs and allows dynamically setting the value
What does "dynamically" stand for here? I assume you thought of altering
colors without changing global brightness, but now it is not the case.

I updated this from what you said below


+of a single LED or setting the intensity values of the LEDs in the group and
+updating the LEDs virtually simultaneously.
I propose below instead of the above three lines:

The multi color class groups these LEDs and allows controlling two
aspects of the final combined color: hue and lightness. The former is
controlled via <color>_intensity files and the latter is controlled
via brightness file.

For more details on hue and lightness notions please refer to
https://en.wikipedia.org/wiki/CIECAM02.

Note that intensity files only cache the written value and the actual
change of hardware state occurs upon writing brightness file. This
allows for changing many factors of the perceived color in a virtually
unnoticeable way for the human observer.

Ack


+Multicolor Class Control
+========================
+The multicolor class presents the LED groups under a directory called "colors".
+This directory is a child under the LED parent node created by the led_class
+framework.  The led_class framework is documented in led-class.rst within this
+documentation directory.
+
+Each colored LED will have two files created under the colors directory
+<led_color>_intensity and <led_color>_max_intensity. These files will contain
s/led_color/color/
Ack

+one of LED_COLOR_ID_* definitions from the header
+include/dt-bindings/leds/common.h.
+
+Directory Layout Example
+========================
+root:/sys/class/leds/rgb:grouped_leds# ls -lR colors/
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 red_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 red_intensity
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 green_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 green_intensity
+-rw-rwxr-- 1 root root 4096 Jul 7 03:10 blue_max_intensity
+--w--wx-w- 1 root root 4096 Jul 7 03:10 blue_intensity
+
+Multicolor Class Brightness Control
+===================================
+The multiclor class framework will calculate each monochrome LEDs intensity.
+
+The brightness level for each LED is calculated based on the color LED
+intensity setting divided by the color LED max intensity setting multiplied by
+the requested value.
s/value/brightness/

Ack


+
+led_brightness = requested_value * led_color_intensity/led_color_max_intensity
led_brightness = brightness * <color>_intensity/<color>_max_intensity

Ack


+
+Example:
+Three LEDs are present in the group as defined in "Directory Layout Example"
+within this document.
+
+A user first writes the color LED brightness file with the brightness level that
+is necessary to achieve a blueish violet output from the RGB LED group.
+
+echo 138 > /sys/class/leds/rgb:grouped_leds/red_intensity
+echo 43 > /sys/class/leds/rgb:grouped_leds/green_intensity
+echo 226 > /sys/class/leds/rgb:grouped_leds/blue_intensity
+
+red -
+	intensity = 138
+	max_intensity = 255
+green -
+	intensity = 43
+	max_intensity = 255
+blue -
+	intensity = 226
+	max_intensity = 255
+
+The user can control the brightness of that RGB group by writing the parent
+'brightness' control.  Assuming a parent max_brightness of 255 the user may want
+to dim the LED color group to half.  The user would write a value of 128 to the
+parent brightness file then the values written to each LED will be adjusted
+base on this value
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+adjusted_red_value = 128 * 138/255 = 69
+adjusted_green_value = 128 * 43/255 = 21
+adjusted_blue_value = 128 * 226/255 = 113
+
+Reading the parent brightness file will return the current brightness value of
+the color LED group.
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
+255
+
+echo 128 > /sys/class/leds/rgb:grouped_leds/brightness
+
+cat /sys/class/leds/rgb:grouped_leds/max_brightness
s/max_brightness/brightness/

Ack

Dan

+128




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux