Linux IIO Development
[Prev Page][Next Page]
- RE: [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: David Laight <David.Laight@xxxxxxxxxx>
- Re: [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- [PATCH v11 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v11 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v11 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v11 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- RE: [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: David Laight <David.Laight@xxxxxxxxxx>
- [PATCH v10 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v10 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v9 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v10 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v10 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v9 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH v7 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v9 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v9 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v9 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v9 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v7 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH v7 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH v7 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH v8 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v8 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v8 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v8 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v7 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v7 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v7 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v7 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH] iio: add kernel-doc '@owner'
- From: "Tobin C. Harding" <me@xxxxxxxx>
- [PATCH] iio: fix SPHINX kernel-docs build warning
- From: "Tobin C. Harding" <me@xxxxxxxx>
- Re: [rtc-linux] Re: [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/2] mfd: cros_ec: Introduce RTC commands and events definitions.
- From: Brian Norris <briannorris@xxxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- Re: [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH v6 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v6 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v6 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v6 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v4] iio: adc: ina2xx: Make calibration register value fixed
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v4] iio: adc: ina2xx: Make calibration register value fixed
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- Re: [PATCH v5 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v3] iio: adc: ina2xx: Make calibration register value fixed
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH 2/2] Drivers:iio:adc : fix quoted string split across lines issue in at91_adc.c
- From: venkat.prashanth2498@xxxxxxxxx
- Re: [PATCH v9 13/13] ASoC: stm32: add DFSDM DAI support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v9 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: adc: ina2xx: Make calibration register value fixed
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] Drivers: iio:adc: fix brace coding style issue in at91_adc.c
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] iio: hx711: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: hx711: fix bug in reset functionality
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 3/3] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 5/7] iio: adc: ina2xx: Use a monotonic clock for delay calculation
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 4/7] iio: adc: ina2xx: Do not udelay for several seconds
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 2/7] iio: adc: ina2xx: Clarify size requirement for data buffer
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/7] iio: adc: ina2xx: Remove bogus cast for data argument
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] Drivers: iio:adc: fix brace coding style issue in at91_adc.c
- From: venkat.prashanth2498@xxxxxxxxx
- Re: [PATCH v4 2/2] rtc: cros-ec: add cros-ec-rtc driver.
- From: Brian Norris <briannorris@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] rtc: cros-ec: add cros-ec-rtc driver.
- From: Brian Norris <briannorris@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] mfd: cros_ec: Introduce RTC commands and events definitions.
- From: Brian Norris <briannorris@xxxxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: Add Infineon TLV493D-A1B6
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3] iio: adc: ina2xx: Make calibration register value fixed
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- [PATCH v4 11/11] counter: 104-quad-8: Add Quadrature Counter interface support
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 10/11] docs: Add Quadrature Counter interface documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 09/11] counter: Documentation: Add Quadrature Counter sysfs documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 05/11] counter: Documentation: Add Simple Counter sysfs documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 06/11] docs: Add Simple Counter interface documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 08/11] counter: Introduce the Quadrature Counter interface
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 07/11] counter: Add dummy counter driver
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 04/11] counter: Introduce the Simple Counter interface
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 03/11] docs: Add Generic Counter interface documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 02/11] counter: Documentation: Add Generic Counter sysfs documentation
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 01/11] iio: Introduce the Generic Counter interface
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v4 00/11] Introduce the Counter subsystem
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- [PATCH v9 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 01/13] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 02/13] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 00/13] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 11/13] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 08/13] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 04/13] IIO: inkern: API for manipulating channel attributes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 06/13] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v9 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 2/2] iio: hx711: fix bug in reset functionality
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 1/2] iio: hx711: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 0/2] iio: hx711: add buffered trigger support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v5 3/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v5 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v5 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v5 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v8 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [rtc-linux] Re: [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio/bmp280-core.c: Read calibration data in probe
- From: Stefan Tatschner <stefan.tatschner@xxxxxxxxx>
- [PATCH v2] iio/bmp280-core.c: Read calibration data in probe
- From: Stefan Tatschner <stefan.tatschner@xxxxxxxxx>
- Re: [PATCH v8 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 5/7] iio: adc: ina2xx: Use a monotonic clock for delay calculation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 0/7] iio: adc: ina2xx: Rework CNVR alignment, fix busy loops
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/8] power: supply: axp20x_battery: add support for AXP813
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 3/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH] iio/bmp280-core.c: Read calibration data in probe
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Andreas Färber <afaerber@xxxxxxx>
- Re: [rtc-linux] Re: [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH 2/8] iio: adc: axp20x_adc: add support for AXP813 ADC
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH] iio/bmp280-core.c: Read calibration data in probe
- From: Stefan Tatschner <stefan.tatschner@xxxxxxxxx>
- [PATCH v8 08/13] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 00/13] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 02/13] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 04/13] IIO: inkern: API for manipulating channel attributes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 01/13] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 11/13] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 06/13] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v8 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 2/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v4 3/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v4 1/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v4 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [PATCH 5/8] power: supply: axp20x_battery: add support for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/8] iio: adc: axp20x_adc: add support for AXP813 ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: Handle enumerated properties with gaps
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] meson_saradc fixes and minor improvements
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels
- From: Matt Ranostay <mranostay@xxxxxxxxx>
- Re: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH v1 5/7] iio: adc: ina2xx: Use a monotonic clock for delay calculation
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH v1 0/7] iio: adc: ina2xx: Rework CNVR alignment, fix busy loops
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] meson_saradc fixes and minor improvements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] iio: adc: meson-saradc: program the channel muxes during initialization
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/5] iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8b
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: iio/…: Use common error handling code
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/3] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: ABI: Fix name of timestamp sysfs file
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 06/45] drivers: iio: gyro: remove duplicate includes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: stm32: Adopt SPDX identifier
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- Re: [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- Re: [PATCH] iio: dac: mcp4725: Remove unneeded conversions to bool
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/2] iio: hx711: fix bug in reset functionality
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: hx711: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/2] iio: hx711: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 13/13] ASoC: stm32: add DFSDM DAI support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v7 04/13] IIO: inkern: API for manipulating channel attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/5] meson_saradc fixes and minor improvements
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 0/7] iio: adc: ina2xx: Rework CNVR alignment, fix busy loops
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 5/7] iio: adc: ina2xx: Use a monotonic clock for delay calculation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Handle enumerated properties with gaps
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Andreas Färber <afaerber@xxxxxxx>
- Re: [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/8] power: supply: axp20x_battery: add support for AXP813
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/8] dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: iio/…: Use common error handling code
- From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [linux-sunxi] [PATCH 1/8] iio: adc: axp20x_adc: put ADC rate setting in a per-variant function
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/8] iio: adc: axp20x_adc: add support for AXP813 ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH][next] iio: light: make a couple of config structures static
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: buffer: Expose data available
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: iio/…: Use common error handling code
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: common: ssp_sensors: use ktime_get_real_ns() timestamps
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: dummy_evgen: modify the return value check for irq_sim_init()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: iio/…: Use common error handling code
- From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- [PATCH 2/2] iio: magnetometer: Add Infineon TLV493D-A1B6
- From: Andreas Färber <afaerber@xxxxxxx>
- [PATCH 1/2] dt-bindings: Add Infineon TLV493D-A1B6
- From: Andreas Färber <afaerber@xxxxxxx>
- [PATCH 0/2] iio: magnetometer: Infineon TLV493D-A1B6 support
- From: Andreas Färber <afaerber@xxxxxxx>
- [PATCH v1 7/7] iio: adc: ina2xx: Actually align the loop with the conversion ready flag
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 3/7] iio: adc: ina2xx: Remove unneeded dummy read to clear CNVR flag
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 5/7] iio: adc: ina2xx: Use a monotonic clock for delay calculation
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 1/7] iio: adc: ina2xx: Remove bogus cast for data argument
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 0/7] iio: adc: ina2xx: Rework CNVR alignment, fix busy loops
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 2/7] iio: adc: ina2xx: Clarify size requirement for data buffer
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 6/7] iio: adc: ina2xx: Align timestamp with conversion ready flag
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v1 4/7] iio: adc: ina2xx: Do not udelay for several seconds
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- [PATCH v7 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 06/13] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 02/13] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 08/13] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 11/13] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 01/13] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 04/13] IIO: inkern: API for manipulating channel attributes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v7 00/13] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH v2] iio: adc: ina2xx: Make calibration register value fixed
- From: Brüns, Stefan <Stefan.Bruens@xxxxxxxxxxxxxx>
- [PATCH v2] iio: adc: ina2xx: Make calibration register value fixed
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- Re: [PATCH] iio: stm32: Adopt SPDX identifier
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- [PATCH] iio: Handle enumerated properties with gaps
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/8] dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3] iio: buffer: Expose data available
- [PATCH v2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jeremy Cline <jeremy@xxxxxxxxxx>
- [PATCH] iio: chemical: ccs811: Fix output of IIO_CONCENTRATION channels
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- Re: [PATCH v3 2/4] ARM: dts: at91: sama5d2: added dma property for ADC device
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- Re: [PATCH] iio: stm32: Adopt SPDX identifier
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [PATCH v2] iio: buffer: Expose data available
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH v3 3/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v3 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v3 1/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v3 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v3 2/2] iio: hx711: fix bug in reset functionality
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 1/2] iio: hx711: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 0/2] iio: hx711: add buffered trigger support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2] iio: buffer: Expose data available
- [PATCH] iio: dac: mcp4725: Remove unneeded conversions to bool
- From: "Andrew F. Davis" <afd@xxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Matthew Fornero <matthew.fornero@xxxxxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Matthew Fornero <matthew.fornero@xxxxxxxxx>
- Re: [PATCH 1/2] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH] iio: stm32: Adopt SPDX identifier
- From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: hx711: fix bug in reset functionality
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH] iio: ABI: Fix name of timestamp sysfs file
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [PATCH 6/8] mfd: axp20x: add battery power supply cell for AXP813
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH 06/45] drivers: iio: gyro: remove duplicate includes
- From: Pravin Shedge <pravin.shedge4linux@xxxxxxxxx>
- Re: [linux-sunxi] [PATCH 1/8] iio: adc: axp20x_adc: put ADC rate setting in a per-variant function
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v6 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jeremy Cline <jeremy@xxxxxxxxxx>
- Re: [PATCH v6 13/13] ASoC: stm32: add DFSDM DAI support
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2 3/3] lib: Add strongly typed 64bit int_sqrt
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v2 1/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH 1/3] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH v2 0/3] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH 2/8] iio: adc: axp20x_adc: add support for AXP813 ADC
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/8] iio: adc: axp20x_adc: put ADC rate setting in a per-variant function
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 8/8] ARM: dtsi: sun8i: a711: enable battery power supply subnode
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 7/8] ARM: dtsi: axp81x: add battery power supply subnode
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 6/8] mfd: axp20x: add battery power supply cell for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 5/8] power: supply: axp20x_battery: add support for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 4/8] dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 3/8] mfd: axp20x: probe axp20x_adc driver for AXP813
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/8] add support for AXP813 ADC and battery power supply
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- [PATCH][next] iio: light: make a couple of config structures static
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
- Re: [PATCH 0/2] iio: accel: bmc150: Check for a second i2c resource
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 0/2] iio: accel: bmc150: Check for a second i2c resource
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
- Re: [PATCH v6 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PULL] First set of new device support, features and cleanup for IIO in the 4.16 cycle.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] First set of IIO fixes in the 4.15 cycle.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PULL] First set of new device support, features and cleanup for IIO in the 4.16 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: dummy_evgen: modify the return value check for irq_sim_init()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PULL] First set of IIO fixes in the 4.15 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 13/13] ASoC: stm32: add DFSDM DAI support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 06/13] IIO: ADC: add sigma delta modulator support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 02/13] docs: driver-api: add iio hw consumer section
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 01/13] iio: Add hardware consumer buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6 04/13] IIO: inkern: API for manipulating channel attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: temperature: Adding support for MLX90632
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: add MODULE_LICENSE to qcom-vadc-common.c
- From: Daniel Axtens <dja@xxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Add macro to populate struct iio_map array
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: add MODULE_LICENSE to qcom-vadc-common.c
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: hx711: fix bug in reset functionality
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: hx711: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: kxsd9: add MODULE_LICENSE
- From: Daniel Axtens <dja@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: trigger: Fix platform_get_irq's error checking
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: adc: add MODULE_LICENSE to qcom-vadc-common.c
- From: Daniel Axtens <dja@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: kxsd9: add MODULE_LICENSE
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: buffer-dma: Expose data available
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: common: ssp_sensors: use ktime_get_real_ns() timestamps
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: dummy_evgen: modify the return value check for irq_sim_init()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/5] meson_saradc fixes and minor improvements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: stm32: fix adc/trigger link error
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] iio: buffer-dma: Expose data available
- Re: [alsa-devel] [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v6 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 11/13] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 08/13] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 01/13] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 06/13] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 04/13] IIO: inkern: API for manipulating channel attributes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 02/13] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 00/13] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v6 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [alsa-devel] [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [alsa-devel] [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [alsa-devel] [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] iio: accel: bmc150: Add OF device ID table
- From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] iio: accel: kxsd9: add MODULE_LICENSE
- From: Daniel Axtens <dja@xxxxxxxxxx>
- [PATCH v2 2/2] iio: hx711: fix bug in reset functionality
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 1/2] iio: hx711: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 0/2] iio: hx711: add buffered trigger support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] staging: irda: Handle return value of platform_get_irq
- From: arvindY <arvind.yadav.cs@xxxxxxxxx>
- Re: [PATCH 2/3] staging: irda: Handle return value of platform_get_irq
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] iio: trigger: Fix platform_get_irq's error checking
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 3/3] staging: irda: Remove unnecessary 'err' initialization.
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 2/3] staging: irda: Handle return value of platform_get_irq
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 0/3] Handle return value of platform_get_irq
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH 1/2] iio: accel: bmc150: Move struct definitions into the header
- From: Jeremy Cline <jeremy@xxxxxxxxxx>
- [PATCH 2/2] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
- From: Jeremy Cline <jeremy@xxxxxxxxxx>
- [PATCH 0/2] iio: accel: bmc150: Check for a second i2c resource
- From: Jeremy Cline <jeremy@xxxxxxxxxx>
- [PATCH 2/2] dt-bindings: iio: temperature: add MLX90632 device bindings
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH 1/2] iio: temperature: Adding support for MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- [PATCH 0/2] iio: temperataure: MLX90632
- From: Crt Mori <cmo@xxxxxxxxxxx>
- Re: [2/2] hwmon: (ina2xx) Make calibration register value fixed
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 2/4] ARM: dts: at91: sama5d2: added dma property for ADC device
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
- Re: [RFC] Periodic Output, Timestamped Input
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v5 06/13] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 11/13] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 02/13] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 05/13] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 00/13] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 03/13] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 10/13] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 13/13] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 09/13] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 08/13] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 12/13] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 01/13] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 07/13] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v5 04/13] IIO: inkern: API for manipulating channel attributes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
- [PATCH 0/2] iio: hx711: add buffered trigger support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 2/2] iio: hx711: fix bug in reset functionality
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 1/2] iio: hx711: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH 0/5] meson_saradc fixes and minor improvements
- From: Kevin Hilman <khilman@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: light: add support for UVIS25 sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] iio: common: ssp_sensors: use ktime_get_real_ns() timestamps
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH] iio: dummy_evgen: modify the return value check for irq_sim_init()
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH] iio: stm32: fix adc/trigger link error
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ina2xx: Make calibration register value fixed
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: adc: ina2xx: Use LSB specifier instead of divider in config
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (ina2xx) Make calibration register value fixed
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (ina2xx) Make calibration register value fixed
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: chemical: sgpxx: triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: chemical: sgpxx: Support Sensirion SGPxx sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: remove redundant pointer pdata
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ina2xx: Make calibration register value fixed
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5 1/2] iio : Add cm3218 smbus ara and acpi support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] Linx 820 Windows tablet has a da280 mapped via ACPI
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] dt-bindings: iio: light: add UVIS25 device bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: light: add support for UVIS25 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Add macro to populate struct iio_map array
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: Add macro to populate struct iio_map array
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- Re: [PATCH] MAINTAINERS: Add missing IIO ABI entries
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: qcom-vadc: add missing MODULE_DESCRIPTION/LICENSE
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: kxsd9-i2c: add missing MODULE_AUTHOR/DESCRIPTION/LICENSE
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: light: isl76683 add way to adjust irq threshold
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 09/12] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: Add missing IIO ABI entries
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 12/13] iio: health: max30102: Add MAX30105 support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 11/13] iio: health: max30102: Prepare for copying varying number of measurements
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 10/13] iio: health: max30102: Move mode setting to buffer_postenable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 09/13] iio: health: max30102: Introduce indices for LED channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 08/13] iio: health: max30102: Add power enable parameter to get_temp function
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 07/13] iio: health: max30102: Introduce intensity channel macro
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/13] iio: health: max30102: Add check for part ID
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/13] iio: health: max30102: Temperature should be in milli Celsius
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 05/13] iio: health: max30102: Check retval of powermode function
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/13] iio: health: max30102: Fix mode config values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/13] iio: health: max30102: Fix missing newline in dev_err
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/13] iio: health: max30102: Remove inconsistent full stop in error message
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] MAINTAINERS: Add missing IIO ABI entries
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH] iio: Add macro to populate struct iio_map array
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v4 09/12] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH v4 08/12] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH v4 03/12] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v2 2/2] dt-bindings: iio: light: add UVIS25 device bindings
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 1/2] iio: light: add support for UVIS25 sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 0/2] Add support for UVIS25 uv sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH] Linx 820 Windows tablet has a da280 mapped via ACPI
- From: Luke Ross <luke@xxxxxxxxxxxxx>
- Re: [PATCH v5 2/2] iio : cm32181 : cosmetic cleanup
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- [PATCH v5 2/2] iio : cm32181 : cosmetic cleanup
- From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
- [PATCH v5 1/2] iio : Add cm3218 smbus ara and acpi support
- From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
- [PATCH 0/2] Make calibration register value fixed for ina2xx drivers
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- [PATCH 1/2] iio: adc: ina2xx: Make calibration register value fixed
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- [PATCH 2/2] hwmon: (ina2xx) Make calibration register value fixed
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- hid-sensor-hub stopped working *again*
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- [PATCH] iio: accel: remove redundant pointer pdata
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: chemical: sgpxx: Support Sensirion SGPxx sensors
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 2/2] iio: chemical: sgpxx: triggered buffer support
- From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
- [PATCH 1/2] iio: chemical: sgpxx: Support Sensirion SGPxx sensors
- From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
- [PATCH 0/2] iio: chemical: sgpxx: Support SGP30 / SGPC3 Gas Sensors
- From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: light: isl76683 add way to adjust irq threshold
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] iio: adc: qcom-vadc: add missing MODULE_DESCRIPTION/LICENSE
- From: Jesse Chan <jc@xxxxxxxxx>
- [PATCH] iio: accel: kxsd9-i2c: add missing MODULE_AUTHOR/DESCRIPTION/LICENSE
- From: Jesse Chan <jc@xxxxxxxxx>
- Re: [RFC] iio: light: acpi-als: Enable the light sensor on the Zenbook UX430UQ
- From: Kiernan Hager <kah.listaddress@xxxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
- From: Joel Stanley <joel@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v2 01/13] iio: health: max30102: Temperature should be in milli Celsius
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 12/13] iio: health: max30102: Add MAX30105 support
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 10/13] iio: health: max30102: Move mode setting to buffer_postenable
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 11/13] iio: health: max30102: Prepare for copying varying number of measurements
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 04/13] iio: health: max30102: Fix mode config values
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 05/13] iio: health: max30102: Check retval of powermode function
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 09/13] iio: health: max30102: Introduce indices for LED channels
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 08/13] iio: health: max30102: Add power enable parameter to get_temp function
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 06/13] iio: health: max30102: Add check for part ID
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 07/13] iio: health: max30102: Introduce intensity channel macro
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 03/13] iio: health: max30102: Remove inconsistent full stop in error message
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [PATCH v2 02/13] iio: health: max30102: Fix missing newline in dev_err
- From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
- Re: [RFC] iio: light: acpi-als: Enable the light sensor on the Zenbook UX430UQ
- From: Marek Vasut <marex@xxxxxxx>
- Re: [RFC] iio: light: acpi-als: Enable the light sensor on the Zenbook UX430UQ
- From: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
- Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [RFC] iio: light: acpi-als: Enable the light sensor on the Zenbook UX430UQ
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: stm32: add support for differential channels
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: adc: ina2xx: Use LSB specifier instead of divider in config
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: adc: ina2xx: Shift bus voltage register to mask flag bits
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] iio: adc: stm32: remove const channel names definition
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: fix kernel-doc build errors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 13/15] iio: imu: inv_mpu6050: Remove duplicate NULL check
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/5] iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8b
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/5] iio: proximity: sx9500: Add another ACPI ID
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] iio: adc: meson-saradc: program the channel muxes during initialization
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/5] iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: ad7746: Improve unlocking of a mutex in ad7746_start_calib()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: ad7152: Improve unlocking of a mutex in ad7152_start_calib()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1] iio: magnetometer: ak8975: Remove wrong ACPI ID
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: accel: mma8452: Rename config structs for readability
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/2] iio: accel: mma8452: Rename a struct for code readibility
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] Documentation: iio: Fix typo
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: core: Mark expected switch fall-through
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 08/12] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 10/12] IIO: consumer: allow to set buffer sizes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 09/12] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 05/12] IIO: ADC: add sigma delta modulator support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc/accel: Fix up module licenses
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v4 07/12] IIO: ADC: add stm32 DFSDM core support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 03/12] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 01/12] iio: Add hardware consumer buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 02/12] docs: driver-api: add iio hw consumer section
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: cpcap: fix incorrect validation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/4] iio: adc: at91-sama5d2_adc: ack DRDY irq in direct mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: light: isl76683 add way to adjust irq threshold
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/3] iio: light: Add support for Intersil isl76683 sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: cros_ec: Remove unused variables
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc/accel: Fix up module licenses
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH] iio: cros_ec: Remove unused variables
- From: Paolo Cretaro <paolocretaro@xxxxxxxxx>
- [PATCH v2 3/3] iio: light: isl76683 add way to adjust irq threshold
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] iio: light: Add support for Intersil isl76683 sensor
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH v2 0/3] iio: Add Intersil isl76683 light sensor support
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: Philippe Ombredanne <pombredanne@xxxxxxxx>
- Re: [PATCH v3 3/4] iio: adc: at91-sama5d2_adc: add support for DMA
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc/accel: Fix up module licenses
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH v2] iio: mma8452: replace license description with SPDX specifier
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v4 11/12] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [RFC] iio: light: acpi-als: Enable the light sensor on the Zenbook UX430UQ
- From: Kiernan Hager <kah.listaddress@xxxxxxxxx>
- Re: [PATCH v4 11/12] ASoC: add bindings for stm32 DFSDM filter
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/4] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v3 1/4] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH v3 3/4] iio: adc: at91-sama5d2_adc: add support for DMA
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH v3 4/4] iio: adc: at91-sama5d2_adc: ack DRDY irq in direct mode
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH v3 2/4] ARM: dts: at91: sama5d2: added dma property for ADC device
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH v3 0/4] iio: adc: at91-sama5d2_adc: add DMA support
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: adc: cpcap: fix incorrect validation
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] iio: adc/accel: Fix up module licenses
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: iio/accel/kxsd9_i2c: no license, taints kernel
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: adc: cpcap: fix incorrect validation
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- [PATCH] iio: adc: cpcap: fix incorrect validation
- From: Pan Bian <bianpan2016@xxxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH v4 2/4] iio: adc: meson-saradc: remove irrelevant clock "sana"
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: iio/accel/kxsd9_i2c: no license, taints kernel
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- iio/accel/kxsd9_i2c: no license, taints kernel
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 6/9] i2c: smbus: use DMA safe buffers for emulated SMBus transactions
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 5/9] i2c: add i2c_master_{send|recv}_dmasafe
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 4/9] i2c: refactor i2c_master_{send_recv}
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: getting started w/ iio driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH v4 2/2] rtc: cros-ec: add cros-ec-rtc driver.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v4 1/2] mfd: cros_ec: Introduce RTC commands and events definitions.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- [PATCH v4 0/2] Add support for cros-ec-rtc driver.
- From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 3/4] dt-bindings: iio: adc: update the doc for SAR ADC
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 06/12] IIO: add DT bindings for stm32 DFSDM filter
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH v4 04/12] IIO: Add DT bindings for sigma delta adc modulator
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 08/12] IIO: ADC: add STM32 DFSDM sigma delta ADC support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 05/12] IIO: ADC: add sigma delta modulator support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 09/12] IIO: ADC: add stm32 DFSDM support for PDM microphone
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 12/12] ASoC: stm32: add DFSDM DAI support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 07/12] IIO: ADC: add stm32 DFSDM core support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 11/12] ASoC: add bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 10/12] IIO: consumer: allow to set buffer sizes
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 00/12] Add STM32 DFSDM support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 06/12] IIO: add DT bindings for stm32 DFSDM filter
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 01/12] iio: Add hardware consumer buffer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 03/12] IIO: hw_consumer: add devm_iio_hw_consumer_alloc
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- [PATCH v4 02/12] docs: driver-api: add iio hw consumer section
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH] iio: accel: mma8452: Add single pulse/tap event detection
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v2] iio: core: Mark expected switch fall-through
- From: "Gustavo A. R. Silva" <garsilva@xxxxxxxxxxxxxx>
- [PATCH] io: core: mark expected switch fall-through
- From: "Gustavo A. R. Silva" <garsilva@xxxxxxxxxxxxxx>
- Re: [PATCH] io: core: mark expected switch fall-through
- From: "Gustavo A. R. Silva" <garsilva@xxxxxxxxxxxxxx>
- Re: [PATCH] io: core: mark expected switch fall-through
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v1] iio: magnetometer: ak8975: Remove wrong ACPI ID
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- RE: bmi160 drivers
- From: David Frey <DFrey@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
- From: Maciej Purski <m.purski@xxxxxxxxxxx>
- Re: bmi160 drivers
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: light: add UVIS25 device bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH 3/3] iio: light: isl76683 add way to adjust irq threshold
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH 2/3] dt-bindings: iio: add Intersil isl76683 light sensor bindings
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH 1/3] iio: light: add support for Intersil isl76683 sensor
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH 0/3] iio: add Intersil isl76683 light sensor support
- From: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
- [PATCH v4 3/4] dt-bindings: iio: adc: update the doc for SAR ADC
- From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
- [PATCH v4 2/4] iio: adc: meson-saradc: remove irrelevant clock "sana"
- From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
- [PATCH v4 0/4] fix the clock setting for SAR ADC
- From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- bmi160 drivers
- From: David Frey <DFrey@xxxxxxxxxxxxxxxxxx>
- Re: [2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
- From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH] iio: mma8452: add power_mode sysfs configuration
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v1] iio: magnetometer: ak8975: Remove wrong ACPI ID
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/2] iio: accel: mma8452: Rename config structs for readability
- From: harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH v2 1/2] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v2 2/2] Documentation: iio: Fix typo
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH v2 0/2] ZOPT2210 ambient light and UVB sensor driver
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v4 1/2] iio: accel: mma8452: Rename a struct for code readibility
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v4 2/2] iio: accel: mma8452: Rename config structs for readability
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH v4 2/2] iio: accel: mma8452: Rename config structs for readability
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH v4 1/2] iio: accel: mma8452: Rename a struct for code readibility
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH v4 0/2] Refactor event related code
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v1] iio: magnetometer: ak8975: Remove wrong ACPI ID
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: getting started w/ iio driver
- From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
- Re: getting started w/ iio driver
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: getting started w/ iio driver
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 5/9] i2c: add i2c_master_{send|recv}_dmasafe
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 7/9] i2c: add docs to clarify DMA handling
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 1/9] i2c: add a message flag for DMA safe buffers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 6/9] i2c: smbus: use DMA safe buffers for emulated SMBus transactions
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 8/9] i2c: sh_mobile: use core helper to decide when to use DMA
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 9/9] i2c: rcar: skip DMA if buffer is not safe
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 4/9] i2c: refactor i2c_master_{send_recv}
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 3/9] i2c: dev: mark RDWR buffers as DMA_SAFE
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 2/9] i2c: add helpers to ease DMA handling
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: getting started w/ iio driver
- From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: proximity: sx9500: Set IRQ pin to direction-input if necessary
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: proximity: sx9500: Add GPIO ACPI mapping table
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: proximity: sx9500: Assign interrupt from GpioIo()
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- RE: getting started w/ iio driver
- From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]