Linux IIO Development

• Thread Index

• [PATCH v1] iio: proximity: sx9500: Fix typo in ACPI ID
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH 5/5] iio: adc: meson-saradc: program the channel muxes during initialization
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 4/5] iio: adc: meson-saradc: fix the clock frequency on Meson8 and Meson8b
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 3/5] iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 2/5] iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 1/5] iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH 0/5] meson_saradc fixes and minor improvements
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v1 13/15] iio: imu: inv_mpu6050: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: adc: aspeed: Deassert reset in probe
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• Re: [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2] iio: adc: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] iio: adc: aspeed: Deassert reset in probe
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• Re: [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Battery temperature
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] iio: adc: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH] iio: fix kernel-doc build errors
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: ina2xx: Fixes and extensions
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: adc: ina2xx: Shift bus voltage register to mask flag bits
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: ina2xx: Use LSB specifier instead of divider in config
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 03/13] iio: health: max30102: Remove inconsistent full stop in error message
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 02/13] iio: health: max30102: Fix missing newline in dev_err
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 01/13] iio: health: max30102: Temperature should be in milli Celsius
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 00/13] iio: health: Add MAX30105 support to max30102 driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 12/13] iio: health: max30102: Add MAX30105 support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 06/13] iio: health: max30102: Add check for part ID
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 07/13] iio: health: max30102: Introduce intensity channel macro
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 10/13] iio: health: max30102: Move mode setting to buffer_postenable
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 11/13] iio: health: max30102: Prepare for copying varying number of measurements
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 09/13] iio: health: max30102: Introduce indices for LED channels
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 05/13] iio: health: max30102: Check retval of powermode function
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 04/13] iio: health: max30102: Fix mode config values
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 08/13] iio: health: max30102: Add power enable parameter to get_temp function
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 12/13] iio: health: max30102: Add MAX30105 support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 13/13] dt-bindings: iio: health: Add MAX30105 support to max30102.txt
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 05/13] iio: health: max30102: Fix missing newline in dev_err
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 09/13] iio: health: max30102: Introduce indices for LED channels
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 07/13] iio: health: max30102: Introduce intensity channel macro
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 06/13] iio: health: max30102: Add check for part ID
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 05/13] iio: health: max30102: Check retval of powermode function
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 04/13] iio: health: max30102: Fix mode config values
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 04/13] iio: health: max30102: Remove inconsistent full stop in error message
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 03/13] iio: health: max30102: Check retval of powermode function
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 03/13] iio: health: max30102: Remove inconsistent full stop in error message
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 01/13] iio: health: max30102: Temperature should be in milli Celsius
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 01/13] iio: health: max30102: Fix mode config values
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 02/13] iio: health: max30102: Fix missing newline in dev_err
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 02/13] iio: health: max30102: Temperature should be in milli Celsius
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 00/13] iio: health: Add MAX30105 support to max30102 driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 10/13] iio: health: max30102: Move mode setting to buffer_postenable
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 08/13] iio: health: max30102: Add power enable parameter to get_temp function
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 11/13] iio: health: max30102: Prepare for copying varying number of measurements
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v4] iio : Add cm3218 smbus ara and acpi support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v4] iio : Add cm3218 smbus ara and acpi support
  • From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
• [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: add UVIS25 device bindings
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: add UVIS25 device bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v3] iio : Add cm3218 smbus ara and acpi support
  • From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
• Re: iio/light/gp2ap020a00f: Use common error handling code in gp2ap020a00f_adjust_lux_mode()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: iio/accel/stk8312: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: iio/accel/stk8312: Improve unlocking of a mutex in two functions
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: iio/accel/stk8312: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL] 3rd (small) set of new device support, features and cleanups for IIO in the 4.15 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio : Add cm3218 smbus ara and acpi support
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PULL] 3rd (small) set of new device support, features and cleanups for IIO in the 4.15 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: stm32: add support for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: stm32: remove const channel names definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/light/max44000: Use common error handling code in max44000_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio/accel/stk8ba50: Use common error handling code in stk8ba50_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio : Add cm3218 smbus ara and acpi support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/light/max44000: Use common error handling code in max44000_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: iio/pressure/hp206c: Use common error handling code in hp206c_conv_and_read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio/accel/stk8ba50: Use common error handling code in stk8ba50_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio/pressure/hp206c: Use common error handling code in hp206c_conv_and_read()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/light/gp2ap020a00f: Use common error handling code in gp2ap020a00f_adjust_lux_mode()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/light/max44000: Use common error handling code in max44000_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/pressure/hp206c: Use common error handling code in hp206c_conv_and_read()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/proximity/srf08: Improve unlocking of a mutex in srf08_read_ranging()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/pressure/mpl3115: Improve unlocking of a mutex in mpl3115_trigger_handler()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/accel/stk8312: Improve unlocking of a mutex in two functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio/proximity/srf08: Improve unlocking of a mutex in srf08_read_ranging()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/light/opt3001: Use common error handling code in opt3001_get_lux()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio/pressure/mpl3115: Improve unlocking of a mutex in mpl3115_trigger_handler()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/light/opt3001: Use common error handling code in opt3001_get_lux()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio/pressure/hp206c: Use common error handling code in hp206c_conv_and_read()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/light/opt3001: Use common error handling code in opt3001_get_lux()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH] iio/light/opt3001: Use common error handling code in opt3001_get_lux()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] HID: sensor: Use the correct type instead of a void pointer
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio/light/max44000: Use common error handling code in max44000_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio/light/gp2ap020a00f: Use common error handling code in gp2ap020a00f_adjust_lux_mode()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio/adc/palmas: Use common error handling code in palmas_gpadc_calibrate()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio/accel/stk8ba50: Improve unlocking of a mutex in stk8ba50_read_raw()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio/accel/stk8ba50: Use common error handling code in stk8ba50_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio/accel/stk8ba50: Fine-tuning for two function implementations
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] iio/accel/stk8312: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: light: add UVIS25 device bindings
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 1/2] iio: light: add support to UVIS25 sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 0/2] Add support to UVIS25 uv sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] iio : Add cm3218 smbus ara and acpi support
  • From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
• [PATCH] iio/accel/bmc150: Improve unlocking of a mutex in two functions
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: stm32: add support for differential channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/3] iio: adc: stm32: remove const channel names definition
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/3] iio: adc: stm32: Add support for differential channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 13/13] staging: iio: tsl2x7x: add goto for TSL2X7X_LUX_CALC_OVER_FLOW
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: stm32: add support for differential channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 2/3] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: dac: ti-dac082s085: Document new driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: dac: ti-dac082s085: Read chip spec from device table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: stm32: add support for differential channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32: remove const channel names definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: sun4i-gpadc: use of_device_get_match_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 13/13] staging: iio: tsl2x7x: add goto for TSL2X7X_LUX_CALC_OVER_FLOW
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 12/13] staging: iio: tsl2x7x: put function definitions on a single line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 11/13] staging: iio: tsl2x7x: fix alignment of break statements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 10/13] staging: iio: tsl2x7x: rename power defines to improve code readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/13] staging: iio: tsl2x7x: correct alignment of parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/13] staging: iio: tsl2x7x: correct alignment of parenthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/13] staging: iio: tsl2x7x: remove unnecessary parentheses
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/13] staging: iio: tsl2x7x: convert in_proximity0_calibscale_available to use IIO_CONST_ATTR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 05/13] staging: iio: tsl2x7x: changed #defines to be aligned on the same column
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/13] staging: iio: tsl2x7x: remove unnecessary struct iio_dev definition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 03/13] staging: iio: tsl2x7x: sort #includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/13] staging: iio: tsl2x7x: remove unused tsl2x7x_parse_result structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/13] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio : Add cm3218 smbus ara and acpi support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: make array ch_to_mux static, makes object code smaller
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: add check on clock rate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: add tim15 trigger
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: meter: Replace mlock with driver private lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH] iio: adc: sun4i-gpadc: use of_device_get_match_data
  • From: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 02/13] staging: iio: tsl2x7x: remove unused tsl2x7x_parse_result structure
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 03/13] staging: iio: tsl2x7x: sort #includes
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 04/13] staging: iio: tsl2x7x: remove unnecessary struct iio_dev definition
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 01/13] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 05/13] staging: iio: tsl2x7x: changed #defines to be aligned on the same column
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 06/13] staging: iio: tsl2x7x: convert in_proximity0_calibscale_available to use IIO_CONST_ATTR
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 07/13] staging: iio: tsl2x7x: remove unnecessary parentheses
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 08/13] staging: iio: tsl2x7x: correct alignment of parenthesis
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 09/13] staging: iio: tsl2x7x: correct alignment of parenthesis
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 12/13] staging: iio: tsl2x7x: put function definitions on a single line
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 11/13] staging: iio: tsl2x7x: fix alignment of break statements
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 13/13] staging: iio: tsl2x7x: add goto for TSL2X7X_LUX_CALC_OVER_FLOW
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 10/13] staging: iio: tsl2x7x: rename power defines to improve code readability
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 00/13] staging: iio: tsl2x7x: staging cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH] iio : Add cm3218 smbus ara and acpi support
  • From: Marc CAPDEVILLE <m.capdeville@xxxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] iio: adc: make array ch_to_mux static, makes object code smaller
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 12/15] RDMA/cma: make config_item_type const
  • From: Doug Ledford <dledford@xxxxxxxxxx>
• [PATCH] iio: adc: stm32: add check on clock rate
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: adc: stm32: add tim15 trigger
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 5/5] iio: adc: at91-sama5d2_adc: use max sample rate
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/3] iio: adc: stm32: Add support for differential channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/3] iio: adc: stm32: remove const channel names definition
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/3] dt-bindings: iio: adc: stm32: add support for diff channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 3/3] iio: adc: stm32: add support for differential channels
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 12/15] RDMA/cma: make config_item_type const
  • From: Leon Romanovsky <leon@xxxxxxxxxx>
• [PATCH v2 3/3] iio: dac: ti-dac082s085: Read chip spec from device table
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 2/3] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: dac: ti-dac082s085: Document new driver
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v2 0/3] Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 11/15] stm class: make config_item_type const
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/15] configfs: make ci_type field, some pointers and function arguments const
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/15] make structure field, function arguments and structures const
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/15] make structure field, function arguments and structures const
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH v2 08/15] nvmet: make config_item_type const
  • From: Sagi Grimberg <sagi@xxxxxxxxxxx>
• Re: [PATCH v2 00/15] make structure field, function arguments and structures const
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/15] usb: gadget: configfs: make config_item_type const
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2 09/15] ACPI: configfs: make config_item_type const
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 04/15] iio: make function argument and some structures const
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/15] PCI: endpoint: make config_item_type const
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v2 01/15] configfs: make ci_type field, some pointers and function arguments const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 00/15] make structure field, function arguments and structures const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 02/15] usb: gadget: make config_item_type structures const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 04/15] iio: make function argument and some structures const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 05/15] ocfs2/cluster: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 03/15] target: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 06/15] PCI: endpoint: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 07/15] usb: gadget: configfs: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 08/15] nvmet: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 09/15] ACPI: configfs: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 10/15] nullb: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 12/15] RDMA/cma: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 11/15] stm class: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 14/15] dlm: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 13/15] netconsole: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH v2 15/15] configfs: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: mt2712: Add auxadc device node.
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Fwd: [PATCH] Staging: iio: meter: Replace mlock with driver private lock
  • From: Georgiana Chelu <georgiana.chelu93@xxxxxxxxx>
• Re: [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] Second set of new device support, features and cleanup for IIO in the 4.15 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 4.14 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL] Second set of IIO fixes for the 4.14 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/5] iio: adc: at91-sama5d2_adc: use max sample rate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] iio: adc: at91-sama5d2_adc: add support for DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-trigger: Don't touch sensors unless user space requests
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
  • From: Stefan Bruens <stefan.bruens@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: health: Use binding name for max30102 in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: Fix max30100 I2C chip address in example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sw_device: make the function argument as const
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: make config_item_type const
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: Drop duplicate forward declaration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: proximity: Add rfd77402 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] Documentation: iio: Clarify meaning of IIO_DISTANCE channel type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: make config_item_type const
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: health: Use binding name for max30102 in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: health: Fix max30100 I2C chip address in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: max1363 driver not working with iio_generic_buffer tool
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: mt2712: Add auxadc device node.
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• max1363 driver not working with iio_generic_buffer tool
  • From: Dmitry Mastykin <mastichi@xxxxxxxxx>
• [PATCH v4 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v4 4/4] platform/chrome: Register cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v4 2/4] platform/chrome: cros_ec_lpc: Add support for Google Glimmer
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v4 1/4] platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v4 0/4] platform/chrome: Support for cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• Re: [PATCH] iio: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: hwmon: Add ti-max-expected-current-milliamp property to ina2xx
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• [PATCH v3 4/4] ARM: dts: Add ti-max-expected-current-milliamp properties for ina231 in Odroid XU3
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: hwmon: Add ti-max-expected-current-milliamp property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v3 2/4] hwmon: (ina2xx) Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v3 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v3 0/4] Make max expected current configurable for ina2xx drivers
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: Add ti-max-expected-current-microamp properties for ina231 in Odroid XU3
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: hwmon: Add ti-max-expected-current-microamp property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v2 2/4] hwmon: (ina2xx) Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v2 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v2 0/4] Make max expected current configurable for ina2xx drivers
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH] iio: make config_item_type const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] iio: sw_trigger: make the function argument as const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] iio: hid-sensor-trigger: Don't touch sensors unless user space requests
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH] iio: sw_device: make the function argument as const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: health: Fix max30100 I2C chip address in example
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: health: Use binding name for max30102 in example
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH v2 2/5] ARM: dts: at91: sama5d2: added dma property for ADC device
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 4/5] iio: adc: at91-sama5d2_adc: ack DRDY irq in direct mode
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 3/5] iio: adc: at91-sama5d2_adc: add support for DMA
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 5/5] iio: adc: at91-sama5d2_adc: use max sample rate
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• [PATCH v2 0/5] iio: adc: at91-sama5d2_adc: add DMA support
  • From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: magnetometer: st_magn: add SPI-3wire support to LIS3MDL
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: iio: accel: add LIS3DHH device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: accel: add support to LIS3DHH
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: common: st_sensors: check odr address value in st_sensors_set_odr()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: st_sensors: split open-drain parameters for irq1 and irq2
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: pressure: st_pressure: add SPI-3wire support to st_pressure framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: gyro: st_gyro: add SPI-3wire support to st_gyro framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: accel: add support to LIS2DW12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/5] iio: st_sensors: do not always write enable_axis register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: Drop duplicate forward declaration
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH] iio: light: Add driver for IDT ZOPT2201 ambient light and UVB sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 2/2] iio: proximity: Add rfd77402 driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 1/2] Documentation: iio: Clarify meaning of IIO_DISTANCE channel type
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: st_sensors: add register mask for status register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: Introduce the generic counter interface
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: Add dummy counter driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 2/6] iio: Introduce the generic counter interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/6] docs: Add IIO Generic Counter Interface documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: Implement counter channel specification and IIO_SIGNAL constant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: Documentation: Add IIO Generic Counter sysfs documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] iio: Introduce the generic counter interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/6] iio: 104-quad-8: Add IIO generic counter interface support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: Add dummy counter driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: dln2-adc: fix build error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ina2xx: Mask flag bits in bus voltage register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: adc: dln2-adc: fix build error
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• Re: [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: imu: st_lsm6dsx: convert max_fifo_size in FIFO sample size
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: rcar-gyroadc: Use of_device_get_match_data() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: rcar-gyroadc: Enable compile-testing on non-ARM
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: rcar-gyroadc: Cast pointer to uintptr_t to fix warning on 64-bit
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• Re: [PATCH v3 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: hwmon: Add max-expected-current property to ina2xx
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 4/6] docs: Add IIO Generic Counter Interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 6/6] iio: 104-quad-8: Add IIO generic counter interface support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 5/6] iio: Add dummy counter driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 2/6] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 3/6] iio: Documentation: Add IIO Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 1/6] iio: Implement counter channel specification and IIO_SIGNAL constant
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 0/6] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 2/4] platform/chrome: cros_ec_lpc: Add support for Google Glimmer
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v3 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v3 1/4] platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v3 4/4] platform/chrome: Register cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v3 0/4] platform/chrome: Support for cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: hwmon: Add max-expected-current property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: rcar-gyroadc: Use of_device_get_match_data() helper
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: rcar-gyroadc: Enable compile-testing on non-ARM
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: rcar-gyroadc: Cast pointer to uintptr_t to fix warning on 64-bit
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH 1/1] iio: inkern: add helper to enable a channel
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] iio:dac: Add DT binding documentation for ds4424
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 2/5] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 3/3] iio: adc: rcar-gyroadc: Use of_device_get_match_data() helper
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/3] iio: adc: rcar-gyroadc: Misc improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/3] iio: adc: rcar-gyroadc: Enable compile-testing on non-ARM
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/3] iio: adc: rcar-gyroadc: Cast pointer to uintptr_t to fix warning on 64-bit
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: Introduce the generic counter interface
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH v2 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 3/4] iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 2/4] iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 1/4] iio: imu: st_lsm6dsx: convert max_fifo_size in FIFO sample size
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH v2 0/4] rework st_lsm6dsx driver to support more devices
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 11/11] iio: adc: ti-ads1015: add threshold event support
  • From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
• Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] iio: adc: ina2xx: Mask flag bits in bus voltage register
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 3/3] iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 0/3] iio: adc: ina2xx: Fixes and extensions
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 1/4] iio: imu: st_lsm6dsx: convert max_fifo_size in fifo words
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] staging: iio: ade7753: expanding buffer lock to cover both buffer and state protection
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dummy: evgen: use irq_sim
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: imu: st_lsm6dsx: convert max_fifo_size in fifo words
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: hwmon: Add max-expected-current property to ina2xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dummy: events: Add missing break
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: tsl2x7x: migrate in_illuminance0_integration_time sysfs attribute to iio_chan_spec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: tsl2x7x: rename tsl2x7x_settings variable to settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: trigger: Move header file content to source file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] iio: light: vl6180: Correct ALS scale for non-default gain/integration time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] iio: light: vl6180: Avoid readback of integration time register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ade7759: fix signed extension bug on shift of a u8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] staging: iio: ade7753: expanding buffer lock to cover both buffer and state protection
  • From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
• Re: [PATCH v3 6/8] iio: accel: kxcjk1013: add support for KXTF9
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/8] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/8] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/8] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/8] iio: accel: kxcjk1003: refactor ODR setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: harinath Nampally <harinath922@xxxxxxxxx>
• Re: [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pm
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/11] iio: adc: ti-ads1015: add threshold event support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] iio: dac: ds4422/ds4424 dac driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio:dac: Add DT binding documentation for ds4424
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] staging: iio: tsl2x7x: migrate *_thresh_period sysfs attributes to iio_event_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 2/3] staging: iio: tsl2x7x: migrate in_illuminance0_integration_time sysfs attribute to iio_chan_spec
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 1/3] staging: iio: tsl2x7x: rename tsl2x7x_settings variable to settings
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 0/3] staging: iio: tsl2x7x: staging cleanups
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: accel: kxcjk1013: drop variation number from driver's name
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: accel: kxcjk1013: drop variation number from driver's name
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: dummy: evgen: use irq_sim
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/5] iio: Introduce the generic counter interface
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• [PATCH] iio: dummy: events: Add missing break
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] iio: dummy: evgen: use irq_sim
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [PATCH 2/4] hwmon: (ina2xx) Make max expected current configurable
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: Add max-expected-current properties for ina231 in Odroid XU3
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: hwmon: Add max-expected-current property to ina2xx
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH 2/4] hwmon: (ina2xx) Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH 1/4] iio: adc: ina2xx: Make max expected current configurable
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH 0/4] Make max expected current configurable for ina2xx drivers
  • From: Maciej Purski <m.purski@xxxxxxxxxxx>
• [PATCH v2] iio: dummy: evgen: use irq_sim
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] iio: dummy: evgen: use irq_sim
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] iio: dummy: evgen: use irq_sim
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 4/4] iio: imu: st_lsm6dsx: add FIFO ops data structure
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 3/4] iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 2/4] iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 1/4] iio: imu: st_lsm6dsx: convert max_fifo_size in fifo words
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 0/4] rework st_lsm6dsx driver to support more devices
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH] iio: dummy: evgen: use irq_sim
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: dummy: evgen: use irq_sim
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v2 4/4] platform/chrome: Register cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v2 0/4] platform/chrome: Support for cros_ec_accel_legacy driver
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v2 2/4] platform/chrome: cros_ec_lpc: Add support for Google Glimmer
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• [PATCH v2 1/4] platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
  • From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock
  • From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH v4] staging: iio: adc: ad7192: use driver private lock to protect hardware state changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH v3] staging: iio: adc: ad7192: use driver private lock to protect hardware changes
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH v3] staging: iio: adc: ad7192: use driver private lock to protect hardware changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• [PATCH] staging: iio: trigger: Move header file content to source file
  • From: Harsha Sharma <harshasharmaiitr@xxxxxxxxx>
• Re: [PATCH v2 0/2] staging: iio: adc: ad7192: use private driver lock to protect hardware changes
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] iio: dummy: evgen: use irq_sim
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/2] staging: iio: adc: ad7192: add lock to protect hardware state changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: adc: ad7192: Replace mlock with driver private lock
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• [PATCH v2 0/2] staging: iio: adc: ad7192: use private driver lock to protect hardware changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• Re: [Outreachy kernel] [PATCH 2/2] staging: iio: adc: ad7192: add lock to protect hardware state changes
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [Outreachy kernel] [PATCH 1/2] staging: iio: adc: ad7192: Replace mlock with driver private lock
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• [PATCH 2/2] staging: iio: adc: ad7192: add lock to protect hardware state changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• [PATCH 1/2] staging: iio: adc: ad7192: Replace mlock with driver private lock
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• [PATCH 0/2] staging: iio: adc: ad7192: use private driver lock to protect hardware changes
  • From: Aastha Gupta <aastha.gupta4104@xxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: sun4i-gpadc-iio: do not fail probing when no thermal DT node
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: sun4i-gpadc-iio: do not fail probing when no thermal DT node
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pm
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/5] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: zpa2326: Remove always-true check which confuses gcc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v7 1/2] iio: dac: ds4422/ds4424 dac driver
  • From: "Ismail H. Kose" <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: inv_mpu6050: fix error path not turning chip back off
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: as3935: noise detection + threshold changes
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] iio: 104-quad-8: Add IIO generic counter interface support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 4/5] docs: Add IIO Generic Counter Interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 3/5] iio: Documentation: Add IIO Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 2/5] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 1/5] iio: Implement counter channel specification and IIO_SIGNAL constant
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v2 0/5] iio: Introduce the generic counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio: stm32: fix adc/trigger link error
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] First set of new device support, features and cleanup for IIO in the 4.15 cycle.
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL] First set of new device support, features and cleanup for IIO in the 4.15 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH v3 3/3] iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH v3 2/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH v3 0/3] Refactor event related code
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• Re: [PATCH 0/3] Refactor event related code
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 0/3] Refactor event related code
  • From: harinath Nampally <harinath922@xxxxxxxxx>
• Re: [PATCH] iio: stm32: fix adc/trigger link error
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: accel: mma8452: Add single pulse/tap event detection feature for fxls8471.
  • From: harinath Nampally <harinath922@xxxxxxxxx>
• Re: [PATCH 0/3] Refactor event related code
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 2/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 3/3] iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 4/4] iio: accel: mma8452: Add single pulse/tap event detection feature for fxls8471.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 1/3] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 0/3] Refactor event related code
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• Re: [PATCH] iio: stm32: fix adc/trigger link error
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PULL] First set of IIO fixes for the 4.14 cycle.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/7] AXP803 AC/Battery support
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [RFC PATCH 1/7] dt-bindings: add compatibles for AXP803 Battery/USB power supplies
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/7] power: supply: axp20x-battery: support AXP803
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/7] iio: adc: axp20x-adc: add support for AXP803
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: remove LIR configuration
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [RFC PATCH 2/7] iio: adc: axp20x-adc: allow to skip ADC rate setup now
  • From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: accel: mma8452: Add single pulse/tap event detection feature for fxls8471.
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH 0/3] This patchset refactors event related functions
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• [PATCH 1/3] iio: accel: mma8452: Rename time step look up struct to generic name as the values are same for all the events.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 3/3] iio: accel: mma8452: Add single pulse/tap event detection feature for fxls8471.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 2/3] iio: accel: mma8452: Rename read/write event value callbacks to generic function name.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 0/3] This patchset refactors event related functions
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH v3 2/4] iio: light: vl6180: Avoid readback of integration time register
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v3 4/4] iio: light: vl6180: Correct ALS scale for non-default gain/integration time
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Currently, the vl6180 driver reports bogus in_illuminance_scale values
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH] iio: accel: mma8452: Rename structs holding event configuration registers to more appropriate names.
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PULL] First set of new device support, features and cleanup for IIO in the 4.15 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] First set of IIO fixes for the 4.14 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: st_lsm6dsx: remove rounding configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: remove LIR configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: mt2712: Add auxadc device node.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: mt2712: Add compatible node for mt2712.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: adc: mt2712: add binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/4] iio: light: vl6180: Several fixes and enhancements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: light: vl6180: Avoid readback of integration time register
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] platform/chrome: Add cros_ec_accel_legacy driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 8/8] iio: accel: kxcjk1013: drop variation number from driver's name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: accel: kxcjk1013: add support for KXTF9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Staging: iio: meter: ade7759: update locking method for write frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/2] iio: dac: ds4422/ds4424 dac driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/7] AXP803 AC/Battery support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 4/7] power: supply: axp20x-battery: support AXP803
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 3/7] iio: adc: axp20x-adc: add support for AXP803
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/6] ARM: sun8i: h3: add partial CPU thermal zone
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: mma8452: Fix code style warning for unsigned int declarations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: accel: mma8452: Fix code style warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix bad error check on max_channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: trigger: stm32-timer: enable clock when in master mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: trigger: stm32-timer: fix a corner case to write preset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: trigger: stm32-timer: preset shouldn't be buffered
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: light: vl6180: Avoid readback of integration time register
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] iio: light: vl6180: Correct ALS scale for non-default gain/integration time
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2 0/4] iio: light: vl6180: Several fixes and enhancements
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: accel: mma8452: Fix code style warning for unsigned int declarations
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 1/2] iio: accel: mma8452: Fix code style warning
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 0/2] This patchset is for fixes reported by checkpatch.pl
  • From: Harinath Nampally <harinath922@xxxxxxxxx>
• [PATCH 2/2] iio: imu: st_lsm6dsx: remove rounding configuration
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: remove LIR configuration
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 0/2] Remove unnecessary FIFO configurations
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• [PATCH 2/3] iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 3/3] iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH 0/3] iio: adc: twl4030: Fix some error handling issues in 'twl4030_madc_probe()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v6 2/2] iio:dac: Add DT binding documentation for ds4424
  • From: "Ismail H. Kose" <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/2] iio: dac: ds4422/ds4424 dac driver
  • From: "Ismail H. Kose" <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] iio: dac: ds4422/ds4424 dac driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v1 01/10] clk: at91: pmc: Wait for clocks when resuming
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH v5] iio: dac: ds4422/ds4424 dac driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v3 1/5] iio: st_sensors: add register mask for status register
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [RFC PATCH 0/7] AXP803 AC/Battery support
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [RFC PATCH 0/7] AXP803 AC/Battery support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [Outreachy kernel] Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
  • From: Julia Lawall <julia.lawall@xxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: accel: add support to LIS2DW12
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 3/5] iio: st_sensors: do not always write enable_axis register
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: st_sensors: add register mask for status register
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: adc: mt2712: add binding document
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH 2/3] iio: adc: mt2712: Add compatible node for mt2712.
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH 0/3] AUXADC: Mediatek auxadc driver for mt2712
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: mt2712: Add auxadc device node.
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: iio: accel: add LIS3DHH device bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 1/6] i2c: add a message flag for DMA safe buffers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 4/6] i2c: sh_mobile: use helper to decide if DMA is useful
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 5/6] i2c: rcar: skip DMA if buffer is not safe
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 0/6] i2c: document DMA handling and add helpers for it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [RFC PATCH 0/7] AXP803 AC/Battery support
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 7/7] arm64: allwinner: a64: enable AC and Battery for Pine64
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 6/7] arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 5/7] mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 4/7] power: supply: axp20x-battery: support AXP803
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 3/7] iio: adc: axp20x-adc: add support for AXP803
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 2/7] iio: adc: axp20x-adc: allow to skip ADC rate setup now
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• [RFC PATCH 1/7] dt-bindings: add compatibles for AXP803 Battery/USB power supplies
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Icenowy Zheng <icenowy@xxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: GPIO Configuration for IIO-HWMON Channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: GPIO Configuration for IIO-HWMON Channel
  • From: Patrick Venture <venture@xxxxxxxxxx>
• Re: [PATCH v3] iio: dac: ds4422/ds4424 dac driver
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: Replace bit shifting with BIT macro
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v5] iio: dac: ds4422/ds4424 dac driver
  • From: Ismail Kose <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: dac: ds4422/ds4424 dac driver
  • From: Ismail Kose <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3] iio: dac: ds4422/ds4424 dac driver
  • From: Ismail Kose <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH v3] iio: dac: ds4422/ds4424 dac driver
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH 1/4] iio: light: vl6180: Move range check to integration time setter, cleanup
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 0/4] iio: light: vl6180: Several fixes and enhancements
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 4/4] iio: light: vl6180: Correct ALS scale for non-default gain/integration time
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 3/4] iio: light: vl6180: Cleanup als_gain lookup, avoid register readback
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH 2/4] iio: light: vl6180: Avoid readback of integration time register
  • From: Stefan Brüns <stefan.bruens@xxxxxxxxxxxxxx>
• [PATCH v2] staging: iio: Replace bit shifting with BIT macro
  • From: Haneen Mohammed <hamohammed.sa@xxxxxxxxx>