On Mon, 23 Apr 2018 23:08:06 +0200
Peter Rosin <peda@xxxxxxxxxx> wrote:
> An ADC is often used to measure other quantities indirectly. This
> binding describe one cases, a current through a shunt resistor
> measured by the voltage over it.
>
> Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
One small whitespace issue inline that git am pointed out.
I fixed it.
Thanks,
Jonathan
> ---
> .../bindings/iio/afe/current-sense-shunt.txt | 41 ++++++++++++++++++++++
> MAINTAINERS | 6 ++++
> 2 files changed, 47 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
> new file mode 100644
> index 000000000000..4d842aa85040
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
> @@ -0,0 +1,41 @@
> +Current Sense Shunt
> +===================
> +
> +When an io-channel measures the voltage over a current sense shunt,
> +the interesting mesaurement is almost always the current through the
> +shunt, not the voltage over it. This binding describes such a current
> +sense circuit.
> +
> +Required properties:
> +- compatible : "current-sense-shunt"
> +- io-channels : Channel node of a voltage io-channel.
> +- shunt-resistor-micro-ohms : The shunt resistance in microohms.
> +
> +Example:
> +The system current is measured by measuring the voltage over a
> +3.3 ohms shunt resistor.
> +
> +sysi {
> + compatible = "current-sense-shunt";
> + io-channels = <&tiadc 0>;
> +
> + /* Divide the voltage by 3300000/1000000 (or 3.3) for the current. */
> + shunt-resistor-micro-ohms = <3300000>;
> +};
> +
> +&i2c {
> + tiadc: adc@48 {
> + compatible = "ti,ads1015";
> + reg = <0x48>;
The line above has some stray spaces - cleaned up.
> + #io-channel-cells = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 { /* IN0,IN1 differential */
> + reg = <0>;
> + ti,gain = <1>;
> + ti,datarate = <4>;
> + };
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 36a28e979e9a..0f7bec878919 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6889,6 +6889,12 @@ F: drivers/staging/iio/
> F: include/linux/iio/
> F: tools/iio/
>
> +IIO UNIT CONVERTER
> +M: Peter Rosin <peda@xxxxxxxxxx>
> +L: linux-iio@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt
> +
> IKANOS/ADI EAGLE ADSL USB DRIVER
> M: Matthieu Castet <castet.matthieu@xxxxxxx>
> M: Stanislaw Gruszka <stf_xl@xxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
