On 04/13/2018 12:31 AM, Peter Rosin wrote: > On 2018-04-12 17:35, Andrew F. Davis wrote: >> On 04/12/2018 09:29 AM, Peter Rosin wrote: >>> On 2018-04-11 18:13, Andrew F. Davis wrote: >>>> On 04/11/2018 10:51 AM, Lars-Peter Clausen wrote: >>>>> On 04/11/2018 05:43 PM, Andrew F. Davis wrote: >>>>>> On 04/11/2018 09:15 AM, Peter Rosin wrote: >>>>>>> This is a current sense amplifier from Analog Devices. >>>>>>> >>>>>>> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx> >>>>>>> --- >>>>>>> drivers/iio/afe/Kconfig | 3 +- >>>>>>> drivers/iio/afe/iio-unit-converter.c | 54 ++++++++++++++++++++++++++++++++++++ >>>>>>> 2 files changed, 56 insertions(+), 1 deletion(-) >>>>>>> >>>>>>> diff --git a/drivers/iio/afe/Kconfig b/drivers/iio/afe/Kconfig >>>>>>> index 642ce4eb12a6..0e10fe8f459a 100644 >>>>>>> --- a/drivers/iio/afe/Kconfig >>>>>>> +++ b/drivers/iio/afe/Kconfig >>>>>>> @@ -10,7 +10,8 @@ config IIO_UNIT_CONVERTER >>>>>>> depends on OF || COMPILE_TEST >>>>>>> help >>>>>>> Say yes here to build support for the IIO unit converter >>>>>>> - that handles voltage dividers and current sense shunts. >>>>>>> + that handles voltage dividers, current sense shunts and >>>>>>> + the LT6106 Current Sense Amplifier from Analog Devices. >>>>>> >>>>>> Could work better to split these out into separate drivers. Maybe a >>>>>> iio-shunt-resistor.c that does just voltage->current with the >>>>>> appropriate scaling. Then make a a separate lt6106.c. >>>>> >>>>> I don't think we need a separate driver here. There are tons of circuits >>>>> that all work the same way and all require the same properties. If we'd add >>>>> a driver for each of them we'd get buried in boilerplate code. >>>>> >>>> >>>> Fair enough, then it should at least be renamed to something generic >>>> like current-sense-amplifier, as you said lots of circuits do this, not >>>> just lt6106s. We will have then have support for: >>>> >>>> current-sense-amplifier >>>> current-sense-shunt >>>> voltage-divider >>> >>> For the compatible "current-sense-amplifier", I would advocate the >>> properties... >>> >>> sense-resistor-micro-ohms >>> sense-gain >>> >>> (or something close to that) >>> >>> ...and not input-resistor-ohms and output-resistor-ohms which are way >>> more particular to the LT6106. >>> >>> But as I said in the cover letter, I didn't go with sense-gain since I >>> thought I would end up with requests for non-integer gains. There is >>> yet to be a comment on the non-integer gain problem, and before there >>> is a path forward for that case, I'm reluctant. >>> >> >> Why not similar to what you had before with the resistor: >> >> sense-gain-multiplier >> sense-gain-divider >> >> if either are missing assume they are 1. > > Hmm, how about sense-gain for the normal integer case, and then divide > by sense-attenuation if needed? I.e. exactly the same functionality as > you describe, just different names. There is some precedence in the clock bindings for using -mult and -div as the suffix for fractional scales. See fixed-factor-clock.txt. -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
