Linux IIO Development
[Prev Page][Next Page]
- [PATCH] Staging: iio: meter: ade7759: update locking method for write frequency
- From: Katie Dunne <kdunne@xxxxxxxxxxxxx>
- [PATCH v3] iio: dac: ds4422/ds4424 dac driver
- From: Ismail Kose <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 4/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH] iio: imu: st_lsm6dsx: set sensor->odr value just in st_lsm6dsx_write_raw()
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH] iio: adc: stm32: fix bad error check on max_channels
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- [PATCH 2/4] platform/chrome: cros_ec_lpc: Add support for Google Glimmer
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH 1/4] platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH 4/4] platform/chrome: Register cros_ec_accel_legacy driver
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH 3/4] platform/chrome: Add cros_ec_accel_legacy driver
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH 0/4] platform/chrome: Support for cros_ec_accel_legacy driver
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH 2/3] iio: trigger: stm32-timer: fix a corner case to write preset
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 3/3] iio: trigger: stm32-timer: enable clock when in master mode
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 0/3] iio: trigger: stm32-timers fixes
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 1/3] iio: trigger: stm32-timer: preset shouldn't be buffered
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/6] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v4 6/6] ARM: sun8i: h3: add partial CPU thermal zone
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 5/6] ARM: sun8i: h3: add support for the thermal sensor in H3
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Icenowy Zheng <icenowy@xxxxxxx>
- Re: [PATCH v4 3/6] iio: adc: sun4i-gpadc-iio: rework code for supporting newer THS variants
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 2/6] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- [PATCH] staging: iio: ade7753: replace mlock with driver private lock
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH 4/4] dt-bindings: iio: accel: add LIS3DHH device bindings
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 3/4] iio: accel: add support to LIS3DHH
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 2/4] iio: common: st_sensors: check odr address value in st_sensors_set_odr()
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/4] iio: st_sensors: split open-drain parameters for irq1 and irq2
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/4] Add support to LIS3DHH accel sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 3/3] iio: pressure: st_pressure: add SPI-3wire support to st_pressure framework
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 2/3] iio: magnetometer: st_magn: add SPI-3wire support to LIS3MDL
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/3] iio: gyro: st_gyro: add SPI-3wire support to st_gyro framework
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/3] add SPI-3wire support to ST gyro/magn/pressure framework
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 8/8] iio: accel: kxcjk1013: drop variation number from driver's name
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 7/8] iio: accel: kxcjk1013: remove unused platform data struct
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 6/8] iio: accel: kxcjk1013: add support for KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 5/8] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 4/8] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 2/8] iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 3/8] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 1/8] iio: accel: kxcjk1003: refactor ODR setting
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v3 0/8] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- Re: [PATCH] staging: iio: ad7192: Use the dedicated reset function
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] staging: iio: ad7192: Use the dedicated reset function
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: cros_ec: Remove unused variable
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 6/6] ARM: sun8i: h3: add partial CPU thermal zone
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Paolo Cretaro <melko@xxxxxxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Paolo Cretaro <melko@xxxxxxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- Re: [PATCH v4 6/6] ARM: sun8i: h3: add partial CPU thermal zone
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH] iio: dac: ds4422/ds4424 dac driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH] iio: dac: ds4422/ds4424 dac driver
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: dac: ds4422/ds4424 dac driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: cros_ec: Remove unused variable
- From: Paolo Cretaro <paolocretaro@xxxxxxxxx>
- [PATCH] iio: dac: ds4422/ds4424 dac driver
- From: Ismail Kose <Ismail.Kose@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 01/10] clk: at91: pmc: Wait for clocks when resuming
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v4 0/6] IIO-based thermal sensor driver for Allwinner H3 SoC
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 3/6] iio: adc: sun4i-gpadc-iio: rework code for supporting newer THS variants
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 4/6] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 5/6] ARM: sun8i: h3: add support for the thermal sensor in H3
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 6/6] ARM: sun8i: h3: add partial CPU thermal zone
- From: Icenowy Zheng <icenowy@xxxxxxx>
- [PATCH v4 2/6] iio: adc: sun4i-gpadc-iio: rename A33-specified registers to contain A33
- From: Icenowy Zheng <icenowy@xxxxxxx>
- Re: [PATCH] staging: iio: ad7192: Use the dedicated reset function
- From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
- Re: [PATCH] staging: iio: ad7192: Use the dedicated reset function
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH] staging: iio: ad7192: Use the dedicated reset function
- From: Stefan Popa <stefan.popa@xxxxxxxxxx>
- Re: [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks
- From: romain izard <romain.izard@xxxxxxxxxxxxxxxxx>
- Re: [Outreachy kernel] Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH v2 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] staging: iio: ade7759: fix signed extension bug on shift of a u8
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: dln2-adc: initialize local struct before using it
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v1 01/10] clk: at91: pmc: Wait for clocks when resuming
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH v1 02/10] clk: at91: pmc: Save SCSR during suspend
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: Use __ATTR_NAMED to allow passing name as string to IIO_DEVICE_ATTR_NAMED and change usage to pass string
- From: himanshi <himshijain.hj@xxxxxxxxx>
- Re: [Outreachy kernel] [PATCH v2 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.
- From: Julia Lawall <julia.lawall@xxxxxxx>
- [PATCH v2 2/2] iio: Change to __ATTR_NAMED()
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH v2 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH v2 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- Re: [PATCH 2/2] iio: Use __ATTR_NAMED to allow passing name as string to IIO_DEVICE_ATTR_NAMED and change usage to pass string
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- [PATCH 2/2] iio: Use __ATTR_NAMED to allow passing name as string to IIO_DEVICE_ATTR_NAMED and change usage to pass string
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH 1/2] include: linux: sysfs: Add __ATTR_NAMED macro
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH 0/2] Rewrite the IIO_DEVICE_ATTR_NAMED API to pass name as string.
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: dac: ti-dac082s085: Document new driver
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: himanshi <himshijain.hj@xxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: himanshi <himshijain.hj@xxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: pressure: add LPS33HW and LPS35HW device bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [Outreachy kernel] [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH] iio: adc: dln2-adc: initialize local struct before using it
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH] iio: adc: dln2-adc: initialize local struct before using it
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH] Fixed IIO_DEVICE_ATTR_NAMED API to take name as a string and added "" around names
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- Re: [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 8/8] platform/chrome: cros_ec: sysfs: Modify error handling
- From: Benson Leung <bleung@xxxxxxxxxx>
- Re: [PATCH v2 7/8] platform/chrome: cros_ec: Add sysfs entry to set keyboard wake lid angle
- From: Benson Leung <bleung@xxxxxxxxxx>
- Re: [PATCH v1 10/10] tty/serial: atmel: Prevent a warning on suspend
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- Re: [PATCH v3 01/11] iio: Add hardware consumer support
- From: Arnaud Pouliquen <arnaud.pouliquen@xxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v6] iio: accel: mma8452: improvements to handle multiple events
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v6] iio: accel: mma8452: improvements to handle multiple events
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v2 4/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/6] iio: adc: mcp320x: Document struct mcp320x
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/6] iio: adc: mcp320x: Drop unnecessary of_device_id attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/6] iio: adc: mcp320x: Speed up readout of single-channel ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3] iio: chemical: ccs811: Add support for data ready trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: stm32: fix adc/trigger link error
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v6] iio: accel: mma8452: improvements to handle multiple events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: dln2-adc: initialize local struct before using it
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: core: Return error for failed read_reg
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: ad7793: Fix the serial interface reset
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: ad_sigma_delta: Implement a dedicated reset function
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: dac: ad5446: Add IDs of compatible Texas Instruments chips
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: iio: dac: ti-dac082s085: Document new driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] lmp92001: mfd: iio: dac: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: adc: dln2-adc: initialize local struct before using it
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v6] iio: accel: mma8452: improvements to handle multiple events
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH v6] iio: accel: mma8452: improvements to handle multiple events
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
- [PATCH v2 6/6 INFORMATIONAL/RFT] iio: adc: mcp320x: Support continuous conversion mode
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 5/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 4/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 3/6] iio: adc: mcp320x: Document struct mcp320x
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 2/6] iio: adc: mcp320x: Drop unnecessary of_device_id attributes
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 1/6] iio: adc: mcp320x: Speed up readout of single-channel ADCs
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH v2 0/6] IIO driver for MCP3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v1 07/10] iio:adc:at91-sama5d2: Support backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- Re: [PATCH v1 07/10] iio:adc:at91-sama5d2: Support backup mode
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
- [PATCH v1 02/10] clk: at91: pmc: Save SCSR during suspend
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 00/10] Various patches for SAMA5D2 backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 03/10] clk: at91: pmc: Support backup for programmable clocks
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 01/10] clk: at91: pmc: Wait for clocks when resuming
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 06/10] ehci-atmel: Power down during suspend is normal
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 05/10] mtd: nand: atmel: Report PMECC failures as errors
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 10/10] tty/serial: atmel: Prevent a warning on suspend
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 09/10] atmel_flexcom: Support backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 07/10] iio:adc:at91-sama5d2: Support backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 08/10] pwm: atmel-tcb: Support backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- [PATCH v1 04/10] mtd: nand: atmel: Avoid ECC errors when leaving backup mode
- From: Romain Izard <romain.izard.pro@xxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: walter harms <wharms@xxxxxx>
- Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
- [PATCH v2] staging: iio: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [Outreachy kernel] Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [Outreachy kernel] Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [Outreachy kernel] Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [Outreachy kernel] [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Julia Lawall <julia.lawall@xxxxxxx>
- [PATCH] Staging: iio: adc: Added Space around binary op.
- From: Himanshi Jain <himshijain.hj@xxxxxxxxx>
- [PATCH v3] iio: chemical: ccs811: Add support for data ready trigger
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH] iio: stm32: fix adc/trigger link error
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH] iio: stm32: fix adc/trigger link error
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] iio: core: Return error for failed read_reg
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH] iio: core: Return error for failed read_reg
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 1/2] iio: ad_sigma_delta: Implement a dedicated reset function
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: ad7793: Fix the serial interface reset
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH 2/2] iio: ad7793: Fix the serial interface reset
- From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
- [PATCH 1/2] iio: ad_sigma_delta: Implement a dedicated reset function
- From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Daniel Mack <daniel@xxxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Arnd Bergmann <arnd@xxxxxxxx>
- [PATCH 1/2] iio: dac: ad5446: Add IDs of compatible Texas Instruments chips
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 2/2] drivers: misc: ti_dac7512: Remove duplicate driver
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 2/2] iio: dac: Add Texas Instruments 8/10/12-bit 2/4-channel DAC driver
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 1/2] dt-bindings: iio: dac: ti-dac082s085: Document new driver
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH] iio:ad7793: Fix the serial interface reset
- From: "Bogdan, Dragos" <Dragos.Bogdan@xxxxxxxxxx>
- Re: [PATCH] iio:ad7793: Fix the serial interface reset
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH] iio:ad7793: Fix the serial interface reset
- From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
- [GIT PULL] Immutable branch between MFD, IIO and PWM due for the v4.14 merge window
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [RESEND PATCH v3 2/9] mfd: Add STM32 LPTimer driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Brian Masney <masneyb@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 0/3] iio: Introduce the generic counter interface
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: Introduce the generic counter interface
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] iio: chemical: ccs811: Add support for data ready trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: iio: pressure: add LPS33HW and LPS35HW device bindings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: pressure: add support to LPS33HW and LPS35HW
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 0/5] Add support to LIS2DW12 accel sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: ti-ads1015: fix comparator polarity setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: imu: inv_mpu6050: make arrays hz and d static
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: adc: ti-ads1015: add 10% to conversion wait time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ti-ads1015: write config register only on change
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ti-ads1015: write config register only on change
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: imu: inv_mpu6050: fix missing break in switch
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/6] iio: adc: mcp320x: Drop unnecessary of_device_id attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/6] iio: adc: mcp320x: Speed up readout of single-channel ADCs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/6] iio: adc: mcp320x: Fix readout of negative voltages
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/6] iio: adc: mcp320x: Fix oops on module unload
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: light: tcs3472: support out-of-threshold events
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 7/7] iio: accel: kxcjk1013: add support for KXTF9
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 5/7] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 6/7] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 5/7] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 4/7] iio: accel: kxcjk1013: rename motion direction bits
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/7] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/7] iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/7] iio: accel: kxcjk1003: refactor ODR setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] dt-bindings: iio: pressure: add LPS33HW and LPS35HW device bindings
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/2] iio: pressure: add support to LPS33HW and LPS35HW
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/2] Add support to LPS33HW and LPS35HW pressure sensors
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 5/5] lmp92001: mfd: doc: Add support LMP92001
- From: s.abhisit@xxxxxxxxx
- [PATCH 3/5] lmp92001: mfd: iio: dac: Add support LMP92001
- From: s.abhisit@xxxxxxxxx
- [PATCH 2/5] lmp92001: mfd: iio: adc: Add support LMP92001
- From: s.abhisit@xxxxxxxxx
- [PATCH v3 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 4/5] iio: accel: add support to LIS2DW12
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 3/5] iio: st_sensors: do not always write enable_axis register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 2/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 1/5] iio: st_sensors: add register mask for status register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v3 0/5] Add support to LIS2DW12 accel sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH] iio: imu: inv_mpu6050: make arrays hz and d static
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH] iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Adriana Reus <adi.reus@xxxxxxxxx>
- [PATCH] IIO: BME280: Updates to Humidity readings need ctrl_reg write!
- From: Colin Parker <colin.foeparker@xxxxxxxxx>
- Re: [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 2/3] iio: Introduce the generic counter interface
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH 0/3] iio: Introduce the generic counter interface
- From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
- Re: [PATCH v2 0/5] Add support to LIS2DW12 accel sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [RESEND PATCH v3 3/9] dt-bindings: pwm: Add STM32 LPTimer PWM binding
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 5/9] dt-bindings: iio: Add STM32 LPTimer trigger binding
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 0/9] Add STM32 LPTimer: PWM, trigger and counter
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 2/9] mfd: Add STM32 LPTimer driver
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 7/9] dt-bindings: iio: Add STM32 LPTimer quadrature encoder and counter
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 4/9] pwm: Add STM32 LPTimer PWM driver
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 1/9] dt-bindings: mfd: Add STM32 LPTimer binding
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 9/9] iio: adc: stm32: add support for lptimer triggers
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 6/9] iio: trigger: Add STM32 LPTimer trigger driver
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [RESEND PATCH v3 8/9] iio: counter: Add support for STM32 LPTimer
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- Re: [PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Martin Kepplinger <martink@xxxxxxxxx>
- [PATCH v5] iio: accel: mma8452: improvements to handle multiple events
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH v2] iio: adc: ti-ads1015: add 10% to conversion wait time
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: multiplexer: check memory allocation failure
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH] iio: multiplexer: check memory allocation failure
- From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.
- From: Colin Foe-Parker <colin.foeparker@xxxxxxxxx>
- Re: Offline (more or less) until 3rd September.
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Offline (more or less) until 3rd September.
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2] iio: adc: ti-ads1015: add 10% to conversion wait time
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] IIO: BME280: Humidity: Changes to the humidity ctrl_hum require a write to ctrl_meas.
- From: Colin Parker <colin.foeparker@xxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1015: add 10% to conversion wait time
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- [PATCH v2] iio: chemical: ccs811: Add support for data ready trigger
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- Re: [PATCH 1/3] Documentation: dt: iio: at91-sama5d2_adc: add optional dma property
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] iio: adc: ti-ads1015: add 10% to conversion wait time
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH 1/2] iio: adc: ti-ads1015: write config register only on change
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH v4] iio: accel: mma8452: improvements to handle multiple events
- From: harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH] iio: adc: ti-ads1015: fix comparator polarity setting
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] iio: imu: inv_mpu6050: fix missing break in switch
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v4] iio: accel: mma8452: improvements to handle multiple events
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v4] iio: accel: mma8452: improvements to handle multiple events
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 0/3] iio: Introduce the generic counter interface
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: Introduce the generic counter interface
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: 104-quad-8: Add IIO generic counter interface support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] iio: imu: inv_mpu6050: fix missing break in switch
- From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH 0/6] IIO driver for MCP3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 1/6] iio: adc: mcp320x: Fix oops on module unload
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 4/6] iio: adc: mcp320x: Drop unnecessary of_device_id attributes
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 6/6] iio: adc: mcp320x: Add support for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 5/6] dt-bindings: iio: adc: mcp320x: Update for mcp3550/1/3
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 3/6] iio: adc: mcp320x: Speed up readout of single-channel ADCs
- From: Lukas Wunner <lukas@xxxxxxxxx>
- [PATCH 2/6] iio: adc: mcp320x: Fix readout of negative voltages
- From: Lukas Wunner <lukas@xxxxxxxxx>
- Re: [PATCH 3/6] iio: accel: kxcjk1013: rename registers for KXTF9 compatibility
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Add support for data ready trigger
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion
- From: Akinobu Mita <akinobu.mita@xxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] mfd: Add support for TI LMP92001
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH] mfd: Add support for TI LMP92001
- From: s.abhisit@xxxxxxxxx
- Re: [PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: [PATCH v2 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 7/7] iio: accel: kxcjk1013: add support for KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 6/7] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 5/7] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 4/7] iio: accel: kxcjk1013: rename motion direction bits
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 2/7] iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 3/7] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 1/7] iio: accel: kxcjk1003: refactor ODR setting
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH v2 0/7] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- Re: [PATCH 3/6] iio: accel: kxcjk1013: rename registers for KXTF9 compatibility
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- Re: [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: jmondi <jacopo@xxxxxxxxxx>
- [PATCH 4/4] staging: iio: tsl2x7x: constify i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- [PATCH] iio staging: tsl2x7x: clean up limit checks
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
- Re: [PATCH v4] iio: accel: mma8452: improvements to handle multiple events
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- Re: [PATCH v3 0/9] Add STM32 LPTimer: PWM, trigger and counter
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v3 4/9] pwm: Add STM32 LPTimer PWM driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PULL] Second set of IIO fixes for the 4.13 cycle.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PULL] Second set of new device support, features and cleanups for IIO in the 4.14 cycle.
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4] iio: accel: mma8452: improvements to handle multiple events
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: code improvements to handle more than one event
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH V2 00/45] IIO: Drop manual assignment of THIS_MODULE
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PULL] Second set of new device support, features and cleanups for IIO in the 4.14 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: code improvements to handle more than one event
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] iio: accel: mma8452: code improvements to handle more than one event
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 4/4] iio: magnetometer: ak8974: debug AMI306 calibration data
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- [PULL] Second set of IIO fixes for the 4.13 cycle.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: magnetometer: ak8974: add_device_randomness(fw + serial)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: magnetometer: ak8974: add_device_randomness(fw + serial)
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH 031/102] iio: adc: rockchip_saradc: explicitly request exclusive reset control
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 032/102] iio: dac: stm32-dac-core: explicitly request exclusive reset control
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 05/11] iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 04/11] iio: adc: ti-ads1015: avoid getting stale result after runtime resume
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/11] iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 02/11] iio: adc: ti-ads1015: fix scale information for ADS1115
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 10/11] iio: adc: ti-ads1015: use iio_device_claim_direct_mode()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 09/11] iio: adc: ti-ads1015: use devm_iio_triggered_buffer_setup
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 08/11] iio: adc: ti-ads1015: add helper to set conversion mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 01/11] iio: adc: ti-ads1015: fix incorrect data rate setting update
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 07/11] iio: adc: ti-ads1015: remove unnecessary config register update
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: code improvements to handle more than one event
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/4] iio: magnetometer: ak8974: debug AMI306 calibration data
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] iio: magnetometer: ak8974: debug AMI306 calibration data
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: magnetometer: ak8974: add_device_randomness(fw + serial)
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/4] iio: magnetometer: ak8974: support AMI306 variant
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFC PATCH v4 0/6] i2c: document DMA handling and add helpers for it
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 2/6] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/6] iio: accel: kxcjk1013: add support for KXTF9
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/6] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/6] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/6] iio: accel: kxcjk1013: rename registers for KXTF9 compatibility
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/6] iio: accel: kxcjk1003: refactor ODR setting
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: light: tsl2583: constify i2c_device_id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: light: apds9300: constify i2c_device_id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] iio: accel: bma180: constify i2c_device_id
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 1/3] iio: accel: bma180: constify i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 2/3] iio: light: apds9300: constify i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 3/3] iio: light: tsl2583: constify i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- [PATCH 0/3] constify iio i2c_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: Possible race in xilinx-xadc.ko
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH] iio: accel: mma8452: code improvements to handle more than one event
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 0/4] iio: magnetometer: ak8974: support AMI306
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Possible race in xilinx-xadc.ko
- From: Anton Volkov <avolkov@xxxxxxxxx>
- Re: [PATCH v4 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Add support for data ready trigger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: chemical: ccs811: Add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: srf08: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/5] iio: srf08: add device tree table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 4/5] iio: srf08: add sensor type srf10
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 3/5] iio: srf08: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: jmondi <jacopo@xxxxxxxxxx>
- Re: [PATCH v4 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v4 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 3/5] iio: srf08: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 4/5] iio: srf08: add sensor type srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 5/5] iio: srf08: add support for srf02 in i2c mode
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 2/5] iio: srf08: add device tree table
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v4 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 4/5] iio: accel: add support to LIS2DW12
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 3/5] iio: st_sensors: add register mask for status register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 2/5] iio: st_sensors: do not always write enable_axis register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH v2 0/5] Add support to LIS2DW12 accel sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 1/3] Documentation: dt: iio: at91-sama5d2_adc: add optional dma property
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 4/5] iio: accel: add support to LIS2DW12
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/5] iio: st_sensors: add register mask for status register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: st_sensors: do not always write enable_axis register
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/4] dt-bindings: iio: magn: add LIS2MDL sensor device binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/4] iio: magnetometer: add support to LIS2MDL
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/4] iio: magnetometer: st_magn: remove ihl property for LSM303AGR
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/4] iio: magnetometer: st_magn: fix status register address for LSM303AGR
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: select triggered buffer for sama5d2 adc
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH 6/6] iio: accel: kxcjk1013: add support for KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 5/6] iio: accel: kxcjk1013: make sampling_frequency_avail per-type
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 3/6] iio: accel: kxcjk1013: rename registers for KXTF9 compatibility
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 4/6] iio: accel: kxcjk1013: make sysfs/sampling_frequency_avail dynamic
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 2/6] iio: accel: kxcjk1013: extract report_motion_event() from interrupt handler
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 1/6] iio: accel: kxcjk1003: refactor ODR setting
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 0/6] iio: accel: kxcjk1003: support Kionix KXTF9
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [RFC PATCH v4 4/6] i2c: sh_mobile: use helper to decide if DMA is useful
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 1/6] i2c: add a message flag for DMA safe buffers
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 5/6] i2c: rcar: skip DMA if buffer is not safe
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 2/6] i2c: add helpers to ease DMA handling
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [RFC PATCH v4 0/6] i2c: document DMA handling and add helpers for it
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 4/4] iio: magnetometer: ak8974: debug AMI306 calibration data
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 1/4] iio: magnetometer: ak8974: support AMI306 variant
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 2/4] iio: magnetometer: ak8974: add_device_randomness(fw + serial)
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 3/4] iio: magnetometer: ak8974: mark INT_CLEAR as precious
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- [PATCH 0/4] iio: magnetometer: ak8974: support AMI306
- From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- [PATCH] iio: chemical: ccs811: Add support for data ready trigger
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- [PATCH v2] iio: chemical: ccs811: Add triggered buffer support
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH 4/4] dt-bindings: iio: magn: add LIS2MDL sensor device binding
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 0/4] Add support to LIS2MDL magnetometer sensor
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] Add support to LIS2MDL magnetometer sensor
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/4] i2c: add helpers to ease DMA handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v3 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 3/5] iio: srf08: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 5/5] iio: srf08: add support for srf02 in i2c mode
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 4/5] iio: srf08: add sensor type srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 2/5] iio: srf08: add device tree table
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v3 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 5/5] dt-bindings: iio: accel: add LIS2DW12 sensor device binding
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 4/5] iio: accel: add support to LIS2DW12
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 3/5] iio: st_sensors: add register mask for status register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 2/5] iio: st_sensors: do not always write enable_axis register
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/5] iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/5] Add support to LIS2DW12 accel sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 0/4] Add support to LIS2MDL magnetometer sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 4/4] dt-bindings: iio: magn: add LIS2MDL sensor device binding
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 3/4] iio: magnetometer: add support to LIS2MDL
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/4] iio: magnetometer: st_magn: fix status register address for LSM303AGR
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 2/4] iio: magnetometer: st_magn: remove ihl property for LSM303AGR
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/4] Add support to LIS2MDL magnetometer sensor
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH v3 1/4] i2c: add helpers to ease DMA handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/4] i2c: add helpers to ease DMA handling
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/5] iio: srf08: add triggered buffer support
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH v2 5/5] iio: srf08: add support for srf02 in i2c mode
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- Re: [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH] iio: adc: select triggered buffer for sama5d2 adc
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] HID: sensor: constify platform_device_id
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH v2 4/8] platform/chrome: cros_ec: register shutdown function for debugfs
- From: Benson Leung <bleung@xxxxxxxxxx>
- Re: [PATCH v2 3/8] mfd: cros_ec: Stop the debugfs work when suspended
- From: Benson Leung <bleung@xxxxxxxxxx>
- [PATCH] iio: accel: mma8452: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2 5/5] iio: srf08: add support for srf02 in i2c mode
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 4/5] iio: srf08: add sensor type srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 3/5] iio: srf08: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 2/5] iio: srf08: add device tree table
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 1/5] iio: srf08: add device tree binding for srf02 and srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH v2 0/5] iio: srf08: add support for similar devices and triggered buffers
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v3 10/13] ARM: dts: rockchip: add saradc support for rv1108
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] mfd: twl: move header file out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 10/13] ARM: dts: rockchip: add saradc support for rv1108
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- [PATCH] HID: sensor: constify platform_device_id
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: [PATCH v2 03/10] iio: humidity: hts221: do not overwrite reserved data during power-down
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- Re: [PATCH v3 09/13] dt-bindings: adc: add description for rv1108 saradc
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/8] iio: cros_ec: Relax sampling frequency before suspending
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: accel: st_accel: fix data-ready line configuration
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/8] iio: cros_ec: Relax sampling frequency before suspending
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] staging: iio: adc: fix error return code in ad7606_par_probe()
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2] iio: adc: Fix coding style violations
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: adc: at91-sama5d2_adc: add support for DMA
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: timer: stm32: add support for STM32H7
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/7] iio: srf08: add sensor type srf10
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/7] iio: srf08: add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 4/7] iio: srf08: add device tree table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 5/7] iio: srf08: add support for srf02 in i2c mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 6/7] iio: srf08: add buffered to device mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 7/7] iio: srf08: change text in Kconfig
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 19/23] dt-bindings: adc: add description for rv1108 saradc
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1015: use dynamically generated attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/10] iio: humidity: hts221: do not overwrite reserved data during power-down
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 03/10] iio: humidity: hts221: do not overwrite reserved data during power-down
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 2/2] iio: accel: st_accel: fix data-ready line configuration
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 1/2] iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- [PATCH 0/2] iio: st_sensors: fix data-ready pin configuration
- From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: jmondi <jacopo@xxxxxxxxxx>
- [PATCH v2 1/8] iio: cros_ec: Relax sampling frequency before suspending
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 2/8] mfd: cros_ec_i2c: move the system sleep pm ops to late
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 0/8] platform/chrome: cros_ec: Fixes and improvements
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 4/8] platform/chrome: cros_ec: register shutdown function for debugfs
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 3/8] mfd: cros_ec: Stop the debugfs work when suspended
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 7/8] platform/chrome: cros_ec: Add sysfs entry to set keyboard wake lid angle
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 5/8] mfd: cros_ec: fail early if we cannot identify the EC
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 8/8] platform/chrome: cros_ec: sysfs: Modify error handling
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- [PATCH v2 6/8] mfd: cros_ec_i2c: add ACPI module device table
- From: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
- Re: [RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Bastien Nocera <hadess@xxxxxxxxxx>
- [PATCH v3 10/13] ARM: dts: rockchip: add saradc support for rv1108
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- [PATCH v3 09/13] dt-bindings: adc: add description for rv1108 saradc
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- [PATCH v3 00/13] Support more devices on rockchip rv1108
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] iio: cros_ec: Relax sampling frequency before suspending
- From: Benson Leung <bleung@xxxxxxxxxx>
- [RFT][PATCH] iio: hid-sensor-trigger: Fix the race with user space powering up sensors
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: timer: stm32: add support for STM32H7
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 19/23] dt-bindings: adc: add description for rv1108 saradc
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/3] ARM: dts: at91: sama5d2: added dma property for ADC device
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH 0/3] iio: adc: at91-sama5d2_adc: add DMA support
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH 1/3] Documentation: dt: iio: at91-sama5d2_adc: add optional dma property
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- [PATCH 3/3] iio: adc: at91-sama5d2_adc: add support for DMA
- From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
- Re: [PATCH 1/7] iio: srf08: add device tree binding for srf02 and srf10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] iio: adc: Fix coding style violations
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- [PATCH v2] iio: adc: Fix coding style violations
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Harinath Nampally <harinath922@xxxxxxxxx>
- Re: [PATCH 1/7] iio: srf08: add device tree binding for srf02 and srf10
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: iio: timer: stm32: add support for STM32H7
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/3] iio: trigger: stm32-timer: add output compare triggers
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/3] iio: trigger: stm32-timer: add support for STM32H7
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] hid-sensor-hub: Force logical minimum to 1 for power and report state
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1015: use dynamically generated attributes
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ti-ads1015: fix conversion time
- From: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
- [PATCH] staging: iio: adc: fix error return code in ad7606_par_probe()
- From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
- Re: [PATCH] iio: trigger: stm32-timer: fix get trigger mode
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: imu: adis16480: Fix acceleration scale factor for adis16480
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] hid-sensor-hub: Force logical minimum to 1 for power and report state
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Add triggered buffer support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: chemical: ccs811: Add ACPI support
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ti-ads1015: fix conversion time
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 2/2] iio: adc: ti-ads1015: use dynamically generated attributes
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: PATCH] iio: Fix some documentation warnings
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v1 1/2] iio: tools: move to tools buildsystem
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads7950: Add OF device ID table
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 3/3] iio: adc: stm32: add optional st,min-sample-time-nsecs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: iio: adc: stm32: add optional st,min-sample-time-nsecs
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] iio: adc: Fix coding style violations
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH] iio: adc: Fix coding style violations
- From: Michal Simek <michal.simek@xxxxxxxxxx>
- Re: [linux-sunxi] [PATCH v3 1/5] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Vincent Legoll <vincent.legoll@xxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] hid-sensor-hub: Force logical minimum to 1 for power and report state
- From: Jiri Kosina <jikos@xxxxxxxxxx>
- Re: [PATCH 5/5] Documentation: bindings: Add ti,lmp92001
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH] hid-sensor-hub: Force logical minimum to 1 for power and report state
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: imu: adis16480: Fix acceleration scale factor for adis16480
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
- [PATCH] iio: imu: adis16480: Fix acceleration scale factor for adis16480
- From: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: iio: adc: stm32: add optional st,min-sample-time-nsecs
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3 1/5] dt-bindings: update the Allwinner GPADC device tree binding for H3
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH 2/4] HID: sensor: constify attribute_group structures.
- From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
- Re: [PATCH 2/5] iio: Add support for LMP92001 ADC
- From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
- [PATCH] iio: trigger: stm32-timer: fix get trigger mode
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 3/3] iio: trigger: stm32-timer: add output compare triggers
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 2/3] iio: trigger: stm32-timer: add support for STM32H7
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 1/3] dt-bindings: iio: timer: stm32: add support for STM32H7
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 0/3] iio: trigger: stm32-timer: add STM32H7 variant
- From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
- [PATCH 6/7] iio: srf08: add buffered to device mode
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 7/7] iio: srf08: change text in Kconfig
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 5/7] iio: srf08: add support for srf02 in i2c mode
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 4/7] iio: srf08: add device tree table
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 3/7] iio: srf08: add triggered buffer support
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 2/7] iio: srf08: add sensor type srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 1/7] iio: srf08: add device tree binding for srf02 and srf10
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH 0/7] iio: srf08: add support for similar devices and triggered buffers
- From: Andreas Klinger <ak@xxxxxxxxxxxxx>
- [PATCH] iio: chemical: ccs811: Add ACPI support
- From: Narcisa Ana Maria Vasile <narcisaanamaria12@xxxxxxxxx>
- [PATCH v2 19/23] dt-bindings: adc: add description for rv1108 saradc
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- [PATCH v2 00/23] Support more devices on rockchip rv1108
- From: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: adc: ti-ads1015: fix conversion time
- From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: David Lechner <david@xxxxxxxxxxxxxx>
- Re: [PATCH v1 1/2] iio: adc: ti-ads7951: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] iio: accel: Bugfix to enbale and allow different events to work parallely.
- From: Martin Kepplinger <martink@xxxxxxxxx>
- Re: [PATCH v1 1/2] iio: tools: move to tools buildsystem
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] iio: adc: ti-ads7950: Add OF device ID table
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] iio: adc: ti-ads7950: Allow to use on ACPI platforms
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Scanners]
[Yosemite Forum]