On Wed, 21 Mar 2018 11:28:57 -0300
Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx> wrote:
> Signed-off-by: Hernán Gonzalez <hernan@xxxxxxxxxxxxxxxxxxxx>
Device tree bindings must be cc'd to the device tree binding maintainers
and the devicetree binding list.
Comments inline but don't forget to cc them on v2.
Jonathan
> ---
> .../devicetree/bindings/staging/iio/cdc/ad7746.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
>
> diff --git a/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
> new file mode 100644
> index 0000000..13d0056
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/staging/iio/cdc/ad7746.txt
> @@ -0,0 +1,32 @@
> +Analog Devices AD7746/5/7 capacitive sensor driver
> +
> +Required properties:
> + - compatible: Should be one of
> + * "adi,ad7745": When using the AD7745 device
> + * "adi,ad7746": When using the AD7746 device
> + * "adi,ad7747": When using the AD7747 device
The when using bit is kind of obvious. Probably no need to state.
> + - reg: The 7-bits long I2c address of the device
> +
> +Optional properties:
> + - adi,exclvl: 0 = +-VDD/8
> + 1 = +-VDD/4
> + 2 = +-VDD * 3/8
> + 3 = +-VDD/2 (Default)
That needs a comment to explain what exactly it is rather than
just documenting the enum values.
> + - adi,nexca_en: Invert excitation output A.
> + - adi,nexcb_en: Invert excitation output B.
> +
> +Example:
> +Here exclvl would be 1 (VDD/4), Excitation pin A would be inverted and
> +Excitation pin B would NOT be inverted.
> +
> +i2c2 {
> +
> + < . . . >
> +
> + ad7746: ad7746@60 {
> + compatible = "ad7746";
> + reg = <0x60>;
> + adi,exclvl = <1>;
> + adi,nexca_en;
> + };
> +};
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
