The manual states that the data is contained in the upper 12 bits
of the 16 bits read by spi. The code that extracts these 12 bits
is correct for both be and le machines, but this is not clear
from a first glance.
To improve readability the relevant expressions are replaced
with equivalent expressions that use be16_to_cpup.
Signed-off-by: David Veenstra <davidjulianveenstra@xxxxxxxxx>
---
drivers/staging/iio/resolver/ad2s1200.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/iio/resolver/ad2s1200.c b/drivers/staging/iio/resolver/ad2s1200.c
index eceb86e952de..e0e7c88368ed 100644
--- a/drivers/staging/iio/resolver/ad2s1200.c
+++ b/drivers/staging/iio/resolver/ad2s1200.c
@@ -58,7 +58,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
{
struct ad2s1200_state *st = iio_priv(indio_dev);
int ret = 0;
- s16 vel;
+ u16 vel;
mutex_lock(&st->lock);
gpio_set_value(st->sample, 0);
@@ -74,14 +74,13 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
return ret;
}
+ vel = be16_to_cpup((__be16 *)st->rx);
switch (chan->type) {
case IIO_ANGL:
- *val = (((u16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
+ *val = vel >> 4;
break;
case IIO_ANGL_VEL:
- vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
- vel = sign_extend32(vel, 11);
- *val = vel;
+ *val = sign_extend32((s16)vel >> 4, 11);
break;
default:
mutex_unlock(&st->lock);
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
