Re: [PATCH 10/12] staging: iio: tsl2x7x: make logging consistent and correct newlines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat,  3 Mar 2018 20:49:40 -0500
Brian Masney <masneyb@xxxxxxxxxxxxx> wrote:

> This patch updates all of the logging commands so that they are
> consistent with the other messages, includes __func__ in the message,
> and all of the messages include newlines.
> 
> This patch also removes some debug log messages from tsl2x7x_prox_cal().
> 
> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Hmm. I nearly fixed this one up but there are a few too many elements I don't
agree with.

> ---
>  drivers/staging/iio/light/tsl2x7x.c | 58 ++++++++++++++++++++-----------------
>  1 file changed, 31 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
> index da7a4e025083..fb91c46c8747 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -378,7 +378,8 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
>  		ret = i2c_smbus_read_byte_data(chip->client, reg);
>  		if (ret < 0) {
>  			dev_err(&chip->client->dev,
> -				"failed to read. err=%x\n", ret);
> +				"%s: failed to read from register %x: %d\n",
> +				__func__, reg, ret);
>  			goto out_unlock;
>  		}
>  
> @@ -424,7 +425,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
>  
>  	/* note: lux is 31 bit max at this point */
>  	if (ch1lux > ch0lux) {
> -		dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n");
> +		dev_dbg(&chip->client->dev,
> +			"%s: ch1lux > ch0lux; returning last value\n",
> +			__func__);
>  		ret = chip->als_cur_info.lux;
>  		goto out_unlock;
>  	}
> @@ -600,7 +603,8 @@ static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
>  
>  	chip->settings.als_gain_trim = ret;
>  	dev_info(&chip->client->dev,
> -		 "%s als_calibrate completed\n", chip->client->name);
> +		 "%s: %s ALS calibration successfully completed\n",
> +		 __func__, chip->client->name);
I'm happy with having function name in errors, but it's just noise in info
prints.

Mind you this dev_info should go or become dev_dbg - it is superflous
detail to put in the kernel logs.

>  
>  	return ret;
>  }
> @@ -644,7 +648,8 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>  	/* and make sure we're not already on */
>  	if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
>  		/* if forcing a register update - turn off, then on */
> -		dev_info(&chip->client->dev, "device is already enabled\n");
> +		dev_info(&chip->client->dev, "%s: device is already enabled\n",
> +			 __func__);
Again noise.  dev_dbg or drop entirely as it doesn't need to be logged.
>  		return -EINVAL;
>  	}
>  
> @@ -681,12 +686,14 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>  	 */
>  	for (i = 0, dev_reg = chip->tsl2x7x_config;
>  			i < TSL2X7X_MAX_CONFIG_REG; i++) {
> -		ret = i2c_smbus_write_byte_data(chip->client,
> -						TSL2X7X_CMD_REG + i,
> +		int reg = TSL2X7X_CMD_REG + i;
> +
> +		ret = i2c_smbus_write_byte_data(chip->client, reg,
>  						*dev_reg++);
>  		if (ret < 0) {
>  			dev_err(&chip->client->dev,
> -				"failed on write to reg %d.\n", i);
> +				"%s: failed to write to register %x: %d\n",
> +				__func__, reg, ret);
>  			return ret;
>  		}
>  	}
> @@ -708,7 +715,8 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
>  	chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
>  
>  	if (chip->settings.interrupts_en != 0) {
> -		dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
> +		dev_info(&chip->client->dev, "%s: Setting up interrupt(s)\n",
> +			 __func__);
>  
>  		reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
>  		if (chip->settings.interrupts_en == 0x20 ||
> @@ -819,8 +827,8 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
>  
>  	if (chip->settings.prox_max_samples_cal > MAX_SAMPLES_CAL) {
>  		dev_err(&chip->client->dev,
> -			"max prox samples cal is too big: %d\n",
> -			chip->settings.prox_max_samples_cal);
> +			"%s: prox_max_samples_cal %d is too big\n",
> +			__func__, chip->settings.prox_max_samples_cal);
>  		chip->settings.prox_max_samples_cal = MAX_SAMPLES_CAL;
>  	}
>  
> @@ -845,8 +853,6 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
>  		if (ret < 0)
>  			return ret;
>  		prox_history[i] = chip->prox_data;
> -		dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
> -			 i, chip->prox_data);
>  	}
>  
>  	ret = tsl2x7x_chip_off(indio_dev);
> @@ -857,12 +863,6 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
>  			       chip->settings.prox_max_samples_cal, cal);
>  	chip->settings.prox_thres_high = (cal->max << 1) - cal->mean;
>  
> -	dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
> -		 cal->min, cal->mean, cal->max);
> -	dev_info(&chip->client->dev,
> -		 "%s proximity threshold set to %d\n",
> -		 chip->client->name, chip->settings.prox_thres_high);
> -
>  	/* back to the way they were */
>  	chip->settings.interrupts_en = tmp_irq_settings;
>  	if (current_state == TSL2X7X_CHIP_WORKING) {
> @@ -1000,12 +1000,14 @@ static ssize_t in_illuminance0_lux_table_store(struct device *dev,
>  	n = value[0];
>  	if ((n % 3) || n < 6 ||
>  	    n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
> -		dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
> +		dev_info(dev, "%s: lux table input error 1. n=%d\n",
> +			 __func__, n);
>  		return -EINVAL;
>  	}
>  
>  	if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
> -		dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
> +		dev_info(dev, "%s: lux table input error 2. n=%d\n",
> +			 __func__, n);
dev_dbg or drop it.

>  		return -EINVAL;
>  	}
>  
> @@ -1150,14 +1152,14 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
>  			chip->settings.persistence &= 0xF0;
>  			chip->settings.persistence |=
>  				(filter_delay & 0x0F);
> -			dev_info(&chip->client->dev, "%s: ALS persistence = %d",
> +			dev_info(&chip->client->dev, "%s: ALS persistence = %d\n",
>  				 __func__, filter_delay);
Again, dev_dbg at the most - or drop it.

>  		} else {
>  			chip->settings.persistence &= 0x0F;
>  			chip->settings.persistence |=
>  				((filter_delay << 4) & 0xF0);
>  			dev_info(&chip->client->dev,
> -				 "%s: Proximity persistence = %d",
> +				 "%s: Proximity persistence = %d\n",
>  				 __func__, filter_delay);
>  		}
>  		ret = 0;
> @@ -1372,7 +1374,7 @@ static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
>  		chip->settings.als_time =
>  			TSL2X7X_MAX_TIMER_CNT - (val2 / TSL2X7X_MIN_ITIME);
>  
> -		dev_info(&chip->client->dev, "%s: als time = %d",
> +		dev_info(&chip->client->dev, "%s: als time = %d\n",
>  			 __func__, chip->settings.als_time);
Drop it.
>  		break;
>  	default:
> @@ -1738,8 +1740,9 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
>  
>  	ret = i2c_smbus_write_byte(clientp, TSL2X7X_CMD_REG | TSL2X7X_CNTRL);
>  	if (ret < 0) {
> -		dev_err(&clientp->dev, "write to cmd reg failed. err = %d\n",
> -			ret);
> +		dev_err(&clientp->dev,
> +			"%s: Failed to write to CMD register: %d\n",
> +			__func__, ret);
>  		return ret;
>  	}
>  
> @@ -1773,7 +1776,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
>  						indio_dev);
>  		if (ret) {
>  			dev_err(&clientp->dev,
> -				"%s: irq request failed", __func__);
> +				"%s: IRQ request failed\n", __func__);
>  			return ret;
>  		}
>  	}
> @@ -1790,7 +1793,8 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
>  		return ret;
>  	}
>  
> -	dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
> +	dev_info(&clientp->dev, "%s: %s Light sensor found.\n", __func__,
> +		 id->name);

Again, unnecessary logging.  Definitely doesn't also want the function name.
People 'might' care about whether the sensor is found, but not which function
it is in.

Jonathan

>  
>  	return 0;
>  }

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux