[adding linux-iio mailing list] On 05/08/2018 06:12 PM, jarul wrote: > I would like to ask a question and if anybody can answer my question, I would > very much appreciate. > > I am using Z706 and AD9361. I have setup the SD card image on the server > side and I have a client machine which is a Linux machine. I am using > ad9361-iiostream file where I send my data using sin and cos function to DAC > and try to get the output from DAC. If I send the random number which does > not exceed 2047, do the left shift 4 bit and send the data to DAC. It > creates a nice waveform file and the waveform can be seen on oscilloscope > clearly. Using random number I can get the output from DAC. However, when I > send the sin and cos function, the output from DAC can not be captured or I > get just 0 and one single value as output. > > I have used iio_channel_read_raw function to capture the output else > iio_channel_read function to capture the output from DAC. I want to capture > the DAC output and then send the output to ADC and finally I want to capture > the ADC output to compare the digital data on both side. > > Can any export or whoever is familiar with the subject libiio can answer my > question. Thanks a lot. > > > > -- > Sent from: http://linux-kernel.2935.n7.nabble.com/ -- ~Randy -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
