Just some minor grammar/spelling fixes of things I noticed while reading
the code.
Signed-off-by: Martin Kelly <mkelly@xxxxxxxx>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index aafa77766b08..59dbdeb08da4 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -176,7 +176,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
return result;
if (en) {
- /* Wait for output stabilize */
+ /* Wait for output to stabilize */
msleep(INV_MPU6050_TEMP_UP_TIME);
if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
/* switch internal clock to PLL */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 90fdc5eaef53..65dcb92be9f6 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -53,7 +53,7 @@ static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id)
mutex_lock(&st->lock);
- /* It doesn't really mattter, if any of the calls fails */
+ /* It doesn't really matter if any of the calls fail */
regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask);
inv_mpu6050_set_power_itg(st, false);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index e51404fdce97..0cb7c20100ca 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -155,7 +155,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
/*
- * read fifo_count register to know how many bytes inside FIFO
+ * read fifo_count register to know how many bytes are inside the FIFO
* right now
*/
result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data,
@@ -165,7 +165,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
fifo_count = be16_to_cpup((__be16 *)(&data[0]));
if (fifo_count < bytes_per_datum)
goto end_session;
- /* fifo count can't be odd number, if it is odd, reset fifo*/
+ /* fifo count can't be an odd number. If it is odd, reset the FIFO. */
if (fifo_count & 1)
goto flush_fifo;
if (fifo_count > INV_MPU6050_FIFO_THRESHOLD)
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
