On Tue, 1 May 2018 10:56:41 -0700
Martin Kelly <mkelly@xxxxxxxx> wrote:
> Just some minor grammar/spelling fixes of things I noticed while reading
> the code.
>
> Signed-off-by: Martin Kelly <mkelly@xxxxxxxx>
Good to clean this sort of thing up.
Thanks and applied to the togreg branch of iio.git and
pushed out as testing for the autobuilders to ignore it ;)
Thanks,
Jonathan
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
> drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 4 ++--
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index aafa77766b08..59dbdeb08da4 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -176,7 +176,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
> return result;
>
> if (en) {
> - /* Wait for output stabilize */
> + /* Wait for output to stabilize */
> msleep(INV_MPU6050_TEMP_UP_TIME);
> if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
> /* switch internal clock to PLL */
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> index 90fdc5eaef53..65dcb92be9f6 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> @@ -53,7 +53,7 @@ static int inv_mpu6050_deselect_bypass(struct i2c_mux_core *muxc, u32 chan_id)
>
> mutex_lock(&st->lock);
>
> - /* It doesn't really mattter, if any of the calls fails */
> + /* It doesn't really matter if any of the calls fail */
> regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask);
> inv_mpu6050_set_power_itg(st, false);
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index e51404fdce97..0cb7c20100ca 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -155,7 +155,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
> bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
>
> /*
> - * read fifo_count register to know how many bytes inside FIFO
> + * read fifo_count register to know how many bytes are inside the FIFO
> * right now
> */
> result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data,
> @@ -165,7 +165,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
> fifo_count = be16_to_cpup((__be16 *)(&data[0]));
> if (fifo_count < bytes_per_datum)
> goto end_session;
> - /* fifo count can't be odd number, if it is odd, reset fifo*/
> + /* fifo count can't be an odd number. If it is odd, reset the FIFO. */
> if (fifo_count & 1)
> goto flush_fifo;
> if (fifo_count > INV_MPU6050_FIFO_THRESHOLD)
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
