From: Borys Movchan <borysmn@xxxxxxxx> Add Intersil ISL29033 Ultra-Low Lux, Low Power, Integrated Digital Ambient Light Sensor driver. The ISL29033 is an integrated ambient and infrared light-to-digital converter. Its advanced, self-calibrated photodiode array emulates human eye response with excellent IR rejection. The on-chip 16-bit ADC is capable of rejecting 50Hz and 60Hz flicker caused by artificial light sources. The lux range select feature allows users to program the lux range for optimized counts/lux. datasheet: https://www.intersil.com/content/dam/intersil/documents/isl2/isl29033.pdf Signed-off-by: Borys Movchan <borys.movchan@xxxxxxxx> --- .../devicetree/bindings/iio/light/isl29033.txt | 17 + drivers/iio/light/Kconfig | 9 + drivers/iio/light/Makefile | 1 + drivers/iio/light/isl29033.c | 766 +++++++++++++++++++++ 4 files changed, 793 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/isl29033.txt create mode 100644 drivers/iio/light/isl29033.c diff --git a/Documentation/devicetree/bindings/iio/light/isl29033.txt b/Documentation/devicetree/bindings/iio/light/isl29033.txt new file mode 100644 index 000000000000..41870aeacebf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/isl29033.txt @@ -0,0 +1,17 @@ +ISL29033 Ultra low lux ambient light sensor + +Required properties: + - compatible : Must be "isil,isl29033". + - reg: the I2C address of the device + +Optional properties: + - rext: Rext resistor nominal (in kOhm) + +Example: + + als_sensor@44 { + compatible = "isil,isl29033"; + reg = <0x44>; + rext = <1000>; + }; + diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 074e50657366..2d845618e6b0 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -182,6 +182,15 @@ config SENSORS_ISL29028 Proximity value via iio. The ISL29028 provides the concurrent sensing of ambient light and proximity. +config SENSORS_ISL29033 + tristate "Intersil ISL29033 Ultra-Low Lux, Low Power, Integrated Digital Ambient Light Sensor" + depends on I2C + select REGMAP_I2C + help + Provides driver for the Intersil's ISL29033 device. + This driver supports the sysfs interface to get the ALS and IR intensity + value via IIO. + config ISL29125 tristate "Intersil ISL29125 digital color light sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index f1777036d4f8..98f5f1f0a45a 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o obj-$(CONFIG_HID_SENSOR_PROX) += hid-sensor-prox.o obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o +obj-$(CONFIG_SENSORS_ISL29033) += isl29033.o obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o diff --git a/drivers/iio/light/isl29033.c b/drivers/iio/light/isl29033.c new file mode 100644 index 000000000000..8b38fd718c1f --- /dev/null +++ b/drivers/iio/light/isl29033.c @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * isl29033.c: A iio driver for the light sensor ISL 29033. + * + * IIO driver for monitoring ambient light intensity in lux and infrared + * sensing. + * + * Copyright (c) 2018, Axis Communication AB + * Author: Borys Movchan <Borys.Movchan@xxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <asm/div64.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/acpi.h> + +#define ISL29033_REG_ADD_COMMAND1 0x00 +#define ISL29033_CMD1_OPMODE_SHIFT 5 +#define ISL29033_CMD1_OPMODE_MASK (7 << ISL29033_CMD1_OPMODE_SHIFT) +#define ISL29033_CMD1_OPMODE_POWER_DOWN 0 +#define ISL29033_CMD1_OPMODE_ALS_CONT 5 +#define ISL29033_CMD1_OPMODE_IR_CONT 6 + +#define ISL29033_REG_ADD_COMMAND2 0x01 +#define ISL29033_CMD2_RESOLUTION_SHIFT 2 +#define ISL29033_CMD2_RESOLUTION_MASK (0x3 << ISL29033_CMD2_RESOLUTION_SHIFT) + +#define ISL29033_CMD2_RANGE_SHIFT 0 +#define ISL29033_CMD2_RANGE_MASK (0x3 << ISL29033_CMD2_RANGE_SHIFT) + +#define ISL29033_CMD2_SCHEME_SHIFT 7 +#define ISL29033_CMD2_SCHEME_MASK (0x1 << ISL29033_CMD2_SCHEME_SHIFT) + +#define ISL29033_REG_ADD_DATA_LSB 0x02 +#define ISL29033_REG_ADD_DATA_MSB 0x03 + +#define ISL29033_REG_TEST 0x08 +#define ISL29033_TEST_SHIFT 0 +#define ISL29033_TEST_MASK (0xFF << ISL29033_TEST_SHIFT) + +#define ISL29033_REF_REXT 499 /* In kOhm */ + +#define ISL29033_MICRO 1000000 + +enum isl29033_int_time { + ISL29033_INT_TIME_16, + ISL29033_INT_TIME_12, + ISL29033_INT_TIME_8, + ISL29033_INT_TIME_4, +}; + +#define isl29033_int_utime(adcmax) \ + ((unsigned int)(adcmax) * (ISL29033_MICRO / 1000) / 655) + +static const unsigned int isl29033_int_utimes[4] = { + isl29033_int_utime(65536), + isl29033_int_utime(4096), + isl29033_int_utime(256), + isl29033_int_utime(16) +}; + +#define isl29033_mkscale(range, adcmax) \ + { (range) / (adcmax), \ + ((unsigned int)(range) * (ISL29033_MICRO / 10) \ + / (adcmax) * 10) % ISL29033_MICRO } + +static const struct isl29033_scale { + unsigned int scale; + unsigned int uscale; +} isl29033_scales[4][4] = { + { + isl29033_mkscale(125, 65536), isl29033_mkscale(500, 65536), + isl29033_mkscale(2000, 65536), isl29033_mkscale(8000, 65536) + }, + { + isl29033_mkscale(125, 4096), isl29033_mkscale(500, 4096), + isl29033_mkscale(2000, 4096), isl29033_mkscale(8000, 4096) + }, + { + isl29033_mkscale(125, 256), isl29033_mkscale(500, 256), + isl29033_mkscale(2000, 256), isl29033_mkscale(8000, 256) + }, + { + isl29033_mkscale(125, 16), isl29033_mkscale(500, 16), + isl29033_mkscale(2000, 16), isl29033_mkscale(8000, 16) + } +}; + + +struct isl29033_chip { + struct regmap *regmap; + struct mutex lock; + unsigned int int_time; + unsigned int calibscale; + unsigned int ucalibscale; + struct isl29033_scale scale; + unsigned int rext; + unsigned int opmode; + bool suspended; + +}; + +#define isl29033_rext_normalize(chip, val) \ + ((val) * ISL29033_REF_REXT / (chip)->rext) + +static unsigned int isl29033_rext_normalize2(struct isl29033_chip *chip, + unsigned int val, unsigned int val2) +{ + val = val - isl29033_rext_normalize(chip, val) + * chip->rext / ISL29033_REF_REXT; + val2 = (val2 + val * ISL29033_MICRO) * ISL29033_REF_REXT / chip->rext; + return val2; +} + +static int isl29033_set_integration_time(struct isl29033_chip *chip, + unsigned int utime) +{ + unsigned int i; + int ret; + unsigned int int_time, new_int_time; + + for (i = 0; i < ARRAY_SIZE(isl29033_int_utimes); ++i) { + if (utime == isl29033_int_utimes[i] + * chip->rext / ISL29033_REF_REXT) { + new_int_time = i; + break; + } + } + + if (i >= ARRAY_SIZE(isl29033_int_utimes)) + return -EINVAL; + + ret = regmap_update_bits(chip->regmap, ISL29033_REG_ADD_COMMAND2, + ISL29033_CMD2_RESOLUTION_MASK, + i << ISL29033_CMD2_RESOLUTION_SHIFT); + if (ret < 0) + return ret; + + /* Keep the same range when integration time changes */ + int_time = chip->int_time; + for (i = 0; i < ARRAY_SIZE(isl29033_scales[int_time]); ++i) { + if (chip->scale.scale == isl29033_scales[int_time][i].scale && + chip->scale.uscale == isl29033_scales[int_time][i].uscale) { + chip->scale = isl29033_scales[new_int_time][i]; + break; + } + } + chip->int_time = new_int_time; + + return 0; +} + +static int isl29033_set_scale(struct isl29033_chip *chip, int scale, int uscale) +{ + unsigned int i; + int ret; + struct isl29033_scale new_scale; + + for (i = 0; i < ARRAY_SIZE(isl29033_scales[chip->int_time]); ++i) { + if (scale == + isl29033_rext_normalize(chip, + isl29033_scales[chip->int_time][i].scale) + && uscale == + isl29033_rext_normalize2(chip, + isl29033_scales[chip->int_time][i].scale, + isl29033_scales[chip->int_time][i].uscale)) { + new_scale = isl29033_scales[chip->int_time][i]; + break; + } + } + + if (i >= ARRAY_SIZE(isl29033_scales[chip->int_time])) + return -EINVAL; + + ret = regmap_update_bits(chip->regmap, ISL29033_REG_ADD_COMMAND2, + ISL29033_CMD2_RANGE_MASK, + i << ISL29033_CMD2_RANGE_SHIFT); + if (ret < 0) + return ret; + + chip->scale = new_scale; + + return 0; +} + +static int isl29033_set_mode(struct isl29033_chip *chip, int mode) +{ + + int ret; + + ret = regmap_update_bits(chip->regmap, ISL29033_REG_ADD_COMMAND1, + ISL29033_CMD1_OPMODE_MASK, + mode << ISL29033_CMD1_OPMODE_SHIFT); + if (ret < 0) { + struct device *dev = regmap_get_device(chip->regmap); + + dev_err(dev, + "Error in setting operating mode with err %d\n", ret); + return ret; + } + + if (chip->int_time < 20000) + usleep_range(chip->int_time, chip->int_time * 2); + else + msleep(chip->int_time / 1000); + + return 0; +} + +static int isl29033_read_sensor_input(struct isl29033_chip *chip) +{ + int ret; + unsigned int lsb; + unsigned int msb; + struct device *dev = regmap_get_device(chip->regmap); + + if (chip->opmode == ISL29033_CMD1_OPMODE_POWER_DOWN) + return -EBUSY; + + ret = regmap_read(chip->regmap, ISL29033_REG_ADD_DATA_LSB, &lsb); + if (ret < 0) { + dev_err(dev, + "Error in reading LSB DATA with err %d\n", ret); + return ret; + } + + ret = regmap_read(chip->regmap, ISL29033_REG_ADD_DATA_MSB, &msb); + if (ret < 0) { + dev_err(dev, + "Error in reading MSB DATA with err %d\n", ret); + return ret; + } + dev_vdbg(dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb); + + return (msb << 8) | lsb; +} + +static int isl29033_read_lux(struct isl29033_chip *chip, int *lux, int *ulux) +{ + int ret; + unsigned int tmpres; + + ret = isl29033_read_sensor_input(chip); + if (ret < 0) + return ret; + + ret++; + + tmpres = ret * isl29033_rext_normalize2(chip, chip->scale.scale, + chip->scale.uscale); + *lux = ret * isl29033_rext_normalize(chip, chip->scale.scale) + + tmpres / ISL29033_MICRO; + *ulux = tmpres % ISL29033_MICRO; + + *lux = *lux * chip->calibscale; + *ulux = *ulux * chip->calibscale + *lux * chip->ucalibscale + + *ulux * chip->ucalibscale / ISL29033_MICRO; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int isl29033_read_ir(struct isl29033_chip *chip, int *ir) +{ + int ret; + + ret = isl29033_read_sensor_input(chip); + if (ret < 0) + return ret; + + *ir = ret; + + return IIO_VAL_INT; +} + +static ssize_t isl29033_in_illuminance_scale_available + (struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct isl29033_chip *chip = iio_priv(indio_dev); + unsigned int i; + int len = 0; + + mutex_lock(&chip->lock); + for (i = 0; i < ARRAY_SIZE(isl29033_scales[chip->int_time]); ++i) + len += sprintf(buf + len, "%d.%06d ", + isl29033_rext_normalize(chip, + isl29033_scales[chip->int_time][i].scale), + isl29033_rext_normalize2(chip, + isl29033_scales[chip->int_time][i].scale, + isl29033_scales[chip->int_time][i].uscale)); + mutex_unlock(&chip->lock); + + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t isl29033_in_illuminance_integration_time_available + (struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct isl29033_chip *chip = iio_priv(indio_dev); + unsigned int i; + int len = 0; + + for (i = 0; i < ARRAY_SIZE(isl29033_int_utimes); ++i) + len += sprintf(buf + len, "0.%06d ", + isl29033_int_utimes[i] + * chip->rext / ISL29033_REF_REXT); + + buf[len - 1] = '\n'; + + return len; +} + +static int isl29033_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct isl29033_chip *chip = iio_priv(indio_dev); + int ret = -EINVAL; + + mutex_lock(&chip->lock); + if (chip->suspended) { + ret = -EBUSY; + goto write_done; + } + switch (mask) { + case IIO_CHAN_INFO_CALIBSCALE: + if (chan->type == IIO_LIGHT) { + chip->calibscale = val; + chip->ucalibscale = val2; + ret = 0; + } + break; + case IIO_CHAN_INFO_INT_TIME: + if (chan->type == IIO_LIGHT && !val) + ret = isl29033_set_integration_time(chip, val2); + break; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_LIGHT) + ret = isl29033_set_scale(chip, val, val2); + break; + case IIO_CHAN_INFO_ENABLE: + if (val) + switch (chan->type) { + case IIO_LIGHT: + chip->opmode = ISL29033_CMD1_OPMODE_ALS_CONT; + break; + case IIO_INTENSITY: + chip->opmode = ISL29033_CMD1_OPMODE_IR_CONT; + break; + default: + chip->opmode = ISL29033_CMD1_OPMODE_POWER_DOWN; + break; + } + else + chip->opmode = ISL29033_CMD1_OPMODE_POWER_DOWN; + ret = isl29033_set_mode(chip, chip->opmode); + if (ret != 0) + chip->opmode = ISL29033_CMD1_OPMODE_POWER_DOWN; + break; + default: + break; + } + +write_done: + mutex_unlock(&chip->lock); + + return ret; +} + +static int isl29033_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + int ret = -EINVAL; + struct isl29033_chip *chip = iio_priv(indio_dev); + + mutex_lock(&chip->lock); + if (chip->suspended) { + ret = -EBUSY; + goto read_done; + } + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chip->opmode != ISL29033_CMD1_OPMODE_IR_CONT) + ret = -EBUSY; + else + ret = isl29033_read_ir(chip, val); + break; + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_LIGHT: + if (chip->opmode != ISL29033_CMD1_OPMODE_ALS_CONT) + ret = -EBUSY; + else + ret = isl29033_read_lux(chip, val, val2); + break; + case IIO_INTENSITY: + if (chip->opmode != ISL29033_CMD1_OPMODE_IR_CONT) + ret = -EBUSY; + else + ret = isl29033_read_ir(chip, val); + break; + default: + break; + } + break; + case IIO_CHAN_INFO_INT_TIME: + if (chan->type == IIO_LIGHT) { + *val = 0; + *val2 = isl29033_int_utimes[chip->int_time] + * chip->rext / ISL29033_REF_REXT; + ret = IIO_VAL_INT_PLUS_MICRO; + } + break; + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_LIGHT) { + *val = isl29033_rext_normalize(chip, chip->scale.scale); + *val2 = isl29033_rext_normalize2(chip, + chip->scale.scale, chip->scale.uscale); + ret = IIO_VAL_INT_PLUS_MICRO; + } + break; + case IIO_CHAN_INFO_CALIBSCALE: + if (chan->type == IIO_LIGHT) { + *val = chip->calibscale; + *val2 = chip->ucalibscale; + ret = IIO_VAL_INT_PLUS_MICRO; + } + break; + case IIO_CHAN_INFO_ENABLE: + switch (chan->type) { + case IIO_LIGHT: + *val = chip->opmode == ISL29033_CMD1_OPMODE_ALS_CONT; + break; + case IIO_INTENSITY: + *val = chip->opmode == ISL29033_CMD1_OPMODE_IR_CONT; + break; + default: + break; + } + ret = IIO_VAL_INT; + break; + + default: + break; + } + +read_done: + mutex_unlock(&chip->lock); + + return ret; +} + +#define ISL29033_LIGHT_CHANNEL { \ + .type = IIO_LIGHT, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | \ + BIT(IIO_CHAN_INFO_CALIBSCALE) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_INT_TIME) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ +} + +#define ISL29033_IR_CHANNEL { \ + .type = IIO_INTENSITY, \ + .modified = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_ENABLE), \ + .channel2 = IIO_MOD_LIGHT_IR, \ +} + +static const struct iio_chan_spec isl29033_channels[] = { + ISL29033_LIGHT_CHANNEL, + ISL29033_IR_CHANNEL, +}; + +static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, 0444, + isl29033_in_illuminance_integration_time_available, NULL, 0); +static IIO_DEVICE_ATTR(in_illuminance_scale_available, 0444, + isl29033_in_illuminance_scale_available, NULL, 0); + +#define ISL29033_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr) + +static struct attribute *isl29033_attributes[] = { + ISL29033_DEV_ATTR(in_illuminance_scale_available), + ISL29033_DEV_ATTR(in_illuminance_integration_time_available), + NULL +}; + +static const struct attribute_group isl29033_group = { + .attrs = isl29033_attributes, +}; + +static int isl29033_chip_init(struct isl29033_chip *chip) +{ + int ret; + struct device *dev = regmap_get_device(chip->regmap); + + + /* + * Code added per Intersil Application Note 1534: + * When VDD sinks to approximately 1.8V or below, some of + * the part's registers may change their state. When VDD + * recovers to 2.25V (or greater), the part may thus be in an + * unknown mode of operation. The user can return the part to + * a known mode of operation either by (a) setting VDD = 0V for + * 1 second or more and then powering back up with a slew rate + * of 0.5V/ms or greater, or (b) via I2C disable all ALS/PROX + * conversions, clear the test registers, and then rewrite all + * registers to the desired values. + * ... + * For ISL29033, etc. + * 1. Write 0x00 to register 0x08 (TEST) + * 2. Write 0x00 to register 0x00 (CMD1) + * 3. Rewrite all registers to the desired values + */ + ret = regmap_write(chip->regmap, ISL29033_REG_TEST, 0x0); + if (ret < 0) { + dev_err(dev, "Failed to clear isl29033 TEST reg with err %d\n", + ret); + return ret; + } + + /* + * See Intersil AN1534 comments above. + * "Operating Mode" (COMMAND1) register is reprogrammed when + * data is read from the device. + */ + ret = regmap_write(chip->regmap, ISL29033_REG_ADD_COMMAND1, 0); + if (ret < 0) { + dev_err(dev, "Failed to clear isl29033 CMD1 reg with err %d\n", + ret); + return ret; + } + + usleep_range(1000, 2000); /* per data sheet, page 10 */ + + /* Set defaults */ + ret = isl29033_set_scale(chip, + isl29033_rext_normalize(chip, chip->scale.scale), + isl29033_rext_normalize2(chip, chip->scale.scale, + chip->scale.uscale)); + if (ret < 0) { + dev_err(dev, + "Init of isl29033 fails (scale) with err %d\n", ret); + return ret; + } + + ret = isl29033_set_integration_time(chip, + isl29033_int_utimes[chip->int_time] + * chip->rext / ISL29033_REF_REXT); + if (ret < 0) + dev_err(dev, + "Init of isl29033 fails (integration) with err %d\n", + ret); + + return ret; +} + +static const struct iio_info isl29033_info = { + .attrs = &isl29033_group, + .read_raw = isl29033_read_raw, + .write_raw = isl29033_write_raw, +}; + +static bool isl29033_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL29033_REG_ADD_DATA_LSB: + case ISL29033_REG_ADD_DATA_MSB: + case ISL29033_REG_ADD_COMMAND1: + case ISL29033_REG_ADD_COMMAND2: + case ISL29033_REG_TEST: + return true; + default: + return false; + } +} + +static const struct regmap_config isl29033_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = isl29033_is_volatile_reg, + .max_register = ISL29033_REG_TEST, + .num_reg_defaults_raw = ISL29033_REG_TEST + 1, + .cache_type = REGCACHE_RBTREE, +}; + +struct isl29033_chip_info { + const struct iio_chan_spec *channels; + int num_channels; + const struct iio_info *info; + const struct regmap_config *regmap_cfg; +}; + +static const char *isl29033_match_acpi_device(struct device *dev, int *data) +{ + const struct acpi_device_id *id; + + id = acpi_match_device(dev->driver->acpi_match_table, dev); + + if (!id) + return NULL; + + *data = (int)id->driver_data; + + return dev_name(dev); +} + +static int isl29033_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct isl29033_chip *chip; + struct iio_dev *indio_dev; + int ret; + const char *name = NULL; + int dev_id = 0; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); + if (!indio_dev) + return -ENOMEM; + + chip = iio_priv(indio_dev); + + i2c_set_clientdata(client, indio_dev); + + if (id) { + name = id->name; + dev_id = id->driver_data; + } + + if (ACPI_HANDLE(&client->dev)) + name = isl29033_match_acpi_device(&client->dev, &dev_id); + + mutex_init(&chip->lock); + + chip->calibscale = 1; + chip->ucalibscale = 0; + chip->int_time = ISL29033_INT_TIME_16; + chip->scale = isl29033_scales[chip->int_time][0]; + chip->suspended = false; + +#ifdef CONFIG_OF + ret = device_property_read_u32(&client->dev, "rext", &chip->rext); + if (ret != 0) + chip->rext = ISL29033_REF_REXT; +#else + chip->rext = ISL29033_REF_REXT; +#endif /* CONFIG_OF */ + + chip->regmap = devm_regmap_init_i2c(client, &isl29033_regmap_config); + + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "regmap initialization fails with err %d\n", ret); + return ret; + } + + ret = isl29033_chip_init(chip); + if (ret) + return ret; + + indio_dev->info = &isl29033_info; + indio_dev->channels = isl29033_channels; + indio_dev->num_channels = ARRAY_SIZE(isl29033_channels); + indio_dev->name = name; + indio_dev->dev.parent = &client->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static int __maybe_unused isl29033_suspend(struct device *dev) +{ + struct isl29033_chip *chip = iio_priv(dev_get_drvdata(dev)); + int ret; + + mutex_lock(&chip->lock); + + ret = isl29033_set_mode(chip, ISL29033_CMD1_OPMODE_POWER_DOWN); + if (ret == 0) + chip->suspended = true; + + mutex_unlock(&chip->lock); + + return ret; +} + +static int __maybe_unused isl29033_resume(struct device *dev) +{ + struct isl29033_chip *chip = iio_priv(dev_get_drvdata(dev)); + int ret; + + mutex_lock(&chip->lock); + + ret = isl29033_chip_init(chip); + if (!ret) + chip->suspended = false; + + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct dev_pm_ops isl29033_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(isl29033_suspend, isl29033_resume) +}; + +static const struct acpi_device_id isl29033_acpi_match[] = { + {"ISL29033", 0}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, isl29033_acpi_match); + +static const struct i2c_device_id isl29033_id[] = { + {"isl29033", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, isl29033_id); + +static const struct of_device_id isl29033_of_match[] = { + { .compatible = "isil,isl29033", }, + { }, +}; +MODULE_DEVICE_TABLE(of, isl29033_of_match); + +static struct i2c_driver isl29033_driver = { + .driver = { + .name = "isl29033", + .acpi_match_table = ACPI_PTR(isl29033_acpi_match), + .pm = &isl29033_dev_pm_ops, + .of_match_table = isl29033_of_match, + }, + .probe = isl29033_probe, + .id_table = isl29033_id, +}; +module_i2c_driver(isl29033_driver); + +MODULE_DESCRIPTION("ISL29033 Ambient Light Sensor driver"); +MODULE_LICENSE("GPL"); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
