Hello Peter, Do you have any progress that could be shared for si1153? Even if it's not complete I could use it to begin si1133. Thanks, Maxime. >Excellent news. I'll keep a watch for this new driver to show up. >In the meantime, we just got the sensor to respond correctly using >i2cget|set commands. > >FYI, the issue we had was that the reset value of ADCCONFIGx is not 0x00 >(as specified by the datasheet), but 0x0f, which selected no photodiode. >Hence, we received only noise values. > >Thanks a lot and have a good day > >-- > >Olivier Dugas > >On 17-06-19 11:10 AM, Peter Meerwald-Stadler wrote: >> Hello Olivier, >> >>> We've recently been trying to make the SI1133 light sensor work according to >>> what's written in its datasheet. Unfortunately many questions remain and the >>> si1145.c driver seems largely different from si1133. We believe that any code >>> sample would be of a great help. Are you aware of any driver, unmerged patch >>> or other code sample for this sensor? >> the si1133 belongs in the same family as the si1153 which has a different >> register layout than the previous chips, so I think a separate driver is >> needed >> >> I do have an eval board for the si1153 and started a driver, but it's not >> ready for submission (yet), the si1133 should be a lot simpler than the >> si1153 >> >> regards, p. >> > >-- >To unsubscribe from this list: send the line "unsubscribe linux-iio" in >the body of a message to majordomo@xxxxxxxxxxxxxxx >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html