The AD5691R/AD5692R/AD5693/AD5693R are a family of one channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices have either no built-in reference, or built-in 2.5V reference. These devices are pretty similar to AD5671R/AD5675R and AD5694/AD5694R/AD5695R/AD5696/AD5696R, except that they have one channel. Another difference is that they use a write control register(addr 0x04) for setting the power down modes and the internal reference instead of separate registers for each function. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5693R_5692R_5691R_5693.pdf Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> --- drivers/iio/dac/ad5686.c | 88 +++++++++++++++++++++++++++++++++++++++++--- drivers/iio/dac/ad5686.h | 16 ++++++++ drivers/iio/dac/ad5696-i2c.c | 7 +++- 3 files changed, 104 insertions(+), 7 deletions(-) diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index 89c5f08..be803e8 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -70,6 +70,8 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, bool readin; int ret; struct ad5686_state *st = iio_priv(indio_dev); + unsigned int val, ref_bit_msk = 0; + u8 shift = 0; ret = strtobool(buf, &readin); if (ret) @@ -80,9 +82,22 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, else st->pwr_down_mask &= ~(0x3 << (chan->channel * 2)); - ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, 0, - st->pwr_down_mask & st->pwr_down_mode); + switch (st->chip_info->regmap_type) { + case AD5686_REGMAP: + shift = 0; + ref_bit_msk = 0; + break; + case AD5693_REGMAP: + shift = 13; + ref_bit_msk = AD5693_REF_BIT_MSK; + break; + } + val = ((st->pwr_down_mask & st->pwr_down_mode) << shift); + if (!st->use_internal_vref) + val |= ref_bit_msk; + + ret = st->write(st, AD5686_CMD_POWERDOWN_DAC, 0, val); return ret ? ret : len; } @@ -175,6 +190,11 @@ static const struct iio_chan_spec_ext_info ad5686_ext_info[] = { .ext_info = ad5686_ext_info, \ } +#define DECLARE_AD5693_CHANNELS(name, bits, _shift) \ +static struct iio_chan_spec name[] = { \ + AD5868_CHANNEL(0, 0, bits, _shift), \ +} + #define DECLARE_AD5686_CHANNELS(name, bits, _shift) \ static struct iio_chan_spec name[] = { \ AD5868_CHANNEL(0, 1, bits, _shift), \ @@ -200,72 +220,112 @@ DECLARE_AD5676_CHANNELS(ad5676_channels, 16, 0); DECLARE_AD5686_CHANNELS(ad5684_channels, 12, 4); DECLARE_AD5686_CHANNELS(ad5685r_channels, 14, 2); DECLARE_AD5686_CHANNELS(ad5686_channels, 16, 0); +DECLARE_AD5693_CHANNELS(ad5693_channels, 16, 0); +DECLARE_AD5693_CHANNELS(ad5692r_channels, 14, 2); +DECLARE_AD5693_CHANNELS(ad5691r_channels, 12, 4); static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { [ID_AD5671R] = { .channels = ad5672_channels, .int_vref_mv = 2500, .num_channels = 8, + .regmap_type = AD5686_REGMAP, }, [ID_AD5672R] = { .channels = ad5672_channels, .int_vref_mv = 2500, .num_channels = 8, + .regmap_type = AD5686_REGMAP, }, [ID_AD5675R] = { .channels = ad5676_channels, .int_vref_mv = 2500, .num_channels = 8, + .regmap_type = AD5686_REGMAP, }, [ID_AD5676] = { .channels = ad5676_channels, .num_channels = 8, + .regmap_type = AD5686_REGMAP, }, [ID_AD5676R] = { .channels = ad5676_channels, .int_vref_mv = 2500, .num_channels = 8, + .regmap_type = AD5686_REGMAP, }, [ID_AD5684] = { .channels = ad5684_channels, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5684R] = { .channels = ad5684_channels, .int_vref_mv = 2500, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5685R] = { .channels = ad5685r_channels, .int_vref_mv = 2500, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5686] = { .channels = ad5686_channels, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5686R] = { .channels = ad5686_channels, .int_vref_mv = 2500, .num_channels = 4, + .regmap_type = AD5686_REGMAP, + }, + [ID_AD5691R] = { + .channels = ad5691r_channels, + .int_vref_mv = 2500, + .num_channels = 1, + .regmap_type = AD5693_REGMAP, + }, + [ID_AD5692R] = { + .channels = ad5692r_channels, + .int_vref_mv = 2500, + .num_channels = 1, + .regmap_type = AD5693_REGMAP, + }, + [ID_AD5693] = { + .channels = ad5693_channels, + .num_channels = 1, + .regmap_type = AD5693_REGMAP, + }, + [ID_AD5693R] = { + .channels = ad5693_channels, + .int_vref_mv = 2500, + .num_channels = 1, + .regmap_type = AD5693_REGMAP, }, [ID_AD5694] = { .channels = ad5684_channels, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5694R] = { .channels = ad5684_channels, .int_vref_mv = 2500, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5696] = { .channels = ad5686_channels, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, [ID_AD5696R] = { .channels = ad5686_channels, .int_vref_mv = 2500, .num_channels = 4, + .regmap_type = AD5686_REGMAP, }, }; @@ -276,7 +336,9 @@ int ad5686_probe(struct device *dev, { struct ad5686_state *st; struct iio_dev *indio_dev; - int ret, voltage_uv = 0; + unsigned int val, ref_bit_msk = 0; + u8 cmd = 0; + int ret, i, voltage_uv = 0; indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (indio_dev == NULL) @@ -310,7 +372,8 @@ int ad5686_probe(struct device *dev, st->vref_mv = st->chip_info->int_vref_mv; /* Set all the power down mode for all channels to 1K pulldown */ - st->pwr_down_mode = 0x55; + for (i = 0; i < st->chip_info->num_channels; i++) + st->pwr_down_mode |= (0x01 << (i * 2)); indio_dev->dev.parent = dev; indio_dev->name = name; @@ -319,8 +382,21 @@ int ad5686_probe(struct device *dev, indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; - ret = st->write(st, AD5686_CMD_INTERNAL_REFER_SETUP, - 0, !!voltage_uv); + switch (st->chip_info->regmap_type) { + case AD5686_REGMAP: + cmd = AD5686_CMD_INTERNAL_REFER_SETUP; + ref_bit_msk = 0; + break; + case AD5693_REGMAP: + cmd = AD5686_CMD_CONTROL_REG; + ref_bit_msk = AD5693_REF_BIT_MSK; + st->use_internal_vref = !voltage_uv; + break; + } + + val = (voltage_uv | ref_bit_msk); + + ret = st->write(st, cmd, 0, !!val); if (ret) goto error_disable_reg; diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h index 05f0ce9..6c6879d 100644 --- a/drivers/iio/dac/ad5686.h +++ b/drivers/iio/dac/ad5686.h @@ -35,6 +35,9 @@ #define AD5686_LDAC_PWRDN_100K 0x2 #define AD5686_LDAC_PWRDN_3STATE 0x3 +#define AD5686_CMD_CONTROL_REG 0x4 +#define AD5693_REF_BIT_MSK BIT(12) + /** * ad5686_supported_device_ids: */ @@ -49,6 +52,10 @@ enum ad5686_supported_device_ids { ID_AD5685R, ID_AD5686, ID_AD5686R, + ID_AD5691R, + ID_AD5692R, + ID_AD5693, + ID_AD5693R, ID_AD5694, ID_AD5694R, ID_AD5695R, @@ -56,6 +63,11 @@ enum ad5686_supported_device_ids { ID_AD5696R, }; +enum ad5686_regmap_type { + AD5686_REGMAP, + AD5693_REGMAP +}; + struct ad5686_state; typedef int (*ad5686_write_func)(struct ad5686_state *st, @@ -68,12 +80,14 @@ typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr); * @int_vref_mv: AD5620/40/60: the internal reference voltage * @num_channels: number of channels * @channel: channel specification + * @regmap_type: register map layout variant */ struct ad5686_chip_info { u16 int_vref_mv; unsigned int num_channels; struct iio_chan_spec *channels; + enum ad5686_regmap_type regmap_type; }; /** @@ -84,6 +98,7 @@ struct ad5686_chip_info { * @vref_mv: actual reference voltage used * @pwr_down_mask: power down mask * @pwr_down_mode: current power down mode + * @use_internal_vref: set to true if the internal reference voltage is used * @data: spi transfer buffers */ @@ -96,6 +111,7 @@ struct ad5686_state { unsigned int pwr_down_mode; ad5686_write_func write; ad5686_read_func read; + bool use_internal_vref; /* * DMA (thus cache coherency maintenance) requires the diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c index 275e032..d18735d 100644 --- a/drivers/iio/dac/ad5696-i2c.c +++ b/drivers/iio/dac/ad5696-i2c.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696, AD5696R + * AD5671R, AD5675R, AD5691R, AD5692R, AD5693, AD5693R, + * AD5694, AD5694R, AD5695R, AD5696, AD5696R * Digital to analog converters driver * * Copyright 2018 Analog Devices Inc. @@ -72,6 +73,10 @@ static int ad5686_i2c_remove(struct i2c_client *i2c) static const struct i2c_device_id ad5686_i2c_id[] = { {"ad5671r", ID_AD5671R}, {"ad5675r", ID_AD5675R}, + {"ad5691r", ID_AD5691R}, + {"ad5692r", ID_AD5692R}, + {"ad5693", ID_AD5693}, + {"ad5693r", ID_AD5693R}, {"ad5694", ID_AD5694}, {"ad5694r", ID_AD5694R}, {"ad5695r", ID_AD5695R}, -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
