[PATCH v2 2/4] iio: accel: adxl345: use scan_index for accessing accel registers

[Akinobu Mita <akinobu.mita@xxxxxxxxx>]

Currently the address field in iio_chan_spec is filled with an accel
data register address for the corresponding axis.

In preparation for adding calibration offset support, this makes use of
scan_index field to access accel data registers instead of using address
field.  This change makes it easier to access both accel registers and
calibration offset registers with fewer lines of code as these are
located in X-axis, Y-axis, Z-axis order.

Cc: Eva Rachel Retuya <eraretuya@xxxxxxxxx>
Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
* v2
- No changes from v1

 drivers/iio/accel/adxl345_core.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 8e0d56b..6b62f82 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -49,19 +49,19 @@ struct adxl345_data {
 	u8 data_range;
 };
 
-#define ADXL345_CHANNEL(reg, axis) {					\
+#define ADXL345_CHANNEL(si, axis) {					\
 	.type = IIO_ACCEL,						\
 	.modified = 1,							\
 	.channel2 = IIO_MOD_##axis,					\
-	.address = reg,							\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.scan_index = si,						\
 }
 
 static const struct iio_chan_spec adxl345_channels[] = {
-	ADXL345_CHANNEL(ADXL345_REG_DATAX0, X),
-	ADXL345_CHANNEL(ADXL345_REG_DATAY0, Y),
-	ADXL345_CHANNEL(ADXL345_REG_DATAZ0, Z),
+	ADXL345_CHANNEL(0, X),
+	ADXL345_CHANNEL(1, Y),
+	ADXL345_CHANNEL(2, Z),
 };
 
 static int adxl345_read_raw(struct iio_dev *indio_dev,
@@ -79,8 +79,9 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
 		 * ADXL345_REG_DATA(X0/Y0/Z0) contain the least significant byte
 		 * and ADXL345_REG_DATA(X0/Y0/Z0) + 1 the most significant byte
 		 */
-		ret = regmap_bulk_read(data->regmap, chan->address, &regval,
-				       sizeof(regval));
+		ret = regmap_bulk_read(data->regmap, ADXL345_REG_DATAX0 +
+				       sizeof(regval) * chan->scan_index,
+				       &regval, sizeof(regval));
 		if (ret < 0)
 			return ret;
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html