Linux IIO Development

• Thread Index

• [RFC PATCH 4/7] iio:ABI docs: Fix issue around repeated definition of out_currentY_raw
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 1/7] iio:ABI docs: Fix up duplicate *_calibbias_* documentation for icm42600
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 0/7] IIO ABI documentation duplication fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 3/7] iio:ABI docs: Drop device specific docs for _powerdown for the adf4371
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC PATCH 2/7] iio:ABI docs: Avoid repitition of triggerX/sampling_frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: Remove redundant null check before clk_disable_unprepare
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
  • From: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
• Re: [PATCH v2 0/6] iio:pressure:ms5637: add ms5803 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: fix erroneous handling of spurious IRQs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v6 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v6 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PULL] 1st set of IIO and counter fixes for the 5.11 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] 1st set of IIO and counter fixes for the 5.11 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: trivial-devices: reorder memsic devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/1] time64.h: Consolidated PSEC_PER_SEC definition
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v1 1/1] time64.h: Consolidated PSEC_PER_SEC definition
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 23/24] dt-bindings:iio:adc: update adc.yaml reference
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 18/24] include/linux/iio/dac/mcp4725.h: update a microchip,mcp4725.yaml ref
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH 1/2] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
  • From: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
• [PATCH 0/2] Allow VADC_LR_MUX2_BAT_ID channel proper reading
  • From: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
• [PATCH 00/24] Fix broken file docs cross-references
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 18/24] include/linux/iio/dac/mcp4725.h: update a microchip,mcp4725.yaml ref
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 23/24] dt-bindings:iio:adc: update adc.yaml reference
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v5] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] time64.h: Consolidated PSEC_PER_SEC definition
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v1 1/1] time64.h: Consolidated PSEC_PER_SEC definition
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: fix erroneous handling of spurious IRQs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v5] iio: hrtimer: Allow sub Hz granularity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 0/2] Add support for ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v3 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v5] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] - AMD Sensor Fusion Hub refactored driver with module parameters
  • From: Richard Neumann <mail@xxxxxxxxxxxxxxxxxx>
• [PATCH v4] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings:iio:health:ti,afe4404: Fix wrong compatible value.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v3 1/3] i2c: use void pointers for supplying data for reads and writes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] Use void pointers instead of char in I2C transfer APIs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v3 0/6] add timestamp channel for hid-sensors
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• [PATCH v2 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 4/6] iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 2/6] iio:pressure:ms5637: introduce hardware differentiation
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: trivial-devices: reorder memsic devices
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 0/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st-sensors: Update ST Sensor bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8] iio: Handle enumerated properties with gaps
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/6] Add timestamp channel for hid-sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] add timestamp channel for hid-sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8] iio: Handle enumerated properties with gaps
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/3] add custom hinge sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 2/2] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v5 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v5 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v8] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v7 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v7 2/2] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v7 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH v7 1/5] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v7 1/5] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Reply to [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add support for ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v2 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: <tomislav.denis@xxxxxxx>
• [PATCH v2 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: <tomislav.denis@xxxxxxx>
• Re: [PATCH] dt-bindings: Add missing array size constraints
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• [PATCH 6/6] iio: hid-sensor-rotation: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 5/6] iio: hid-sensor-incl-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 4/6] iio: hid-sensor-magn-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 3/6] iio: hid-sensor-als: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 2/6] iio: hid-sensor-gyro-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 1/6] iio: hid-sensor-accel-3d: Add timestamp channel for gravity sensor
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH 0/6] Add timestamp channel for hid-sensors
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• Re: [PATCH v3 0/6] add timestamp channel for hid-sensors
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH v3 0/6] add timestamp channel for hid-sensors
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v3 6/6] iio: hid-sensor-rotation: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 5/6] iio: hid-sensor-incl-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 2/6] iio: hid-sensor-gyro-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 3/6] iio: hid-sensor-als: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 4/6] iio: hid-sensor-magn-3d: Add timestamp channel
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 1/6] iio: hid-sensor-accel-3d: Add timestamp channel for gravity sensor
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 0/6] add timestamp channel for hid-sensors
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH] dt-bindings: Add missing array size constraints
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/8] Documentation: HID: edit/correct all files
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v4 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH] iio: st-sensors: Update ST Sensor bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: Add basic unit test for iio_format_value()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: "Denis, Tomislav AVL DiTEST" <Tomislav.Denis@xxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: Remove redundant null check before clk_disable_unprepare
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• Re: [PATCH v4 0/3] add custom hinge sensor support
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH v7 0/5] Introduce the Counter character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/5] counter: Internalize sysfs interface code
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/5] counter: Add character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 4/5] docs: counter: Document character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v7 5/5] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v7 5/5] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/5] counter: Add character device interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/5] docs: counter: Document character device interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/5] docs: counter: Update to reflect sysfs internalization
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] dt-bindings:iio:health:ti,afe4404: Fix wrong compatible value.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/46] dt-bindings:iio:health:ti,afe4404: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/3] add custom hinge sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad5504: Fix setting power-down state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] counter:ti-eqep: remove floor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] hid/hid-sensor-custom: convert comma to semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: Add basic unit test for iio_format_value()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings:iio:dac:microchip,mcp4725: fix properties for mcp4726
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V3] iio: adc: ad7476: Add LTC2314-14 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/8] iio: Set default trigger device parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: acpi_als: Add sotfware trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: frequency: adf4350: Remove redundant null check before clk_disable_unprepare
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ab8500-gpadc: Support non-hw-conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sc27xx_adc: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v6] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: vl6180: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/8] Documentation: HID: edit/correct all files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 1/3] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 3/3] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 2/3] iio: acpi_als: Add local variable dev in probe
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 0/3] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 3/8] Documentation: HID: hiddev editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 0/8] Documentation: HID: edit/correct all files
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 1/8] Documentation: HID: hid-alps editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 5/8] Documentation: HID: hidraw editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 4/8] Documentation: HID: intel-ish-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 6/8] Documentation: HID: hid-sensor editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 7/8] Documentation: HID: hid-transport editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 8/8] Documentation: HID: uhid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] iio: vl6180: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• [PATCH 3/3] iio: tsl2583: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/3] iio: vl6180: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/3] iio: bme680: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• [PATCH v7 5/5] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v7 4/5] docs: counter: Document character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v7 3/5] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v7 2/5] docs: counter: Update to reflect sysfs internalization
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v7 0/5] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 3/5] counter: Add character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 2/2 v6] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v6] iio: accel: yamaha-yas530: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RFC PATCH v2 1/1] iio/scmi: Adding support for IIO SCMI Based Sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• [RFC PATCH v2 0/1] Adding support for IIO SCMI based sensors
  • From: Jyoti Bhayana <jbhayana@xxxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• Re: [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• [PATCH] iio: adc: ab8500-gpadc: Fix off by 10 to 3
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Chris Lesiak <chris.lesiak@xxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: sc27xx_adc: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Chunyan Zhang <zhang.lyra@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 083/130] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] iio: sc27xx_adc: Use DIV_ROUND_CLOSEST() instead of open-coding it
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 2/2] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v6 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v5 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v5 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v5 2/2] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v5 1/2] lib/string.c: add __sysfs_match_string_with_gaps() helper
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v4] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] dt-bindings: Drop unnecessary *-supply schemas properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings:iio:dac:microchip,mcp4725: fix properties for mcp4726
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4] iio: Handle enumerated properties with gaps
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 1/5] counter: Internalize sysfs interface code
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/5] Introduce the Counter character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH v4] iio: Handle enumerated properties with gaps
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: device tree binding for iio-trig-hrtimer
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC PATCH 0/5] iio: move 'modes' initialization to core
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• device tree binding for iio-trig-hrtimer
  • From: yarl-baudig@xxxxxxxxxx
• Re: [PATCH v6 1/5] counter: Internalize sysfs interface code
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH v6 0/5] Introduce the Counter character device interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH] iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver
  • From: Max Leiter <maxwell.leiter@xxxxxxxxx>
• [PATCH] hwmon: (ntc_thermistor): try reading processed
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: adc: ab8500-gpadc: Support non-hw-conversion
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 08/46] dt-bindings:iio:health:ti,afe4404: txt to yaml conversion
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v4 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v4 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH] iio: frequency: adf4350: Remove redundant null check before clk_disable_unprepare
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
  • From: Xu Wang <vulab@xxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v5 2/3] iio: acpi_als: Add local variable dev in probe
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/3] iio: acpi_als: Add timestamp channel
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 3/3] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 2/3] iio: acpi_als: Add local variable dev in probe
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 1/3] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 0/3] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] iio: acpi_als: Add timestamp channel
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 2/3] iio: acpi_als: Add local variable dev in probe
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/1] Add delay after the addressed reset command in mlx90632.c
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/3] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• [PATCH v5 0/1] Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] dt-bindings:iio:dac:microchip,mcp4725: fix properties for mcp4726
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• [PATCH V3] iio: adc: ad7476: Add LTC2314-14 support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH V2] iio: adc: ad7476: Add LTC2314-14 support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH V2] iio: adc: ad7476: Add LTC2314-14 support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH] iio: adc: ad7476: Add LTC2314-14 support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v4 2/3] iio: acpi_als: Add local variable dev in probe
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 1/3] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 3/3] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 0/3] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 8/8] iio: Rename iio_trigger_alloc dev argument to parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 0/8] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v4 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/3] iio: iio_format_value(): Fix IIO_VAL_FRACTIONAL_LOG2 values between -1.0 and 0.0
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/3] iio: iio_format_value(): Use signed temporary for IIO_VAL_FRACTIONAL_LOG2
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/3] iio: Add basic unit test for iio_format_value()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: kxcjk1013: Document regulator supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4 0/3] add custom hinge sensor support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v4 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v4 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v4 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v4 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• [PATCH v4 0/1] Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• [PATCH v3 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• [PATCH v3 0/1] Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 1/1] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• [PATCH v2 0/1] Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH -next] hid/hid-sensor-custom: convert comma to semicolon
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH] counter:ti-eqep: remove floor
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH -next] hid/hid-sensor-custom: convert comma to semicolon
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• Re: [PATCH] counter:ti-eqep: remove floor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] iio: ad5504: Fix setting power-down state
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] counter:ti-eqep: remove floor
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/5] counter: Add character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v6 0/5] Introduce the Counter character device interface
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v6 1/5] counter: Internalize sysfs interface code
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• Re: [PATCH 2/6] iio:pressure:ms5637: introduce hardware differentiation
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: kxcjk1013: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: acpi_als: Add timestamp channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: as3935: Remove code to set trigger parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/7] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: accel: kxcjk1013: Add rudimentary regulator support
  • From: devajithvs <devajithvs@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: accel: kxcjk1013: Document regulator supplies
  • From: devajithvs <devajithvs@xxxxxxxxx>
• Re: [PATCH 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio:pressure:ms5637: introduce hardware differentiation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio:pressure:ms5637: switch to probe_new
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad5504: Fix setting power-down state
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: kernel bug tracker
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next] iio: chemical: pms7003: convert comma to semicolon
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] devicetree: Add Xilinx System Management Wizard binding documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 2/2 v5] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/6] iio:pressure:ms5637: switch to probe_new
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH] iio: afe: iio-rescale: Support processed channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v5] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2 v5] iio: accel: yamaha-yas530: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 2/2] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• RE: [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH] drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
  • From: Slaveyko Slaveykov <sis@xxxxxxxxxxx>
• RE: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH -next] iio: chemical: pms7003: convert comma to semicolon
  • From: Zheng Yongjun <zhengyongjun3@xxxxxxxxxx>
• Re: [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 7/7] iio: as3935: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: chemical: atlas: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 5/7] iio: lmp91000: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 4/7] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 3/7] iio: adis_trigger: Remove code to set trigger parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 2/7] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] Input: cyapa - do not call input_device_enabled from power mode handler
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 1/2] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 0/2] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 1/2] iio: acpi_als: Add timestamp channel
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 0/2] iio: acpi_als: Add sotfware trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 7/7] iio: as3935: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 6/7] iio: chemical: atlas: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 5/7] iio: lmp91000: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/7] iio: fix devm_iio_trigger_alloc with parent.cocci
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 1/7] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 4/7] iio: gp2ap020a00f: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 3/7] iio: adis_trigger: Remove code to set trigger parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 0/7] iio: Set default trigger device parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 4/6] iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 3/6] iio:pressure:ms5637: limit available sample frequencies
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 5/6] iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 2/6] iio:pressure:ms5637: introduce hardware differentiation
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 6/6] iio:pressure:ms5637: add ms5803 support
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 1/6] iio:pressure:ms5637: switch to probe_new
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: kernel bug tracker
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: kernel bug tracker
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• kernel bug tracker
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio: core: register chardev only if needed
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] iio: ad5504: Fix setting power-down state
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: IIO Driver for TMP117 Temperature sensor
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: set default trig->dev.parent
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH] iio: set default trig->dev.parent
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 03/10] dt-bindings:iio:adc:remove atmel, adc-res and atmel, adc-res-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings:i2c:i2c-gate: txt to yaml conversion
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• IIO Driver for TMP117 Temperature sensor
  • From: Puranjay Mohan <puranjay12@xxxxxxxxx>
• [PATCH v3] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• RE: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: "Pop, Cristian" <Cristian.Pop@xxxxxxxxxx>
• [PATCH v3 3/3] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v3 2/3] Documentation/ABI/testing: Add documentation for AD5766 new ABI
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: (subset) [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: adc: ad7887: add binding doc for AD7887
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] iio: accel: yamaha-yas: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: "lorenzo.bianconi@xxxxxxxxxx" <lorenzo.bianconi@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: "Ye, Xiang" <xiang.ye@xxxxxxxxx>
• Re: [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] Documentation: HID: intel-ish-hid editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/8] Documentation: HID: hiddev editing & corrections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 0/5] iio: move 'modes' initialization to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: acpi_als: Add trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: acpi_als: Add trigger support
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH] iio: hrtimer: Allow sub Hz granularity
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: dac: ad5766: add driver support for AD5766
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Cristian Pop <cristian.pop@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: add custom hinge sensor support
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 8/8] Documentation: HID: uhid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 7/8] Documentation: HID: hid-transport editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 6/8] Documentation: HID: hid-sensor editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 5/8] Documentation: HID: hidraw editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 4/8] Documentation: HID: intel-ish-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 3/8] Documentation: HID: hiddev editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 2/8] Documentation: HID: amd-sfh-hid editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 1/8] Documentation: HID: hid-alps editing & corrections
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 0/8] Documentation: HID: edit/correct all files
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v10 15/15] arm64: dts: qrb5165-rb5: port thermal zone definitions
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 14/15] arm64: dts: sm8250-mtp: add thermal zones using pmic's adc-tm5
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 13/15] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 12/15] thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 11/15] iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 10/15] iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 09/15] iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 07/15] iio: provide of_iio_channel_get_by_name() and devm_ version it
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 08/15] iio: adc: move vadc_map_pt from header to the source file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 06/15] iio: adc: qcom-spmi-adc5: use of_device_get_match_data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 04/15] iio: adc: qcom-vadc-common: use fixp_linear_interpolate
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 05/15] iio: adc: move qcom-vadc-common.h to include dir
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 03/15] iio: adc: qcom-vadc: move several adc5 functions to common file
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 01/15] dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 02/15] fixp-arith: add a linear interpolation function
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v10 00/15] qcom: pm8150: add support for thermal monitoring
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL V2] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 4/5] iio: adc: ad7768-1: remove explicit modes initialization
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 5/5] iio: magnetometer: rm3100: remove explicit modes initialization
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 0/5] iio: move 'modes' initialization to core
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 3/5] iio: remove modes init for INDIO_DIRECT_MODE only drivers (manual)
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [RFC PATCH 1/5] iio: core: initialize 'modes' to INDIO_DIRECT_MODE by default
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: core: split __iio_device_attr_init() to init only the attr object
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] iio: core: register chardev only if needed
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3] iio: dummy: use devm_iio_triggered_buffer_setup() for buffer setup
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3] iio: dummy: convert events to device-managed handlers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3] iio: dummy: convert all simple allocation devm_ variants
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v2] Input: document inhibiting
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 7/7] Input: Add "inhibited" property
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 2/7] Input: use input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v4 1/7] Input: add input_device_enabled()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• RE: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• [PATCH v3 3/3] iio:Documentation: Add documentation for hinge sensor channels
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 2/3] iio: hid-sensors: Add hinge sensor driver
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH v3 1/3] HID: hid-sensor-custom: Add custom sensor iio support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• add custom hinge sensor support
  • From: Ye Xiang <xiang.ye@xxxxxxxxx>
• [PATCH] iio: st-sensors: Convert bindings to YAML
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PULL] 2nd set of IIO new device support, cleanups and yaml conversions for the 5.11 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/2] iio: imu: inv_mpu6050: Add support for MPU-6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 2/4] iio: magnetometer: bmc150: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 4/4] iio: gyro: bmg160: Add rudimentary regulator support
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: magnetometer: bmc150: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: gyroscope: bmg160: Document regulator supplies
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH 1/3 v3] iio: accel: bmc150-accel: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/1] iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH] iio: sx9310: Off by one in sx9310_read_thresh()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 000/141] Fix fall-through warnings for Clang
  • From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
• Re: [PATCH 1/2 v4] iio: accel: yamaha-yas530: Add DT bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: mpu3050: Use devm_ to set up buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] bindings: iio: adc: Add documentation for ADS131E0x ADC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: AD5766 yaml documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 3/3] iio: adc: xilinx: use more devres helpers and remove remove()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 2/3] iio: adc: xilinx: use devm_krealloc() instead of kfree() + kcalloc()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 1/3] iio: adc: xilinx: use helper variable for &pdev->dev
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATH v3 0/3] iio: adc: xilinx: use even more devres
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/3] iio: accel: bmc150: Check for a second ACPI device for BOSC0200
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/3] iio: accel: bmc150: Get mount-matrix from ACPI
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/3] iio: accel: bmc150: Removed unused bmc150_accel_dat irq member
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] iio: gyro: mpu3050: Store timestamp in poll function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] iio: gyro: mpu3050: Use devm_ to set up buffer
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v4] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx>
• [PATCH 1/2 v4] iio: accel: yamaha-yas530: Add DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 v4] iio: magnetometer: Add driver for Yamaha YAS530
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v2] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 22/27] iio:adc:ti-adc084s021 Tidy up endian types
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 0/8] IIO: Fused set 1 and 2 of timestamp alignment fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio:trigger: Remove re-poll logic.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: xilinx-xadc: Add basic support for Ultrascale System Monitor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND] [PATCH 1/2] iio: adc: qcom-spmi-vadc: Use right ratiometric range for 8998,660,845
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] add support for LSM6DSOP
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 00/10] iio: adc: at91_adc: cleanup DT bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/10] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2 v2] iio: magnetometer: Add driver for Yamaha YAS5xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOP
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support for LSM6DSOP
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: Add driver for Texas Instruments ADS131E0x ADC family
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/3 v3] iio: accel: bmc150-accel: Add rudimentary regulator support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] iio:core: Introduce unlocked version of iio_map_array_unregister()
  • From: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
• Re: [PATCH 6/9] ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings:iio:samsung,exynos-adc: drop missuse of io-channel-ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 07/46] dt-bindings:iio:health:ti,afe4403: txt to yaml binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings:iio:adc: convert adc.txt to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>