From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: 95c12bba51c3 ("iio: accel: Add buffer mode for Sensortek STK8312")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/accel/stk8312.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/accel/stk8312.c b/drivers/iio/accel/stk8312.c
index 157d8faefb9e..c8b6915a757c 100644
--- a/drivers/iio/accel/stk8312.c
+++ b/drivers/iio/accel/stk8312.c
@@ -103,7 +103,11 @@ struct stk8312_data {
u8 mode;
struct iio_trigger *dready_trig;
bool dready_trigger_on;
- s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 64-bit timestamp */
+ /* Ensure timestamp is naturally aligned */
+ struct {
+ s8 chans[3];
+ s64 timestamp;
+ } scan;
};
static IIO_CONST_ATTR(in_accel_scale_available, STK8312_SCALE_AVAIL);
@@ -438,7 +442,7 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
ret = i2c_smbus_read_i2c_block_data(data->client,
STK8312_REG_XOUT,
STK8312_ALL_CHANNEL_SIZE,
- data->buffer);
+ data->scan.chans);
if (ret < STK8312_ALL_CHANNEL_SIZE) {
dev_err(&data->client->dev, "register read failed\n");
mutex_unlock(&data->lock);
@@ -452,12 +456,12 @@ static irqreturn_t stk8312_trigger_handler(int irq, void *p)
mutex_unlock(&data->lock);
goto err;
}
- data->buffer[i++] = ret;
+ data->scan.chans[i++] = ret;
}
}
mutex_unlock(&data->lock);
- iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
pf->timestamp);
err:
iio_trigger_notify_done(indio_dev->trig);
--
2.31.1
