From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
To make code more readable, use a structure to express the channel
layout and ensure the timestamp is 8 byte aligned.
Found during an audit of all calls of this function.
Fixes: 194dc4c71413 ("iio: accel: Add triggered buffer support for BMA220")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/iio/accel/bma220_spi.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c
index 36fc9876dbca..2802ce1852ef 100644
--- a/drivers/iio/accel/bma220_spi.c
+++ b/drivers/iio/accel/bma220_spi.c
@@ -63,7 +63,11 @@ static const int bma220_scale_table[][2] = {
struct bma220_data {
struct spi_device *spi_device;
struct mutex lock;
- s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 8x8 timestamp */
+ struct {
+ s8 chans[2];
+ /* Ensure timestamp is naturally aligned. */
+ s64 timestamp __aligned(8);
+ } scan;
u8 tx_buf[2] ____cacheline_aligned;
};
@@ -94,12 +98,12 @@ static irqreturn_t bma220_trigger_handler(int irq, void *p)
mutex_lock(&data->lock);
data->tx_buf[0] = BMA220_REG_ACCEL_X | BMA220_READ_MASK;
- ret = spi_write_then_read(spi, data->tx_buf, 1, data->buffer,
+ ret = spi_write_then_read(spi, data->tx_buf, 1, &data->scan.chans,
ARRAY_SIZE(bma220_channels) - 1);
if (ret < 0)
goto err;
- iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
pf->timestamp);
err:
mutex_unlock(&data->lock);
--
2.31.1
