Linux IDE Archive

• Thread Index

• [PATCH v4 0/13] SATA ZPODD support
  • From: Lin Ming
• [PATCH 02/15] ata: Use clk_prepare_enable/clk_disable_unprepare
  • From: Fabio Estevam
• Re: ATA errors corrupt other I/O & set / readonly
  • From: Robert Hancock
• Re: [PATCH 3.3.y] libata: forbid port runtime pm by default, fixing regression
  • From: Greg KH
• [Bug 12290] hda: ide_cd_check_ireason: wrong transfer direction!
  • From: bugzilla-daemon
• [Bug 12290] hda: ide_cd_check_ireason: wrong transfer direction!
  • From: bugzilla-daemon
• Re: [git patches] libata updates for 3.5
  • From: Jeff Garzik
• Re: [git patches] libata updates for 3.5
  • From: Linus Torvalds
• Re: [git patches] libata updates for 3.5
  • From: Jeff Garzik
• Re: [git patches] libata updates for 3.5
  • From: Linus Torvalds
• [git patches] libata updates for 3.5
  • From: Jeff Garzik
• Re: [PATCH] ata, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist
  • From: Jeff Garzik
• Re: [PATCH v3 1/3] PATA host controller driver for ep93xx
  • From: Jeff Garzik
• Re: [PATCH] ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
  • From: Jeff Garzik
• Re: [PATCH V3 1/3] ata: pata_arasan: Add clk_{un}prepare() support
  • From: Jeff Garzik
• Re: [Bug 11133] PIIX4 DMA timeout issue
  • From: Sergei Shtylyov
• [Bug 11133] PIIX4 DMA timeout issue
  • From: bugzilla-daemon
• [Bug 11133] PIIX4 DMA timeout issue
  • From: bugzilla-daemon
• Re: [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• Re: ATA errors corrupt other I/O & set / readonly
  • From: Felix Miata
• [PATCH 3.3.y] libata: forbid port runtime pm by default, fixing regression
  • From: Jonathan Nieder
• Re: ATA errors corrupt other I/O & set / readonly
  • From: Robert Hancock
• Re: [PATCH 1/1] ahci: Detect Marvell 88SE9172 SATA controller
  • From: Matt Johnson
• Re: [libsas PATCH v13] scsi, sd: limit the scope of the async probe domain
  • From: Dan Williams
• Re: [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Morton
• Re: [libsas PATCH v13] scsi, sd: limit the scope of the async probe domain
  • From: James Bottomley
• Re: [libsas PATCH v13] scsi, sd: limit the scope of the async probe domain
  • From: Dan Williams
• Re: [libsas PATCH v13] scsi, sd: limit the scope of the async probe domain
  • From: James Bottomley
• Re: CFA 4.0 patch
  • From: Sergei Shtylyov
• RE: CFA 4.0 patch
  • From: Andre Hedrick (anhedric)
• Re: CFA 4.0 patch
  • From: Sergei Shtylyov
• RE: CFA 4.0 patch
  • From: Andre Hedrick (anhedric)
• Re: CFA 4.0 patch
  • From: Sergei Shtylyov
• CFA 4.0 patch
  • From: Andre Hedrick (anhedric)
• Re: [PATCH] Prevent interface errors with Seagate FreeAgent GoFlex
  • From: Daniel J Blueman
• Re: [RFC]pass pm related information from ata to scsi
  • From: Alan Stern
• [RFC]pass pm related information from ata to scsi
  • From: Aaron Lu
• [Bug 9156] IDE DMA <-> CPU HLT <-> EHCI-HCD
  • From: bugzilla-daemon
• [Bug 9156] IDE DMA <-> CPU HLT <-> EHCI-HCD
  • From: bugzilla-daemon
• [Bug 7735] DriveReady SeekComplete Error every 5 minutes by plextor CD-R/RW 40/12/40A
  • From: bugzilla-daemon
• [Bug 7735] DriveReady SeekComplete Error every 5 minutes by plextor CD-R/RW 40/12/40A
  • From: bugzilla-daemon
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [Bug 17982] Cannot see devices on IDE controller
  • From: bugzilla-daemon
• [Bug 23602] Pata Controller on Asrock X58 Extreme 6 not detected
  • From: bugzilla-daemon
• [Bug 23602] Pata Controller on Asrock X58 Extreme 6 not detected
  • From: bugzilla-daemon
• [Bug 32852] Random timeouts and unsuccessful resets on JMicron JMB393 PMP
  • From: bugzilla-daemon
• [Bug 8567] DMA: Wrong device is disabled
  • From: bugzilla-daemon
• [Bug 8567] DMA: Wrong device is disabled
  • From: bugzilla-daemon
• [Bug 8567] DMA: Wrong device is disabled
  • From: bugzilla-daemon
• Re: [PATCH] ata: Compact Flash/PCMCIA driver for XLR
  • From: Jayachandran C.
• [Bug 6883] ide-probe.c attempts to use polling designed for ancient Seagate drives on some compact flash disks
  • From: bugzilla-daemon
• [Bug 6883] ide-probe.c attempts to use polling designed for ancient Seagate drives on some compact flash disks
  • From: bugzilla-daemon
• [Bug 43211] Pressing the DVD eject button renders the DVD-ROM unusable
  • From: bugzilla-daemon
• Re: [PATCH] ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
  • From: Alan Cox
• [PATCH] ata_generic: Skip is_intel_ider() check when ata_generic=1 is set
  • From: Andi Kleen
• Re: [Bug 42679] New: DMA Read on Marvell 88SE9128 fails when Intel's IOMMU is on
  • From: Andrew Cooks
• On AHCI CCC
  • From: Bian Naimeng
• Re: [PATCH 3/5] sata_dwc: Add support ATAPI transfer
  • From: Sergei Shtylyov
• Re: [PATCH 3/5] sata_dwc: Add support ATAPI transfer
  • From: Sergei Shtylyov
• [PATCH 3/5] sata_dwc: Add support ATAPI transfer
  • From: Thang Q. Nguyen
• [PATCH 2/5] sata_dwc: Add support device tree to specify dma_channel
  • From: Thang Q. Nguyen
• Re: [PATCH] ata: Compact Flash/PCMCIA driver for XLR
  • From: Sergei Shtylyov
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Christoph Hellwig
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Bernd Schubert
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Zheng Liu
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Christoph Hellwig
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Zheng Liu
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Christoph Hellwig
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Zheng Liu
• Re: [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Robert Hancock
• [PATCH V3 3/3] ata/ahci_platform: Add clock framework support
  • From: Viresh Kumar
• [PATCH V3 2/3] ata: pata_arasan: add Device Tree probing capability
  • From: Viresh Kumar
• [PATCH V3 1/3] ata: pata_arasan: Add clk_{un}prepare() support
  • From: Viresh Kumar
• [PATCH V3 0/3] ata: pata_arasan and ahci_platform updates
  • From: Viresh Kumar
• [PATCH] ata: Compact Flash/PCMCIA driver for XLR
  • From: Jayachandran C
• [PATCH] ata, Add " 2GB ATA Flash Disk"/"ADMA428M" to DMA blacklist
  • From: Prarit Bhargava
• Re: very slow write to AHCI device
  • From: Martin Mokrejs
• [PATCH V3 Resend 06/12] ata/pata_arasan: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [PATCH V3 Resend 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [RFC][PATCH] libata: enable SATA disk fua detection on default
  • From: Zheng Liu
• Re: very slow write to AHCI device
  • From: Daniel Pocock
• Re: [PATCH 1/2] libata: add a host flag to ignore detected ATA devices
  • From: Jeff Garzik
• Re: very slow write to AHCI device
  • From: Martin Mokrejs
• Re: very slow write to AHCI device
  • From: Daniel Pocock
• Re: very slow write to AHCI device
  • From: Martin Mokrejs
• very slow write to AHCI device
  • From: Daniel Pocock
• linux-3.4-rc5: eSATA Sil3132 ExpressCard removal results in warn_slowpath_common
  • From: Martin Mokrejs
• [PATCH 18/18] scsi: cleanup setting task state in scsi_error_handler()
  • From: Dan Williams
• [PATCH 17/18] libsas: suspend / resume support
  • From: Dan Williams
• [PATCH 16/18] scsi, sd: limit the scope of the async probe domain
  • From: Dan Williams
• [PATCH 15/18] libsas: drop sata port multiplier infrastructure
  • From: Dan Williams
• [PATCH 14/18] libata: export ata_port suspend/resume infrastructure for sas
  • From: Dan Williams
• [PATCH 13/18] libsas: continue revalidation
  • From: Dan Williams
• [PATCH 12/18] libata: reset once
  • From: Dan Williams
• [PATCH 11/18] mvsas: remove unused variable in mvs_task_exec()
  • From: Dan Williams
• [PATCH 10/18] libsas: sas_rediscover_dev did not look at the SMP exec status.
  • From: Dan Williams
• [PATCH 09/18] libsas: trim sas_task of slow path infrastructure
  • From: Dan Williams
• [PATCH 08/18] isci: use sas eh strategy handlers
  • From: Dan Williams
• [PATCH 07/18] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler
  • From: Dan Williams
• [PATCH 06/18] libsas: add sas_eh_abort_handler
  • From: Dan Williams
• [PATCH 05/18] libsas: enforce eh strategy handlers only in eh context
  • From: Dan Williams
• [PATCH 04/18] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• [PATCH 01/18] libsas: cleanup spurious calls to scsi_schedule_eh
  • From: Dan Williams
• [PATCH 03/18] scsi: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
  • From: Dan Williams
• [PATCH 02/18] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• [PATCH 00/18] libsas, sas_ata: update for 3.5
  • From: Dan Williams
• [Bug 43211] Pressing the DVD eject button renders the DVD-ROM unusable
  • From: bugzilla-daemon
• [Bug 43211] Pressing the DVD eject button renders the DVD-ROM unusable
  • From: bugzilla-daemon
• [Bug 43211] New: Pressing the DVD eject button renders the DVD-ROM unusable
  • From: bugzilla-daemon
• Re: [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: Andy Whitcroft
• [PATCH 1/2] libata: add a host flag to ignore detected ATA devices
  • From: Andy Whitcroft
• [PATCH 0/2] Hyper-V disk support V5
  • From: Andy Whitcroft
• Re: [git patches] libata fixes
  • From: Calvin Walton
• Re: [PATCH v2] libata: skip old error history when counting probe trials
  • From: Gwendal Grignou
• Re: [git patches] libata fixes
  • From: Sergei Shtylyov
• Re: [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Mark Lord
• Re: [PATCH] Prevent interface errors with Seagate FreeAgent GoFlex
  • From: Daniel J Blueman
• Re: [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Jeff Garzik
• Re: [PATCH] Prevent interface errors with Seagate FreeAgent GoFlex
  • From: Martin Mokrejs
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Sergei Shtylyov
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH] Prevent interface errors with Seagate FreeAgent GoFlex
  • From: Daniel J Blueman
• Re: [PATCH] libata: skip old error history when counting probe trials
  • From: Lin Ming
• [PATCH v2] libata: skip old error history when counting probe trials
  • From: Lin Ming
• Re: [PATCH] libata: skip old error history when counting probe trials
  • From: Sergei Shtylyov
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• [PATCH] libata: skip old error history when counting probe trials
  • From: Lin Ming
• Re: [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Tejun Heo
• Re: [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Mark Lord
• Re: [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Tejun Heo
• [PATCH] libata-eh don't waste time retrying media errors (v3)
  • From: Mark Lord
• Re: [PATCH] libata-eh don't waste time retrying media errors (v2)
  • From: Mark Lord
• ATA wiki alive again!
  • From: Jeff Garzik
• Re: [PATCH] libata-eh don't waste time retrying media errors (v2)
  • From: Tejun Heo
• ATA errors corrupt other I/O & set / readonly
  • From: Felix Miata
• [PATCH] libata-eh don't waste time retrying media errors (v2)
  • From: Mark Lord
• [PATCH] libata-eh don't waste time retrying media errors
  • From: Mark Lord
• Re: ata_eh_link_autopsy: Bug?
  • From: Mark Lord
• Re: ata_eh_link_autopsy: Bug?
  • From: Mark Lord
• Re: ata_eh_link_autopsy: Bug?
  • From: Tejun Heo
• Re: ata_eh_link_autopsy: Bug?
  • From: Mark Lord
• ata_eh_link_autopsy: Bug?
  • From: Mark Lord
• Re: [PATCH 1/1] ahci: Detect Marvell 88SE9172 SATA controller
  • From: Matt Johnson
• Re: Regressions in sata_nv regarding STANDYBY IMMEDIATE.
  • From: Peter Dons Tychsen
• Re: [PATCH] pata_artop: use defines from pci.h
  • From: Jeff Garzik
• [PATCH] pata_artop: use defines from pci.h
  • From: Mike Frysinger
• Re: Regressions in sata_nv regarding STANDYBY IMMEDIATE.
  • From: Robert Hancock
• Re: Support for 4 KiB disk sectors in Linux kernel
  • From: Dan Williams
• Re: Support for 4 KiB disk sectors in Linux kernel
  • From: Martin Mokrejs
• RE: Support for 4 KiB disk sectors in Linux kernel
  • From: Dorau, Lukasz
• [PATCH 1/1] ahci: Detect Marvell 88SE9172 SATA controller
  • From: Matt Johnson
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Gwendal Grignou
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Gwendal Grignou
• Re: Need Help for Apply Patch
  • From: Randy Dunlap
• Need Help for Apply Patch
  • From: Ben Tennyson
• Contact Me Asap
  • From: Song Li
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Russell King - ARM Linux
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Lothar Waßmann
• Regressions in sata_nv regarding STANDYBY IMMEDIATE.
  • From: Peter Dons Tychsen
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Lothar Waßmann
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: viresh kumar
• Re: SSD slowdown with 3.3.X?
  • From: Stan Hoeppner
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Russell King - ARM Linux
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: viresh kumar
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: viresh kumar
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: viresh kumar
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Lothar Waßmann
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Sergei Shtylyov
• Re: [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• [PATCH V3 06/12] ata/pata_arasan: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [PATCH V3 07/12] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Jacek Danecki
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Russell King - ARM Linux
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Russell King - ARM Linux
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Andrew Lunn
• Re: [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [PATCH V2 3/9] ata/pata_arasan: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: James Bottomley
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: libata: init ata_print_id to 0
  • From: Dan Williams
• Re: libata: init ata_print_id to 0
  • From: Mark Lord
• Re: SSD slowdown with 3.3.X?
  • From: Jeff Moyer
• Re: SSD slowdown with 3.3.X?
  • From: Mark Lord
• RE: Support for 4 KiB disk sectors in Linux kernel
  • From: Dorau, Lukasz
• RE: Support for 4 KiB disk sectors in Linux kernel
  • From: Dorau, Lukasz
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: James Bottomley
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Jeff Garzik
• Re: [PATCH] libata: clear error mask of old error history
  • From: Lin Ming
• [PATCH v2] libata: clear error mask of old error history
  • From: Lin Ming
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: James Bottomley
• Re: [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: James Bottomley
• Re: [PATCH 11/12] libsas: fix false positive 'device attached' conditions
  • From: Dan Williams
• Re: [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• Re: [PATCH 10/12] scsi: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
  • From: Dan Williams
• Re: libata: init ata_print_id to 0
  • From: Dan Williams
• Re: [PATCH 11/12] libsas: fix false positive 'device attached' conditions
  • From: James Bottomley
• Re: [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: James Bottomley
• libata: init ata_print_id to 0
  • From: Tero Roponen
• Re: 3.2.14: Marvell 88SE9123 PCIe SATA 6.0 Gb/s controller not working
  • From: Robert Hancock
• Re: Seagate SATA disk flush cache timeout issue
  • From: Robert Hancock
• Re: [isci PATCH v3 1/4] libata: export ata_port suspend/resume infrastructure for sas
  • From: Dan Williams
• Re: [GIT PULL] libsas fixes for 3.4-rc4
  • From: Jeff Garzik
• Re: [GIT PULL] libsas fixes for 3.4-rc4
  • From: Dan Williams
• Re: [RESEND PATCH 0/2]: Use correct DMA device in SCSI/libata
  • From: Jeff Garzik
• Re: SSD slowdown with 3.3.X?
  • From: Stan Hoeppner
• Re: [GIT PULL] libsas fixes for 3.4-rc4
  • From: James Bottomley
• Re: [PATCH 10/12] scsi: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
  • From: James Bottomley
• [PATCH V2 5/5] ata/ahci_platform: Add clock framework support
  • From: Viresh Kumar
• [PATCH V2 4/5] ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  • From: Viresh Kumar
• [PATCH V2 3/5] ata: pata_arasan: add Device Tree probing capability
  • From: Viresh Kumar
• [PATCH V2 2/5] ata: pata_arasan: Add clk_{un}prepare() support
  • From: Viresh Kumar
• [PATCH V2 1/5] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Viresh Kumar
• [PATCH V2 0/5] ata: pata_arasan and ahci_platform updates
  • From: Viresh Kumar
• [PATCH 05/13] ata/sata_mv: Remove conditional compilation of clk code
  • From: Viresh Kumar
• [PATCH 04/13] ata/pata_arasan: Remove conditional compilation of clk code
  • From: Viresh Kumar
• Re: SSD slowdown with 3.3.X?
  • From: cwillu
• Re: [isci PATCH v3 1/4] libata: export ata_port suspend/resume infrastructure for sas
  • From: Jeff Garzik
• Re: [PATCH 09/12] libsas, libata: fix start of life for a sas ata_port
  • From: Jeff Garzik
• Re: [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Jeff Garzik
• Re: SSD slowdown with 3.3.X?
  • From: Stan Hoeppner
• Re: SSD slowdown with 3.3.X?
  • From: Mark Lord
• Re: SSD slowdown with 3.3.X?
  • From: Mark Lord
• [GIT PULL] libsas fixes for 3.4-rc4
  • From: Dan Williams
• Re: [PATCH 5/5] ata/ahci_platform: Add clock framework support
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] ata/ahci_platform: Add clock framework support
  • From: viresh kumar
• Re: Support for 4 KiB disk sectors in Linux kernel
  • From: Martin Mokrejs
• Re: Support for 4 KiB disk sectors in Linux kernel
  • From: Martin K. Petersen
• Re: SSD slowdown with 3.3.X?
  • From: Jeff Moyer
• Re: Support for 4 KiB disk sectors in Linux kernel
  • From: Jeff Moyer
• Re: [PATCH 5/5] ata/ahci_platform: Add clock framework support
  • From: Sergei Shtylyov
• [PATCH 5/5] ata/ahci_platform: Add clock framework support
  • From: Viresh Kumar
• [PATCH 4/5] ata: ahci_platform: Add synopsys ahci controller in DT's compatible list
  • From: Viresh Kumar
• [PATCH 3/5] ata: pata_arasan: add Device Tree probing capability
  • From: Viresh Kumar
• [PATCH 2/5] ata: pata_arasan: Add clk_{un}prepare() support
  • From: Viresh Kumar
• [PATCH 1/5] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Viresh Kumar
• [PATCH 0/5] ata: pata_arasan and ahci_platform updates
  • From: Viresh Kumar
• Support for 4 KiB disk sectors in Linux kernel
  • From: Lukasz Dorau
• Re: [PATCH] libata: clear error mask of old error history
  • From: Sergei Shtylyov
• Re: [RESEND PATCH 0/2]: Use correct DMA device in SCSI/libata
  • From: Lin Ming
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Grant Grundler
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• [PATCH] libata: clear error mask of old error history
  • From: Lin Ming
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: Sergei Shtylyov
• [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: Andy Whitcroft
• [PATCH 0/2] Hyper-V disk support V4
  • From: Andy Whitcroft
• [PATCH 1/2] libata: add a host flag to ignore detected ATA devices
  • From: Andy Whitcroft
• RE: [PATCH 0/2] Hyper-V disk support V3
  • From: KY Srinivasan
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• 1) boot flag to disable the Hyper-V IDE drivers: ata_piix.prefer_ms_hyperv=0 2) PIIX_IGNORE_ATA_ON_HYPERV Re: [PATCH 0/2] Hyper-V disk support V3 RE: use hv_storvsc instead of ata_piix to handle the IDE disks devices ( but not for the CD-ROM)
  • From: Victor Miasnikov
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Andy Whitcroft
• [PATCH] ata: use module_pci_driver
  • From: Axel Lin
• Re: SSD slowdown with 3.3.X?
  • From: Mark Lord
• SSD slowdown with 3.3.X?
  • From: Joe Ceklosky
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• RE: [PATCH 0/2] Hyper-V disk support V3
  • From: KY Srinivasan
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Alan Cox
• Re: [git patches] libata fixes
  • From: Jeff Garzik
• Re: [git patches] libata fixes
  • From: Josh Boyer
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Martin Mokrejs
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Lin Ming
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: cwillu
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Tejun Heo
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Jeff Garzik
• Re: Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Hotplug borked after suspend/resume in Linux-3.3 ?
  • From: Mark Lord
• Re: [PATCH 1/7] Add support hardreset
  • From: Sergei Shtylyov
• [PATCH 1/7] Add support hardreset
  • From: Thang Q. Nguyen
• [PATCH] ata: libata-transport.c: local functions should not be exposed globally
  • From: H Hartley Sweeten
• RE: [PATCH 0/2] Hyper-V disk support V3
  • From: KY Srinivasan
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Andy Whitcroft
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Andy Whitcroft
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Jeff Garzik
• Re: [PATCH 2/2] UBUNTU: SAUCE: ata_piix: defer disks to the Hyper-V drivers by default
  • From: Sergei Shtylyov
• Re: [PATCH 0/2] Hyper-V disk support V3
  • From: Alan Cox
• [PATCH 0/2] Hyper-V disk support V3
  • From: Andy Whitcroft
• [PATCH 2/2] UBUNTU: SAUCE: ata_piix: defer disks to the Hyper-V drivers by default
  • From: Andy Whitcroft
• [PATCH 1/2] libata: add a host flag to ignore detected ATA devices
  • From: Andy Whitcroft
• Seagate SATA disk flush cache timeout issue
  • From: 田志仲
• RE: [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: KY Srinivasan
• Re: [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: Alan Cox
• [PATCH 2/2] ata_piix: defer disks to the Hyper-V drivers by default
  • From: Andy Whitcroft
• [PATCH 1/2] libata: add a host flag to ignore detected ATA devices
  • From: Andy Whitcroft
• [PATCH 0/2] Hyper-V disk support
  • From: Andy Whitcroft
• Re: 3.2.14: Marvell 88SE9123 PCIe SATA 6.0 Gb/s controller not working
  • From: Mark Lord
• Re: 3.2.14: Marvell 88SE9123 PCIe SATA 6.0 Gb/s controller not working
  • From: Mark Lord
• Re: [GIT PATCH 00/12] libsas fixes for 3.4
  • From: jack_wang
• [PATCH 12/12] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• [PATCH 11/12] libsas: fix false positive 'device attached' conditions
  • From: Dan Williams
• [PATCH 10/12] scsi: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
  • From: Dan Williams
• [PATCH 09/12] libsas, libata: fix start of life for a sas ata_port
  • From: Dan Williams
• [PATCH 08/12] libata: make ata_print_id atomic
  • From: Dan Williams
• [PATCH 06/12] libsas: unify domain_device sas_rphy lifetimes
  • From: Dan Williams
• [PATCH 04/12] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys
  • From: Dan Williams
• [PATCH 07/12] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready
  • From: Dan Williams
• [PATCH 05/12] libsas: fix sas_get_port_device regression
  • From: Dan Williams
• [PATCH 03/12] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• [PATCH 02/12] libsas: cleanup spurious calls to scsi_schedule_eh
  • From: Dan Williams
• [PATCH 01/12] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work
  • From: Dan Williams
• [GIT PATCH 00/12] libsas fixes for 3.4
  • From: Dan Williams
• 3.2.14: Marvell 88SE9123 PCIe SATA 6.0 Gb/s controller not working
  • From: Martin Mokrejs
• Re: pata_cs5536: DMI detection of broken PCs
  • From: Alan Cox
• pata_cs5536: DMI detection of broken PCs
  • From: Christian Gmeiner
• Re: [RFC] enable FUA support in libata
  • From: Zheng Liu
• Re: [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Jeff Garzik
• Re: [RFC] enable FUA support in libata
  • From: Jeff Garzik
• [RFC] enable FUA support in libata
  • From: Zheng Liu
• Re: [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: Andy Whitcroft
• Re: [PATCH] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Viresh Kumar
• Re: [RESEND PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• [PATCH] ata: libata-eh.c: local functions should not be exposed globally
  • From: H Hartley Sweeten
• Re: [PATCH] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Jeff Garzik
• Re: [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Jeff Garzik
• Re: [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: Jeff Garzik
• Re: [isci PATCH v2 12/18] libata: make ata_print_id atomic
  • From: Jeff Garzik
• Re: [PATCH 1/1] ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs
  • From: Jeff Garzik
• Re: [RESEND PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Jeff Garzik
• RE: [PATCH v3 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• Re: [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: Andy Whitcroft
• [PATCH v3 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: Rafal Prylowski
• [PATCH v3 2/3] ep93xx: IDE driver platform support code
  • From: Rafal Prylowski
• [PATCH v3 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• [PATCH v3 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU
  • From: Rafal Prylowski
• [RESEND PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• [RESEND PATCH 2/2] libata: Pass correct DMA device to scsi host
  • From: Lin Ming
• [RESEND PATCH 1/2] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Lin Ming
• [RESEND PATCH 0/2]: Use correct DMA device in SCSI/libata
  • From: Lin Ming
• Re: [libsas PATCH v10 3/9] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: Re: [isci PATCH v2 12/18] libata: make ata_print_id atomic
  • From: jack_wang
• Re: [isci PATCH v2 12/18] libata: make ata_print_id atomic
  • From: Jacek Danecki
• Re: [libsas PATCH v10 3/9] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Jacek Danecki
• Re: [isci PATCH v2 12/18] libata: make ata_print_id atomic
  • From: Dan Williams
• [PATCH] scsi: fix eh wakeup (scsi_schedule_eh vs scsi_restart_operations)
  • From: Dan Williams
• Re: [libsas PATCH v10 3/9] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• Re: Cannot detect SATA disk's FUA/DPO feature
  • From: Zheng Liu
• RE: [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: KY Srinivasan
• Re: [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Sergei Shtylyov
• Re: [PATCH] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Viresh Kumar
• Re: Single host/multiple hwifs vs. multiple hosts?
  • From: Mark Lord
• Re: [PATCH] sil3531: has no PM capability, remove support.
  • From: philby john
• Re: [PATCH] sil3531: has no PM capability, remove support.
  • From: Jeff Garzik
• [PATCH] sil3531: has no PM capability, remove support.
  • From: philby john
• Re: [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Sergei Shtylyov
• Re: [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Sergei Shtylyov
• Re: Single host/multiple hwifs vs. multiple hosts?
  • From: Geert Uytterhoeven
• Re: [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Sergei Shtylyov
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• [PATCH 1/1] [v3] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Thang Q. Nguyen
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Alan Stern
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• Re: [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• RE: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• RE: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• RE: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: Rafal Prylowski
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• RE: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• RE: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: H Hartley Sweeten
• Re: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• RE: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: H Hartley Sweeten
• RE: [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: H Hartley Sweeten
• RE: [PATCH v2 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: H Hartley Sweeten
• RE: [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• [PATCH v2 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: Rafal Prylowski
• [PATCH v2 2/3] ep93xx: IDE driver platform support code
  • From: Rafal Prylowski
• [PATCH v2 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• [PATCH v2 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU
  • From: Rafal Prylowski
• Re: [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Sergei Shtylyov
• [PATCH 1/1] Add support 2 SATA ports for Maui and change filename from sata_dwc_460ex.c to sata_dwc_4xx.c
  • From: Thang Q. Nguyen
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Ryan Mallon
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Jiri Slaby
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Jan Ceuleers
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Arnd Bergmann
• [PATCH v2 12/15] ide: mark const init data with __initconst instead of __initdata
  • From: Uwe Kleine-König
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Alan Stern
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: Victor Miasnikov
• Re: [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: Rafal Prylowski
• Re: [PATCH 2/3] ep93xx: IDE driver platform support code
  • From: Rafal Prylowski
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Ryan Mallon
• Re: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Ryan Mallon
• [PATCH 13/17] ide: mark const init data with __initconst instead of __initdata
  • From: Uwe Kleine-König
• [PATCH 1/1] ata_piix: defer disks to the Hyper-V paravirtualised drivers by default
  • From: Andy Whitcroft
• RE: [PATCH 1/3] PATA host controller driver for ep93xx
  • From: H Hartley Sweeten
• RE: [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: H Hartley Sweeten
• RE: [PATCH 2/3] ep93xx: IDE driver platform support code
  • From: H Hartley Sweeten
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Alan Stern
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH v3 4/7] libata: detech Device Attention support
  • From: Lin Ming
• Re: [PATCH v3 4/7] libata: detech Device Attention support
  • From: Sergei Shtylyov
• [PATCH 3/3] ep93xx: Add IDE support to edb93xx boards
  • From: Rafal Prylowski
• [PATCH 2/3] ep93xx: IDE driver platform support code
  • From: Rafal Prylowski
• [PATCH 1/3] PATA host controller driver for ep93xx
  • From: Rafal Prylowski
• [PATCH 0/3] Add PATA host controller support for Cirrus Logic EP93xx CPU
  • From: Rafal Prylowski
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• Re: [PATCH v3 4/7] libata: detech Device Attention support
  • From: Lin Ming
• Re: [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Alan Stern
• Re: [PATCH v3 4/7] libata: detech Device Attention support
  • From: Sergei Shtylyov
• Re: [PATCH v3 1/7] libata-acpi: set acpi state for SATA port
  • From: Lin Ming
• Re: [PATCH v3 1/7] libata-acpi: set acpi state for SATA port
  • From: Aaron Lu
• [PATCH v3 1/7] libata-acpi: set acpi state for SATA port
  • From: Lin Ming
• [PATCH v3 2/7] libata-acpi: add ata port runtime D3Cold support
  • From: Lin Ming
• [PATCH v3 3/7] libata-acpi: register/unregister device to/from power resource
  • From: Lin Ming
• [PATCH v3 4/7] libata: detech Device Attention support
  • From: Lin Ming
• [PATCH v3 5/7] libata: tell scsi layer device supports runtime power off
  • From: Lin Ming
• [PATCH v3 6/7] PM / Runtime: Add can_power_off flag to subsys data
  • From: Lin Ming
• [PATCH v3 7/7] [SCSI] sr: adds Zero-power ODD support
  • From: Lin Ming
• [PATCH v3 0/7] SATA ZPODD support
  • From: Lin Ming
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: black
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [PATCH 1/2] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Lin Ming
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: black
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Williams, Dan J
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Greg Kroah-Hartman
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Dan Williams
• [libsas PATCH v14] libsas, libata: fix start of life for a sas ata_port
  • From: Dan Williams
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [PATCH] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros
  • From: Viresh Kumar
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• [libsas PATCH v13] scsi, sd: limit the scope of the async probe domain
  • From: Dan Williams
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Stefan Richter
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Williams, Dan J
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Stefan Richter
• Re: [libsas PATCH v12 10/11] scsi, sd: limit the scope of the async probe domain
  • From: Williams, Dan J
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: [PATCH 29/34] scsi proc_ops: convert drivers/ata/sata_svw.c
  • From: Jeff Garzik
• Re: [PATCH 2/2] libata: Pass correct DMA device to scsi host
  • From: Jeff Garzik
• [PATCH 1/2] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Lin Ming
• [PATCH 2/2] libata: Pass correct DMA device to scsi host
  • From: Lin Ming
• [PATCH 0/2]: Use correct DMA device in SCSI/libata
  • From: Lin Ming
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Williams, Dan J
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Williams, Dan J
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [PATCH] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Lin Ming
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: James Bottomley
• Re: [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Greg Kroah-Hartman
• Re: [libsas PATCH v12 10/11] scsi, sd: limit the scope of the async probe domain
  • From: Alan Stern
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [PATCH] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Sergei Shtylyov
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: black
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• RE: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Jack Wang
• Re: [isci PATCH v3 0/4] isci: suspend/resume support+
  • From: Dan Williams
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Williams, Dan J
• [libsas PATCH v12 11/11] libsas: suspend / resume support
  • From: Dan Williams
• [libsas PATCH v12 10/11] scsi, sd: limit the scope of the async probe domain
  • From: Dan Williams
• [libsas PATCH v12 09/11] libsas, libata: fix start of life for a sas ata_port
  • From: Dan Williams
• [libsas PATCH v12 08/11] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready
  • From: Dan Williams
• [libsas PATCH v12 07/11] libsas: fix false positive 'device attached' conditions
  • From: Dan Williams
• [libsas PATCH v12 06/11] libsas: unify domain_device sas_rphy lifetimes
  • From: Dan Williams
• [libsas PATCH v12 05/11] scsi_transport_sas: fix delete vs scan race
  • From: Dan Williams
• [libsas PATCH v12 04/11] sysfs: handle 'parent deleted before child added'
  • From: Dan Williams
• [libsas PATCH v12 03/11] libata: reset once
  • From: Dan Williams
• [libsas PATCH v12 02/11] libsas: trim sas_task of slow path infrastructure
  • From: Dan Williams
• [libsas PATCH v12 01/11] libsas: cleanup spurious calls to scsi_schedule_eh
  • From: Dan Williams
• [libsas PATCH v12 00/11] libsas eh, discovery, suspend, and fixes
  • From: Dan Williams
• [PATCH] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
  • From: Lin Ming
• [git patches] libata updates for 3.4
  • From: Jeff Garzik
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Jörg Sommer
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Gwendal Grignou
• Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold support
  • From: Aaron Lu
• Re: [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Lin Ming
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Lin Ming
• Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold support
  • From: Lin Ming
• Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold support
  • From: Aaron Lu
• Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold support
  • From: Lin Ming
• Re: [RFC PATCH v2 5/8] libata-acpi: add ata port runtime D3Cold support
  • From: Aaron Lu
• Re: [RFC PATCH v2 7/8] PM / Runtime: Add can_power_off flag to subsys data
  • From: Lin Ming
• Re: [RFC PATCH v2 2/8] ACPI: Add interface to register/unregister device to/from power resources
  • From: Lin Ming
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: drop unneeded devm cleanup functions
  • From: Grant Likely
• Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: ANEZAKI, Akira
• Re: [libsas PATCH v10 2/9] libsas: cleanup spurious calls to scsi_schedule_eh
  • From: Dan Williams
• [PATCH resend] ata/ahci_platform: add hibernation callbacks
  • From: Shiraz Hashim
• RE: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Jack Wang
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Williams, Dan J
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Alan Stern
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Williams, Dan J
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Jörg Sommer
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Lin Ming
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Jörg Sommer
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Lin Ming
• DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Jörg Sommer
• Re: DMA doesn't work since "make ata port as parent device of scsi host"
  • From: Lin Ming
• Re: [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• Re: [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Matt
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Dan Williams
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Alan Stern
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Dan Williams
• Re: [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Alan Stern
• [isci PATCH v3 4/4] isci: enable BCN in sci_port_add_phy()
  • From: Dan Williams
• [isci PATCH v3 3/4] libsas: suspend / resume support
  • From: Dan Williams
• [isci PATCH v3 2/4] libsas: drop sata port multiplier infrastructure
  • From: Dan Williams
• [isci PATCH v3 1/4] libata: export ata_port suspend/resume infrastructure for sas
  • From: Dan Williams
• [isci PATCH v3 0/4] isci: suspend/resume support+
  • From: Dan Williams
• [libsas PATCH v11 2/2] libsas: fix sas_get_port_device regression
  • From: Dan Williams
• [libsas PATCH v11 1/2] libsas: enforce eh strategy handlers only in eh context
  • From: Dan Williams
• [libsas PATCH v11 0/2] libsas error handling + discovery v11
  • From: Dan Williams
• Re: linux-next: Tree for Mar 13 (ata)
  • From: Dan Williams
• Re: linux-next: Tree for Mar 13 (ata)
  • From: Jeff Garzik
• Re: linux-next: Tree for Mar 13 (ata)
  • From: Randy Dunlap
• Re: [PATCH v2 2/2] ata: AT91 ata driver requires AT91_HAS_PATA
  • From: Jeff Garzik
• Re: [PATCH v3] drivers/ata/pata_mpc52xx.c: clean up error handling code
  • From: Jeff Garzik
• Re: [PATCH 4/4] pata_cmd64x: implement sff_irq_check() method
  • From: Jeff Garzik
• Re: [PATCH 2/4] pata_cmd64x: use interrupt status from MRDMODE register
  • From: Jeff Garzik
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Jeff Garzik
• Re: [PATCH v2 1/3] ahci: add AHCI_HFLAG_DELAY_ENGINE host flag
  • From: Jeff Garzik
• Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
  • From: Mark Lord
• [PATCH v2] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Tejun Heo
• Re: [PATCH] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• Re: [PATCH] libata: disable runtime pm for hotpluggable port
  • From: Sergei Shtylyov
• Re: [RFC PATCH v2 8/8] [SCSI] sr: check and enable Zero-power ODD support
  • From: Aaron Lu
• Re: [RFC PATCH v2 8/8] [SCSI] sr: check and enable Zero-power ODD support
  • From: Lin Ming
• Re: [RFC PATCH v2 1/8] ACPI: Introduce ACPI D3_COLD state support
  • From: Lin Ming
• Re: [RFC PATCH v2 4/8] libata-acpi: set acpi state for SATA port
  • From: Aaron Lu
• Re: [RFC PATCH v2 1/8] ACPI: Introduce ACPI D3_COLD state support
  • From: Aaron Lu
• [PATCH] libata: disable runtime pm for hotpluggable port
  • From: Lin Ming
• [PATCH v3] drivers/ata/pata_mpc52xx.c: clean up error handling code
  • From: Julia Lawall
• Re: [PATCH 0/4] pata_cmd64x: interrupt handling
  • From: Sergei Shtylyov
• [PATCH 1/4 RESEND] pata_cmd64x: turn string of *if* statements into *switch*
  • From: Sergei Shtylyov
• [PATCH 4/4] pata_cmd64x: implement sff_irq_check() method
  • From: Sergei Shtylyov
• [PATCH 3/4] pata_cmd64x: implement sff_irq_clear() method
  • From: Sergei Shtylyov
• [PATCH 2/4] pata_cmd64x: use interrupt status from MRDMODE register
  • From: Sergei Shtylyov
• [PATCH 1/4] pata_cmd64x: turn string of *if* statements into *switch*
  • From: Sergei Shtylyov
• [PATCH 0/4] pata_cmd64x: interrupt handling
  • From: Sergei Shtylyov
• Re: [PATCH v2 2/2] ata: AT91 ata driver requires AT91_HAS_PATA
  • From: Sergei Shtylyov
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Sergei Shtylyov
• Re: [isci PATCH v2 16/18] libsas: suspend / resume support
  • From: jack_wang
• [isci PATCH v2 18/18] isci: Changes in COMSAS timings enabling ISCI to detect buggy disc drives.
  • From: Dan Williams
• [isci PATCH v2 17/18] isci: implement suspend/resume support
  • From: Dan Williams
• [isci PATCH v2 16/18] libsas: suspend / resume support
  • From: Dan Williams
• [isci PATCH v2 14/18] libata: export ata_port suspend/resume infrastructure for sas
  • From: Dan Williams
• [isci PATCH v2 15/18] libsas: drop sata port multiplier infrastructure
  • From: Dan Williams
• [isci PATCH v2 13/18] libsas: continue revalidation
  • From: Dan Williams
• [isci PATCH v2 12/18] libata: make ata_print_id atomic
  • From: Dan Williams
• [isci PATCH v2 11/18] isci: kill isci_host.shost
  • From: Dan Williams
• [isci PATCH v2 10/18] isci: fix interrupt disable
  • From: Dan Williams
• [isci PATCH v2 09/18] isci: fix 'link-up' events occur after 'start-complete'
  • From: Dan Williams
• [isci PATCH v2 08/18] isci: fix controller stop
  • From: Dan Williams
• [isci PATCH v2 07/18] isci: refactor initialization for S3/S4
  • From: Dan Williams
• [isci PATCH v2 06/18] isci: kill isci_port.domain_dev_list
  • From: Dan Williams
• [isci PATCH v2 05/18] isci: kill ->status, and ->state_lock in isci_host
  • From: Dan Williams
• [isci PATCH v2 04/18] isci: Don't filter BROADCAST CHANGE primitives
  • From: Dan Williams
• [isci PATCH v2 03/18] isci: kill sci_phy_protocol and sci_request_protocol
  • From: Dan Williams
• [isci PATCH v2 02/18] isci: kill ->is_direct_attached
  • From: Dan Williams
• [isci PATCH v2 01/18] isci: improve 'invalid state' warnings
  • From: Dan Williams
• [isci PATCH v2 00/18] isci: suspend/resume support + general updates
  • From: Dan Williams
• Re: [libsas PATCH v10 6/9] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler
  • From: jack_wang
• [libsas PATCH v10 2/9] libsas: cleanup spurious calls to scsi_schedule_eh
  • From: Dan Williams
• [libsas PATCH v10 7/9] libsas: trim sas_task of slow path infrastructure
  • From: Dan Williams
• [libsas PATCH v10 3/9] libata, libsas: introduce sched_eh and end_eh port ops
  • From: Dan Williams
• [libsas PATCH v10 9/9] libsas: sas_rediscover_dev did not look at the SMP exec status.
  • From: Dan Williams
• [libsas PATCH v10 6/9] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler
  • From: Dan Williams
• [libsas PATCH v10 1/9] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work
  • From: Dan Williams
• [libsas PATCH v10 8/9] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys
  • From: Dan Williams
• [libsas PATCH v10 5/9] libsas: add sas_eh_abort_handler
  • From: Dan Williams
• [libsas PATCH v10 4/9] libsas: enforce eh strategy handlers only in eh context
  • From: Dan Williams
• [libsas PATCH v10 0/9] libsas error handling + discovery v10
  • From: Dan Williams
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Julia Lawall
• [PATCH v2 2/2] ata: AT91 ata driver requires AT91_HAS_PATA
  • From: Alan Ott
• [PATCH v2 0/2] ata: AT91 ata driver requires specific platforms
  • From: Alan Ott
• [PATCH] drivers/ata/pata_mpc52xx.c: drop unneeded devm cleanup functions
  • From: Julia Lawall
• Re: [PATCH 1/1] ata: AT91 ata driver requires specific platforms
  • From: Ben Dooks
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Joe Perches
• [PATCH 1/1] ata: AT91 ata driver requires specific platforms
  • From: Alan Ott
• [PATCH 0/1] ARM: AT91: drivers: cleanup patches from Arnd Bergmann
  • From: Alan Ott
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Wolfram Sang
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Joe Perches
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: walter harms
• Re: [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Wolfram Sang
• [PATCH] drivers/ata/pata_mpc52xx.c: add missing kfree
  • From: Julia Lawall
• [patch] sata_mv: silence an uninitialized variable warning
  • From: Dan Carpenter
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Matt
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: cwillu
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Lin Ming
• Re: [PATCH v8 09/13] libsas: enforce eh strategy handlers only in eh context
  • From: Dan Williams
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Brian Norris
• Re: [PATCH 2/2] scsi: retrieve cache mode using ATA_16 cmd if normal routine fails
  • From: Amit Sahrawat
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: cwillu
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: Lin Ming
• Re: ATA standard vs. speed
  • From: James Bottomley
• ATA standard vs. speed
  • From: Jean Delvare
• Single host/multiple hwifs vs. multiple hosts?
  • From: Geert Uytterhoeven
• Re: [RFC PATCH v2 8/8] [SCSI] sr: check and enable Zero-power ODD support
  • From: Lin Ming
• Re: [PATCH V3] fsl-sata: add support for interrupt coalsecing feature
  • From: Jeff Garzik
• Re: [RFC PATCH v2 8/8] [SCSI] sr: check and enable Zero-power ODD support
  • From: Aaron Lu
• Re: [PATCH v2 0/3] ahci: fix boot/resume COMRESET failures
  • From: cwillu