Ping? This patch has been rock-solid on this machine for the last 3
weeks, and the machine won't boot without it. I'm happy to provide any
additional context, but otherwise, can this be committed?
Thanks!
-Matt
On 04/30/2012 02:22 PM, Matt Johnson wrote:
For a bit more context, the Z68X-UD3H-B3 has the SATA controllers provided
by the Z68 chipset plus an extra 2 SATA3 ports from a Marvell
88SE9172-NNX2.
The 4 lines on the chip on my board read:
88SE9172-NNX2
PAY4850.3
1116 A1P
TW
It seems that this chip is used on other boards as well
(see http://www.techpowerup.com/reviews/Gigabyte/G1_Sniper2/5.html).
I'm not sure whether 88SE9172-NNX2 is a distinct part from the 88SE9172, or
whether the 'NNX2' is manufacturing metadata.
In any case, drives connected to these 2 ports are not recognized at
boot time
in the latest kernel. I put /boot and the bootloader on a drive attached to
one of the Marvell ports. Grub worked fine, but I couldn't boot the kernel;
it just dumped me to busybox. Once in busybox, I could mount the drive with
'echo 1b4b 917a > /sys/bus/pci/drivers/ahci/new_id', and Ctrl+d would exit
busybox and boot the kernel successfully.
Others have run into similar issues (see
http://theangryangel.co.uk/blog/marvell-88se9172-sata3-under-linux-as-of-320
,
which has been copy-pasted onto the Marvell chipset Wikipedia page
http://en.wikipedia.org/wiki/List_of_Marvell_Technology_Group_chipsets ).
The PCI ID suggested in the linked page (1b4b 9192) didn't work for me,
which suggests that either the poster's chip was not a 88se9172, there
are multiple revs of 88se9172 with different PCI IDs, or the -NNX2 is a
distinct model with its own PCI ID.
In any case, I think accepting this patch will make boards like mine
work in
the near term, and we can add additional PCI IDs and clarify the comments
for similar chips as people report them or as we get clarification from
Marvell.
With this patch, the vanilla and Ubuntu kernels both boot flawlessly with
the boot partition hanging off the Marvell controller.
Thanks,
Matt
On 04/27/2012 01:42 AM, Matt Johnson wrote:
The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked
once it was detected, but was missing an ahci_pci_tbl entry.
Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard.
Signed-off-by: Matt Johnson <johnso87@xxxxxxxxxxxx>
---
drivers/ata/ahci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 79a1e9d..ebaf67e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs }, /* 88se9128 */
{ PCI_DEVICE(0x1b4b, 0x9125),
.driver_data = board_ahci_yes_fbs }, /* 88se9125 */
+ { PCI_DEVICE(0x1b4b, 0x917a),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(0x1b4b, 0x91a3),
.driver_data = board_ahci_yes_fbs },
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
