The hardreset operation is currently not supported. This causes sometime the SATA driver does cause kernel crash because of none-determined state.a This patch will fix the issue. Signed-off-by: Thang Q. Nguyen <tqnguyen@xxxxxxx> --- drivers/ata/sata_dwc_460ex.c | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-) diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 69f7cde..ae13ef1 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -1581,10 +1581,31 @@ static void sata_dwc_qc_prep(struct ata_queued_cmd *qc) static void sata_dwc_error_handler(struct ata_port *ap) { - ap->link.flags |= ATA_LFLAG_NO_HRST; ata_sff_error_handler(ap); } +int sata_dwc_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap); + int ret; + + ret = sata_sff_hardreset(link, class, deadline); + + sata_dwc_enable_interrupts(hsdev); + + /* Reconfigure the DMA control register */ + out_le32(&hsdev->sata_dwc_regs->dmacr, + SATA_DWC_DMACR_TXRXCH_CLEAR); + + /* Reconfigure the DMA Burst Transaction Size register */ + out_le32(&hsdev->sata_dwc_regs->dbtsr, + SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) | + SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)); + + return ret; +} + /* * scsi mid-layer and libata interface structures */ @@ -1604,6 +1625,7 @@ static struct ata_port_operations sata_dwc_ops = { .inherits = &ata_sff_port_ops, .error_handler = sata_dwc_error_handler, + .hardreset = sata_dwc_hardreset, .qc_prep = sata_dwc_qc_prep, .qc_issue = sata_dwc_qc_issue, -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html