Linux ARM MSM
[Prev Page][Next Page]
- [PATCH v3 08/10] media: qcom: camss: Fix invalid clock enable bit disjunction, (continued)
- [PATCH] dt-bindings: usb: dwc3: Add IPQ5018 compatible,
Nitheesh Sekar
- [PATCH 0/7] 8550 dma coherent and more,
Konrad Dybcio
- [PATCH v2] freezer,sched: Use saved_state to reduce some spurious wakeups,
Elliot Berman
- [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable,
Hui Liu via B4 Relay
- [PATCH] soc: qcom: socinfo: Add SM8550-adjacent PMICs,
Konrad Dybcio
- [PATCH 0/4] EUSB2 repeater init sequence override,
Konrad Dybcio
- [PATCH v5 00/32] Introduce QC USB SND audio offloading support,
Wesley Cheng
- [PATCH v5 25/32] ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API, Wesley Cheng
- [PATCH v5 23/32] ASoC: dt-bindings: Add Q6USB backend, Wesley Cheng
- [PATCH v5 05/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index, Wesley Cheng
- [PATCH v5 11/32] sound: usb: card: Introduce USB SND platform op callbacks, Wesley Cheng
- [PATCH v5 07/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port, Wesley Cheng
- [PATCH v5 09/32] ASoC: qdsp6: q6afe: Increase APR timeout, Wesley Cheng
- [PATCH v5 14/32] dt-bindings: usb: xhci: Add num-hc-interrupters definition, Wesley Cheng
- [PATCH v5 08/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp, Wesley Cheng
- [PATCH v5 04/32] usb: host: xhci-mem: Cleanup pending secondary event ring events, Wesley Cheng
- [PATCH v5 02/32] xhci: add helper to stop endpoint and wait for completion, Wesley Cheng
- [PATCH v5 06/32] ASoC: Add SOC USB APIs for adding an USB backend, Wesley Cheng
- [PATCH v5 10/32] ASoC: qcom: Add USB backend ASoC driver for Q6, Wesley Cheng
- [PATCH v5 19/32] sound: usb: card: Check for support for requested audio format, Wesley Cheng
- [PATCH v5 20/32] sound: soc: soc-usb: Add PCM format check API for USB backend, Wesley Cheng
- [PATCH v5 28/32] sound: soc: qdsp6: Add SND kcontrol for fetching offload status, Wesley Cheng
- [PATCH v5 22/32] sound: usb: Prevent starting of audio stream if in use, Wesley Cheng
- [PATCH v5 26/32] sound: Pass USB SND card and PCM information to SOC USB, Wesley Cheng
- [PATCH v5 30/32] sound: usb: qc_audio_offload: Use card and PCM index from QMI request, Wesley Cheng
- [PATCH v5 13/32] dt-bindings: usb: dwc3: Add snps,num-hc-interrupters definition, Wesley Cheng
- [PATCH v5 32/32] sound: soc: soc-usb: Rediscover USB SND devices on USB port add, Wesley Cheng
- [PATCH v5 31/32] sound: usb: card: Allow for rediscovery of connected USB SND devices, Wesley Cheng
- [PATCH v5 27/32] sound: soc: qdsp6: Add SND kcontrol to select offload device, Wesley Cheng
- [PATCH v5 21/32] sound: soc: qcom: qusb6: Ensure PCM format is supported by USB audio device, Wesley Cheng
- [PATCH v5 15/32] usb: dwc3: Add DT parameter to specify maximum number of interrupters, Wesley Cheng
- [PATCH v5 12/32] sound: usb: Export USB SND APIs for modules, Wesley Cheng
- [PATCH v5 18/32] sound: usb: Introduce QC USB SND offloading support, Wesley Cheng
- [PATCH v5 17/32] sound: usb: qcom: Add USB QMI definitions, Wesley Cheng
- [PATCH v5 24/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250, Wesley Cheng
- [PATCH v5 29/32] sound: soc: qcom: q6usb: Add headphone jack for offload connection status, Wesley Cheng
- [PATCH v5 16/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present, Wesley Cheng
- [PATCH v5 01/32] xhci: add support to allocate several interrupters, Wesley Cheng
- [PATCH v5 03/32] xhci: sideband: add initial api to register a sideband entity, Wesley Cheng
- [PATCH 0/2] 8550 USB QMPPHY fixups,
Konrad Dybcio
- [PATCH] clk: qcom: Fix SM_GPUCC_8450 dependencies,
Nathan Chancellor
- [PATCH 0/9] Enable USB3 for IPQ5332,
Praveenkumar I
- [PATCH 1/9] dt-bindings: phy: qcom,uniphy: Rename ipq4019 usb PHY to UNIPHY, Praveenkumar I
- [PATCH 2/9] phy: qcom: uniphy: Rename ipq4019 USB phy driver to UNIPHY driver, Praveenkumar I
- [PATCH 4/9] dt-bindings: phy: qcom,uniphy: Add ipq5332 USB3 SS UNIPHY, Praveenkumar I
- [PATCH 3/9] phy: qcom: uniphy: Update UNIPHY driver to be a common driver, Praveenkumar I
- [PATCH 5/9] dt-bindings: usb: dwc3: Update IPQ5332 compatible, Praveenkumar I
- [PATCH 7/9] arm64: dts: qcom: ipq5332: Enable USB SS UNIPHY, Praveenkumar I
- [PATCH 6/9] arm64: dts: qcom: ipq5332: Add USB3 related nodes, Praveenkumar I
- [PATCH 8/9] phy: qcom: uniphy: Add ipq5332 USB UNIPHY support, Praveenkumar I
- [PATCH 9/9] arm64: defconfig: Enable UNIPHY driver, Praveenkumar I
- Re: [PATCH 0/9] Enable USB3 for IPQ5332, Krzysztof Kozlowski
[PATCH 0/3] Add APSS clock driver support for IPQ5018,
Gokul Sriram Palanisamy
[PATCH v3 0/2] irqchip/qcom-pdc: support v3.2 HW,
Dmitry Baryshkov
[PATCH v10 0/4] Enable IPQ5332 USB2,
Varadarajan Narayanan
[PATCH RFC v6 00/10] Support for Solid Fill Planes,
Jessica Zhang
- [PATCH RFC v6 07/10] drm/atomic: Loosen FB atomic checks, Jessica Zhang
- [PATCH RFC v6 03/10] drm: Add solid fill pixel source, Jessica Zhang
- [PATCH RFC v6 04/10] drm/atomic: Add pixel source to plane state dump, Jessica Zhang
- [PATCH RFC v6 02/10] drm: Introduce solid fill DRM plane property, Jessica Zhang
- [PATCH RFC v6 01/10] drm: Introduce pixel_source DRM plane property, Jessica Zhang
- [PATCH RFC v6 08/10] drm/msm/dpu: Allow NULL FBs in atomic commit, Jessica Zhang
- [PATCH RFC v6 05/10] drm/atomic: Add solid fill data to plane state dump, Jessica Zhang
- [PATCH RFC v6 06/10] drm/atomic: Move framebuffer checks to helper, Jessica Zhang
- [PATCH RFC v6 10/10] drm/msm/dpu: Add solid fill and pixel source properties, Jessica Zhang
- [PATCH RFC v6 09/10] drm/msm/dpu: Use DRM solid_fill property, Jessica Zhang
- Re: [PATCH RFC v6 00/10] Support for Solid Fill Planes, Sebastian Wick
- Re: [PATCH RFC v6 00/10] Support for Solid Fill Planes, Harry Wentland
[PATCH 00/11] arm64: qcom: add and enable SHM Bridge support,
Bartosz Golaszewski
- [PATCH 05/11] dt-bindings: document the Qualcomm TEE Shared Memory Bridge, Bartosz Golaszewski
- [PATCH 07/11] firmware: qcom-scm: use SHM bridge if available, Bartosz Golaszewski
- [PATCH 09/11] arm64: dts: qcom: sm8450: enable SHM bridge, Bartosz Golaszewski
- [PATCH 10/11] arm64: dts: qcom: sa8775p: enable SHM bridge, Bartosz Golaszewski
- [PATCH 01/11] firmware: qcom-scm: drop unneeded 'extern' specifiers, Bartosz Golaszewski
- [PATCH 02/11] firmware: qcom-scm: order includes alphabetically, Bartosz Golaszewski
- [PATCH 11/11] arm64: dts: qcom: sm8150: enable SHM bridge, Bartosz Golaszewski
- [PATCH 06/11] firmware: qcom-shm-bridge: new driver, Bartosz Golaszewski
- [PATCH 08/11] arm64: defconfig: enable Qualcomm SHM bridge module, Bartosz Golaszewski
- [PATCH 03/11] firmware: qcom-scm: atomically assign and read the global __scm pointer, Bartosz Golaszewski
- [PATCH 04/11] firmware: qcom-scm: add support for SHM bridge operations, Bartosz Golaszewski
- Re: [PATCH 00/11] arm64: qcom: add and enable SHM Bridge support, Dmitry Baryshkov
- Re: (subset) [PATCH 00/11] arm64: qcom: add and enable SHM Bridge support, Bjorn Andersson
[PATCH 0/7] Add support for IPQ5018 tsens,
Sricharan Ramabadhran
[PATCH] freezer,sched: Use saved_state to reduce some spurious wakeups,
Elliot Berman
[PATCH v2 0/2] phy: qcom-qmp-usb: fix initialization of PCS_USB,
Adrien Thierry
ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform,
Dmitry Baryshkov
[PATCH v11 00/13] Add multiport support for DWC3 controllers,
Krishna Kurapati
- [PATCH v11 01/13] dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport, Krishna Kurapati
- [PATCH v11 04/13] usb: dwc3: core: Access XHCI address space temporarily to read port info, Krishna Kurapati
- [PATCH v11 02/13] dt-bindings: usb: Add bindings for multiport properties on DWC3 controller, Krishna Kurapati
- [PATCH v11 05/13] usb: dwc3: core: Skip setting event buffers for host only controllers, Krishna Kurapati
- [PATCH v11 03/13] usb: xhci: Move extcaps related macros to respective header file, Krishna Kurapati
- [PATCH v11 06/13] usb: dwc3: core: Refactor PHY logic to support Multiport Controller, Krishna Kurapati
- [PATCH v11 10/13] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper, Krishna Kurapati
- [PATCH v11 09/13] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport, Krishna Kurapati
- [PATCH v11 08/13] usb: dwc3: qcom: Refactor IRQ handling in QCOM Glue driver, Krishna Kurapati
- [PATCH v11 07/13] usb: dwc3: qcom: Add helper function to request threaded IRQ, Krishna Kurapati
- [PATCH v11 13/13] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller, Krishna Kurapati
- [PATCH v11 12/13] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports, Krishna Kurapati
- [PATCH v11 11/13] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280, Krishna Kurapati
[PATCH v14 0/9] Add support for Core Power Reduction v3, v4 and Hardened,
Konrad Dybcio
- [PATCH v14 2/9] dt-bindings: opp: v2-qcom-level: Document CPR3 open/closed loop volt adjustment, Konrad Dybcio
- [PATCH v14 3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver, Konrad Dybcio
- [PATCH v14 6/9] soc: qcom: cpr: Use u64 for frequency, Konrad Dybcio
- [PATCH v14 8/9] soc: qcom: Add support for Core Power Reduction v3, v4 and Hardened, Konrad Dybcio
- [PATCH v14 5/9] soc: qcom: cpr-common: Add support for flat fuse adjustment, Konrad Dybcio
- [PATCH v14 4/9] soc: qcom: cpr: Move common functions to new file, Konrad Dybcio
- [PATCH v14 9/9] arm64: dts: qcom: msm8998: Configure CPRh, Konrad Dybcio
- [PATCH v14 1/9] MAINTAINERS: Add entry for Qualcomm CPRv3/v4/Hardened driver, Konrad Dybcio
- [PATCH v14 7/9] soc: qcom: cpr-common: Add threads support, Konrad Dybcio
- Re: [PATCH v14 0/9] Add support for Core Power Reduction v3, v4 and Hardened, Varadarajan Narayanan
[PATCH v3 0/6] arm64: qcom: sm8550: enable RNG,
Neil Armstrong
[RESEND PATCH v6 0/3] Add support for vibrator in multiple PMICs,
Fenglin Wu
[PATCH v3] usb: typec: qcom: check regulator enable status before disabling it,
Hui Liu via B4 Relay
[PATCH v6 0/3] firmware: Add support for Qualcomm UEFI Secure Application,
Maximilian Luz
[PATCH v5 00/37] ARM: dts: qcom: cleanup PMIC usage,
Dmitry Baryshkov
- [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format, Dmitry Baryshkov
- [PATCH v5 03/37] ARM: dts: qcom: apq8064: correct XOADC register address, Dmitry Baryshkov
- [PATCH v5 06/37] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place, Dmitry Baryshkov
- [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes, Dmitry Baryshkov
- [PATCH v5 09/37] ARM: dts: qcom: apq8064: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 04/37] ARM: dts: qcom: msm8960: introduce label for PMIC keypad, Dmitry Baryshkov
- [PATCH v5 05/37] ARM: dts: qcom: msm8660-surf: use keypad label directly, Dmitry Baryshkov
- [PATCH v5 08/37] ARM: dts: qcom: strip prefix from PMIC files, Dmitry Baryshkov
- [PATCH v5 07/37] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses, Dmitry Baryshkov
- [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 11/37] ARM: dts: qcom: msm8660: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 10/37] ARM: dts: qcom: mdm9615: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 12/37] ARM: dts: qcom: msm8960: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 32/37] ARM: dts: qcom: msm8960: drop useless rpm regulators node, Dmitry Baryshkov
- [PATCH v5 35/37] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel, Dmitry Baryshkov
- [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v5 18/37] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v5 19/37] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 17/37] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 34/37] ARM: dts: qcom: pm8921: Disable keypad by default, Dmitry Baryshkov
- [PATCH v5 21/37] ARM: dts: qcom: pm8058: reorder nodes, Dmitry Baryshkov
- [PATCH v5 20/37] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v5 22/37] ARM: dts: qcom: pm8921: reorder nodes, Dmitry Baryshkov
- [PATCH v5 23/37] ARM: dts: qcom: pm8018: move reg property, Dmitry Baryshkov
- [PATCH v5 25/37] ARM: dts: qcom: pm8058: use defined IRQ flags, Dmitry Baryshkov
- [PATCH v5 26/37] ARM: dts: qcom: pm8921: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v5 24/37] ARM: dts: qcom: pm8921: move reg property, Dmitry Baryshkov
- [PATCH v5 28/37] ARM: dts: qcom: pm8058: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 27/37] ARM: dts: qcom: pm8018: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v5 29/37] ARM: dts: qcom: apq8064: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v5 31/37] ARM: dts: qcom: msm8660: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v5 30/37] ARM: dts: qcom: mdm9615: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v5 33/37] ARM: dts: qcom: msm8974: move regulators to board files, Dmitry Baryshkov
[PATCH 1/3] ARM: dts: qcom: drop incorrect cell-index from SPMI,
Krzysztof Kozlowski
[PATCH] ARM: dts: qcom: sdx65: correct SPMI node name,
Krzysztof Kozlowski
[PATCH v4 00/23] ARM: qcom: apq8064: support CPU frequency scaling,
Dmitry Baryshkov
- [PATCH v4 01/23] dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml, Dmitry Baryshkov
- [PATCH v4 02/23] dt-bindings: soc: qcom: qcom,saw2: define optional regulator node, Dmitry Baryshkov
- [PATCH v4 04/23] dt-bindings: cache: describe L2 cache on Qualcomm Krait platforms, Dmitry Baryshkov
- [PATCH v4 03/23] dt-bindings: clock: qcom,krait-cc: Krait core clock controller, Dmitry Baryshkov
- [PATCH v4 06/23] clk: qcom: krait-cc: rewrite driver to use clk_hw instead of clk, Dmitry Baryshkov
- [PATCH v4 05/23] interconnect: icc-clk: add support for scaling using OPP, Dmitry Baryshkov
- Message not available
[PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling, Dmitry Baryshkov
[PATCH v4 07/23] soc: qcom: spm: add support for voltage regulator, Dmitry Baryshkov
[PATCH v4 11/23] ARM: dts: qcom: apq8064-ifc6410: constraint cpufreq regulators, Dmitry Baryshkov
[PATCH v4 12/23] ARM: dts: qcom: apq8064-sony-xperia-lagan-yuga: constraint cpufreq regulators, Dmitry Baryshkov
[PATCH v4 09/23] ARM: dts: qcom: apq8064-asus-nexus7-flo: constraint cpufreq regulators, Dmitry Baryshkov
[PATCH v4 15/23] ARM: dts: qcom: apq8064: add Krait clock controller, Dmitry Baryshkov
[PATCH v4 13/23] ARM: dts: qcom: apq8064: rename SAW nodes to power-manager, Dmitry Baryshkov
[PATCH v4 10/23] ARM: dts: qcom: apq8064-cm-qs600: constraint cpufreq regulators, Dmitry Baryshkov
[PATCH v4 17/23] ARM: dts: qcom: apq8064: add simple CPUFreq support, Dmitry Baryshkov
[PATCH v4 16/23] ARM: dts: qcom: apq8064: add L2 cache scaling, Dmitry Baryshkov
[PATCH v4 20/23] ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device, Dmitry Baryshkov
[PATCH v4 21/23] ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device, Dmitry Baryshkov
[PATCH v4 18/23] ARM: dts: qcom: apq8064: enable passive CPU cooling, Dmitry Baryshkov
[PATCH v4 23/23] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices, Dmitry Baryshkov
[PATCH v4 19/23] ARM: dts: qcom: msm8960: declare SAW2 regulators, Dmitry Baryshkov
[PATCH v4 14/23] ARM: dts: qcom: apq8064: declare SAW2 regulators, Dmitry Baryshkov
[PATCH v4 22/23] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices, Dmitry Baryshkov
[PATCH 1/2] ARM: dts: qcom: sdx65: correct PCIe EP phy-names,
Krzysztof Kozlowski
[PATCH] dt-bindings: interconnect: qcom,rpmh: do not require reg on SDX65 MC virt,
Krzysztof Kozlowski
[PATCH] dt-bindings: PCI: qcom: fix SDX65 compatible,
Krzysztof Kozlowski
[PATCH v4 0/2] arm64: dts: qcom: msm8939-longcheer-l9100: Add initial dts,
André Apitzsch
[PATCH v4 0/6] cpufreq: qcom-nvmem: support apq8064 cpufreq scaling,
Dmitry Baryshkov
[PATCH v4 00/38] ARM: dts: qcom: cleanup PMIC usage,
Dmitry Baryshkov
- [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended, Dmitry Baryshkov
- [PATCH v4 04/38] ARM: dts: qcom: apq8064: correct XOADC register address, Dmitry Baryshkov
- [PATCH v4 02/38] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes, Dmitry Baryshkov
- [PATCH v4 01/38] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format, Dmitry Baryshkov
- [PATCH v4 05/38] ARM: dts: qcom: msm8960: introduce label for PMIC keypad, Dmitry Baryshkov
- [PATCH v4 06/38] ARM: dts: qcom: msm8660-surf: use keypad label directly, Dmitry Baryshkov
- [PATCH v4 08/38] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses, Dmitry Baryshkov
- [PATCH v4 07/38] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place, Dmitry Baryshkov
- [PATCH v4 12/38] ARM: dts: qcom: msm8660: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 10/38] ARM: dts: qcom: apq8064: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 09/38] ARM: dts: qcom: strip prefix from PMIC files, Dmitry Baryshkov
- [PATCH v4 29/38] ARM: dts: qcom: pm8058: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v4 14/38] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 13/38] ARM: dts: qcom: msm8960: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 31/38] ARM: dts: qcom: mdm9615: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 30/38] ARM: dts: qcom: apq8064: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 32/38] ARM: dts: qcom: msm8660: move RPM regulators to board files, Dmitry Baryshkov
- [PATCH v4 11/38] ARM: dts: qcom: mdm9615: fix PMIC node labels, Dmitry Baryshkov
- [PATCH v4 34/38] ARM: dts: qcom: msm8974: move regulators to board files, Dmitry Baryshkov
- [PATCH v4 16/38] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 15/38] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 35/38] ARM: dts: qcom: pm8921: Disable keypad by default, Dmitry Baryshkov
- [PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel, Dmitry Baryshkov
- [PATCH v4 37/38] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v4 19/38] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 38/38] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name, Dmitry Baryshkov
- [PATCH v4 18/38] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 17/38] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files, Dmitry Baryshkov
- [PATCH v4 22/38] ARM: dts: qcom: pm8058: reorder nodes, Dmitry Baryshkov
- [PATCH v4 20/38] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 23/38] ARM: dts: qcom: pm8921: reorder nodes, Dmitry Baryshkov
- [PATCH v4 21/38] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files, Dmitry Baryshkov
- [PATCH v4 24/38] ARM: dts: qcom: pm8018: move reg property, Dmitry Baryshkov
- [PATCH v4 27/38] ARM: dts: qcom: pm8921: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v4 25/38] ARM: dts: qcom: pm8921: move reg property, Dmitry Baryshkov
- [PATCH v4 28/38] ARM: dts: qcom: pm8018: switch to interrupts-extended, Dmitry Baryshkov
- [PATCH v4 26/38] ARM: dts: qcom: pm8058: use defined IRQ flags, Dmitry Baryshkov
- [PATCH v4 33/38] ARM: dts: qcom: msm8960: drop useless rpm regulators node, Dmitry Baryshkov
[PATCH v2 0/5] arm64: dts: qcom: sdm845-mtp: misc improvements,
Dmitry Baryshkov
[PATCH] PCI: epf-mhi: Really use "align" from EPF core,
Manivannan Sadhasivam
[PATCH] thermal/drivers/qcom/lmh: Fix missing IRQ check in lmh_probe(),
Zhang Shurong
[PATCH] usb: misc: eud: Fix missing IRQ check in eud_probe(),
Zhang Shurong
[PATCH v3 0/1] Add add-maintainer.py script,
Guru Das Srinagesh
[PATCH] drm/msm/dp: Add newlines to debug printks,
Stephen Boyd
[PATCH 1/5] arm64: dts: qcom: sdm845-mtp: fix WiFi configuration,
Dmitry Baryshkov
[PATCH 1/3] arm64: dts: qcom: sm8350: fix pinctrl for UART18,
Dmitry Baryshkov
[PATCH 1/2] irqchip/qcom-pdc: don't read version register if it is not available,
Dmitry Baryshkov
[PATCH] drm/msm/adreno: Fix SM6375 GPU ID,
Konrad Dybcio
[PATCH] wifi: ath10k: Default to board.bin for legacy board data file,
Dmitry Baryshkov
[PATCH 0/3] SM6115 LPASSCC,
Konrad Dybcio
[PATCH 0/2] SM6115 TX Macro,
Konrad Dybcio
[Index of Archives]
[Linux ARM Kernel]
[Linux Omap]
[Linux MIPS]
[Linux S390]
[Bugtraq]
[Share Photos]>
[Fedora ARM]
[Hot Springs Forum]