Re: [PATCH v2 4/6] drm/msm/dsi: add a comment to explain pkt_per_line encoding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 15 Nov 2023 at 01:00, Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> Make it clear why the pkt_per_line value is being "divided by 2".
>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 66f198e21a7e..842765063b1b 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -877,6 +877,8 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>         /* DSI_VIDEO_COMPRESSION_MODE & DSI_COMMAND_COMPRESSION_MODE
>          * registers have similar offsets, so for below common code use
>          * DSI_VIDEO_COMPRESSION_MODE_XXXX for setting bits
> +        *
> +        * pkt_per_line is log2 encoded, >>1 works for supported values (1,2,4)
>          */
>         reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_PKT_PER_LINE(pkt_per_line >> 1);

Should we switch to ffs() or fls() instead?

>         reg |= DSI_VIDEO_COMPRESSION_MODE_CTRL_EOL_BYTE_NUM(eol_byte_num);
> --
> 2.26.1
>


-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux