On Wed, 15 Nov 2023 11:25:15 +0800, Luo Jie wrote: > On platform IPQ5332, the MDIO address of qca8084 can be programed > when the device tree property "fixup" defined, the clock sequence > needs to be completed before the PHY probeable. > > Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx> > --- > .../bindings/net/qcom,ipq4019-mdio.yaml | 138 +++++++++++++++++- > 1 file changed, 130 insertions(+), 8 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml: phyaddr-fixup: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml: pcsaddr-fixup: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml: mdio-clk-fixup: missing type definition /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml: fixup: missing type definition Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.example.dtb: /example-1/mdio@90000/pcsphy0@5: failed to match any schema with compatible: ['qcom,qca8k_pcs'] Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.example.dtb: /example-1/mdio@90000/pcsphy1@6: failed to match any schema with compatible: ['qcom,qca8k_pcs'] Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.example.dtb: /example-1/mdio@90000/xpcsphy@7: failed to match any schema with compatible: ['qcom,qca8k_pcs'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231115032515.4249-10-quic_luoj@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
