On 11/16/2023 12:20 AM, Andrew Lunn wrote:
On Wed, Nov 15, 2023 at 11:25:14AM +0800, Luo Jie wrote:
The PHY & PCS clocks need to be enabled and the reset
sequence needs to be completed to make qca8084 PHY
probeable by MDIO bus.
Is all this guaranteed to be the same between different boards? Can
the board be wired differently and need a different configuration?
Andrew
Hi Andrew,
This configuration sequence is specified to the qca8084 chip,
not related with the platform(such as ipq5332).
All these configured registers are located in qca8084 chip, we need
to complete these configurations to make MDIO bus being able to
scan the qca8084 PHY(PHY registers can be accessed).
