From: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx> Add device tree binding Documentation details for Qualcomm X1E80100 TLMM device. Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx> Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx> Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx> Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx> --- v2: * Update the part number from sc8380xp to x1e80100. * Pickup Rbs. .../bindings/pinctrl/qcom,x1e80100-tlmm.yaml | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml new file mode 100644 index 000000000000..2bde8845a31e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,x1e80100-tlmm.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. X1E80100 TLMM block + +maintainers: + - Rajendra Nayak <quic_rjendra@xxxxxxxxxxx> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,x1e80100-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 119 + + gpio-line-names: + maxItems: 238 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-x1e80100-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-x1e80100-tlmm-state" + additionalProperties: false + +$defs: + qcom-x1e80100-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ aon_cci, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_usb, + audio_ext, audio_ref, cam_aon, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, + cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7, + edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac, + eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2, + gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0, + i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, + mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk, + pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0, + qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, + qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk, + sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle, + tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, + tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, + tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy, + usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx, + usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0x0f100000 0xf00000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 239>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio26"; + function = "qup2_se7"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio27"; + function = "qup2_se7"; + bias-disable; + }; + }; + }; +... -- 2.17.1
