Re: [PATCH 2/4] clk: qcom: videocc-sm8150: Update the videocc resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/15/2023 10:39 PM, Bryan O'Donoghue wrote:
On 15/11/2023 16:48, Konrad Dybcio wrote:
+    [VIDEO_CC_INTERFACE_BCR] = { 0x9ac },
+    [VIDEO_CC_MVS0_BCR] = { 0x870 },
+    [VIDEO_CC_MVS1_BCR] = { 0x8b0 },
+    [VIDEO_CC_MVSC_BCR] = { 0x810 },
FWIW this seems to be a copypaste from

https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blame/92b31370d31d22e910120f6a875bf0919b3f1773/drivers/clk/qcom/videocc-sm8150.c

so if it's an issue, it should probably be fixed downstream too

More of a question than a gotcha - 0x9ac is valid for sm8250 so curious to me that its a different address on sm8150.


I have re-checked the offset values, as per the HW plan for SM8150 below values are correct:

+    [VIDEO_CC_INTERFACE_BCR] = { 0x8f0 },
+    [VIDEO_CC_MVS0_BCR] = { 0x870 },
+    [VIDEO_CC_MVS1_BCR] = { 0x8b0 },
+    [VIDEO_CC_MVSC_BCR] = { 0x810 },


---
bod




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux