Re: [PATCH 15/16] arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 11/17/2023 6:32 PM, Dmitry Baryshkov 写道:
On 17/11/2023 12:18, Tengfei Fan wrote:
Add nodes to support Type-C USB/DP functionality.

On this platform, a Type-C redriver is added to the SuperSpeed graph.

Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 88 +++++++++++++++++++++-
  1 file changed, 87 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
index 6dc3040b9f76..f3c558dd40f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
@@ -100,7 +100,15 @@
                      reg = <1>;
                      pmic_glink_ss_in: endpoint {
-                        remote-endpoint = <&usb_1_dwc3_ss>;
+                        remote-endpoint = <&redriver_ss_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    pmic_glink_sbu: endpoint {
+                        remote-endpoint = <&fsa4480_sbu_mux>;
                      };
                  };
              };
@@ -519,6 +527,62 @@
      };
  };
+&i2c_master_hub_0 {
+    status = "okay";
+};
+
+&i2c_hub_2 {
+    status = "okay";
+
+    typec-mux@42 {
+        compatible = "fcs,fsa4480";
+        reg = <0x42>;
+
+        vcc-supply = <&vreg_bob1>;
+
+        mode-switch;
+        orientation-switch;
+
+        port {
+            fsa4480_sbu_mux: endpoint {
+                remote-endpoint = <&pmic_glink_sbu>;
+            };
+        };
+    };
+
+    typec-retimer@1c {
+        compatible = "onnn,nb7vpq904m";
+        reg = <0x1c>;
+
+        vcc-supply = <&vreg_l15b_1p8>;
+
+        orientation-switch;
+        retimer-switch;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                redriver_ss_out: endpoint {
+                    remote-endpoint = <&pmic_glink_ss_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                redriver_ss_in: endpoint {
+                    data-lanes = <3 2 1 0>;
+                    remote-endpoint = <&usb_dp_qmpphy_out>;
+                };
+            };
+        };
+    };
+};
+
  &gcc {
      clocks = <&bi_tcxo_div2>, <&sleep_clk>,
           <&pcie0_phy>,
@@ -552,6 +616,16 @@
      status = "okay";
  };
+&mdss_dp0 {
+    status = "okay";
+};
+
+&mdss_dp0_out {
+    data-lanes = <0 1>;

Why? Are you really limited to two lanes for DP by the hardware?
I got confirmation from a colleague that it is right that limited to two lanes.

+    remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+
  &mdss_dsi0 {
      vdda-supply = <&vreg_l3e_1p2>;
      status = "okay";
@@ -861,6 +935,18 @@
      status = "okay";
  };
+&usb_dp_qmpphy_dp_in {
+    remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+    remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+    remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
  &xo_board {
      clock-frequency = <76800000>;
  };


--
Thx and BRs,
Tengfei Fan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux