The ECPRI clock controller support for QDU1000 and QRU1000. The clock controller has a special branch which requires an additional memory to be enabled/disabled before the branch ops. Changes since v3: - Updated the bindings description as per the review comments - Updated mem ops and ecpricc driver patches as per the review comments Changes since v2: - Updated the mem ops implementation as per the latest review comments - Updated the ecpricc driver as per the review comments Changes since v1: - Updated the dt-bindings - Modified mem ops logic as per the review comments - Update all the hex values to lowercase - Aligned the clock entries in DT as per the review comment Previous series: v3 - https://lore.kernel.org/linux-arm-msm/20231106103027.3988871-1-quic_imrashai@xxxxxxxxxxx/ v2 - https://lore.kernel.org/linux-arm-msm/20231011090028.1706653-1-quic_imrashai@xxxxxxxxxxx/ v1 - https://lore.kernel.org/linux-arm-msm/20230808051407.647395-1-quic_imrashai@xxxxxxxxxxx/ Imran Shaik (3): dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000 clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000 arm64: dts: qcom: qdu1000: Add ECPRI clock controller Taniya Das (1): clk: qcom: branch: Add mem ops support for branch2 clocks .../bindings/clock/qcom,qdu1000-ecpricc.yaml | 68 + arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 + drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-branch.c | 39 + drivers/clk/qcom/clk-branch.h | 21 + drivers/clk/qcom/ecpricc-qdu1000.c | 2456 +++++++++++++++++ .../dt-bindings/clock/qcom,qdu1000-ecpricc.h | 147 + 8 files changed, 2755 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml create mode 100644 drivers/clk/qcom/ecpricc-qdu1000.c create mode 100644 include/dt-bindings/clock/qcom,qdu1000-ecpricc.h -- 2.25.1
