Re: [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset for ipq5332 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/17/2023 1:20 AM, Andrew Lunn wrote:
FYI, here is the sequence to bring up qca8084.
a. enable clock output to qca8084.
b. do gpio reset of qca8084.
c. customize MDIO address and initialization configurations.
d. the PHY ID can be acquired.

This all sounds like it is specific to the qca8084, so it should be in
the driver for the qca8084.

Its been pointed out you can get the driver to load by using the PHY
ID in the compatible. You want the SoC clock driver to export a CCF
clock, which the PHY driver can use. The PHY driver should also be
able to get the GPIO. So i think the PHY driver can do all this.

      Andrew

Yes, Andrew, that is feasible, i will update the patches to move the
initialized clock configs in the PHY probe function.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux